User manual
54
6
Chapter
6
Others
Customizing the function settings (Continued)
Speaker Setting
To select various parameters for the analog 5.1 channel output.
5.1ch
When a 5.1 channel surround system is connected to this
player.
Go to the next step (see below) for detailed selections.
2ch
When a 2 channel stereo system is connected to this player.
When you selected “5.1ch”:
Set the speaker sizes, distance to each speaker and the
crossover frequency.
1 Select a speaker by pressing
/
/ /
buttons, and
press OK button.
2 Select the size by pressing /
buttons, and press OK
button.
Front Left / Front Right
Small: Select if the speaker cannot output low
frequency.
Large: Select if the speaker can output low
frequency.
Center / L Surround / R Surround
Small: Select if the speaker cannot output low
frequency.
Large: Select if the speaker can output low
frequency.
None: When the speaker is not connected.
Subwoofer
Use: When a subwoofer is connected.
Don’t Use: When a subwoofer is not connected.
Crossover Setting
Low frequency under which you set here will be of a
subwoofer. Select one from 80 Hz/100 Hz/120 Hz.
Ft
Select a distance to each speaker from the listening
position.
3 Select “Next” by pressing
/
/ /
buttons, and press
OK button.
The next screen appears.
4 Select “Automatic Test Tone” by pressing /
/ /
buttons, and press OK button.
A test signal is sent to each speaker. Adjust each of the
volumes by pressing /
, selecting speakers by /
,
so that each speaker can sound at the same volume. For
further adjustment, check the channel balance on the
amplifi er.
5 When complete, select “OK” and press OK button.
Disc Menu Language
To select a preferred language for disc menus.
English
To display disc menus in English.
French
To display disc menus in French.
Japanese
To display disc menus in Japanese.
Others
To make a further language choice.
After pressing OK button, follow steps 1) – 4) below.
1) Obtain the language code of the preferred language
from the Language code list (
page 58).
2) Select the fi rst character by pressing /
buttons.
3) Press
/
buttons to shift. Select the second character
by pressing
/
buttons.
4) Select “OK” and press OK button.
Note
Some discs may be played in a different language from that
you selected. A prior language may be programmed by the
disc.
Subtitle Language
To select a preferred language for subtitles.
None
To disable subtitles.
English
To display subtitles in English.
French
To display subtitles in French.
Japanese
To display subtitles in Japanese.
Others
To make a further language choice.
After pressing OK button, follow steps 1) – 4) below.
1) Obtain the language code of the preferred language
from the Language code list (
page 58).
2) Select the fi rst character by pressing
/
buttons.
3) Press
/
buttons to shift. Select the second character
by pressing
/
buttons.
4) Select “OK” and press OK button.
Audio
Language
HD-A1_06_E 54HD-A1_06_E 54 2/12/06 12:28:27 AM2/12/06 12:28:27 AM