Owner's Manual

13
Vibration
Operating no hard error: 10 to 500 Hz 2.45 m/s
2
[0.25G] (O-P)
(excludes resonance point)
Non-operating no damage: 5 - 10Hz 5mm (P-P)
10 - 500Hz 9.8m/s
2
[1G] (O-P)
Shock (Non-operating) 490 m/s
2
[50G] (Half sine wave 11ms)
Acoustical Noise <45dB
Power
DC Voltage and Current Requirements 5V 5%, 12V 5%
+5V
+5V
Idle (Laser ON, Motor ON) 420mA (DVD) 90mA (DVD)
410mA (CD) 110mA (CD)
Continuous Read (Data/Audio) 610mA (DVD) 320mA (DVD)
570mA (CD) 630mA (CD)
Standby (Laser OFF, Motor OFF) 160mA (DVD/CD) 3mA (DVD)
Random Access (average) 560mA (DVD) 370mA (DVD)
530mA (CD) 680mA (CD)
Physical
Height 5.75" (146mm)
Width 1.6" (41.5mm)
Depth 7.6" (193mm)
Weight 2.18lbs (.95kg)
Connectors
DC input AMP 1-480424-0 or equivalent
IDE Interface Connector 50 Pin SCSI (core type)
Analog Audio Line Output Connector 3 Pin Audio Connector
Lasers
CD Laser
Type Semiconductor Laser and 3-beam System
Wave Length 770 - 795 nm
DVD Laser
Type Semiconductor Laser and 1-beam System
Wave Length 650 nm
Regulatory
The SD-M1401 DVD-ROM drive has been certified by the following regulatory agencies:
• UL 1950
• CSA C22.2 No. 950
• TUV (EN60950I)
• CE standard
• CB
• DHHS 21 CFR Sub-Chapter J
• FCC Class B