Introduction Connections TOSHIBA DVD VIDEO RECORDER Basic Setup DVD VIDEO RECORDER DR420KU Disc Management OWNER’S MANUAL Recording DR420KU Playback Editing Function Setup E7PCAUD_DR420KU_cover_EN.indd 2-3 1VMN26773 / E7PCAUD © 2009 Toshiba Corporation Others Printed in China Owner’s Record The model number and serial number are on the back of your DVD Recorder. Record these numbers in the spaces below.
PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
Introduction PRECAUTIONS FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
PRECAUTIONS Dew Condensation Warning • Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few hours until its inside gets dry. - The unit is moved from a cold place to a warm place. - Under conditions of high humidity. - After heating a cold room. Note about Recycling • This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
Maintenance Servicing Cleaning Discs Cleaning the Disc Lens Disc Handling “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.
CONTENTS Introduction Recording PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11 Installing the Batteries in the Remote Control . . . . . . 12 Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . .
Editing 49 49 50 50 51 Function Setup 81 83 83 87 90 91 93 Playback LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI . . . . . . .
FEATURES This unit not only plays back DVD and CD, but also offers features for you to record on DVD and edit them after that. The following features are offered with this unit. Recording This unit is compatible with recording on DVD-RW/+RW which is recordable repeatedly and DVD-R/+R which accept the additional recordings until the disc becomes full but not overwritable. You can choose either one for your convenience.
Introduction FEATURES Discs for Recording, Playing back Disc type DVD-RW DVD-R DVD+RW DVD+R Format Can be formatted in VR or video mode Video Mode Automatically formatted in video mode Automatically formatted in +VR mode Automatically formatted in +VR mode 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) 480 min (12cm) 144 min (8cm) 1X-16X Ver.2.0/ 2.1 1X-4X 1X-16X Playable on DVD+RW compatible players. Finalization recommended.
FEATURES Discs for playing back Disc Type DVD-VIDEO CD-DA CD-RW CD-R Logo Icon Files for playing back Type of title MP3 JPEG CD-RW/-R CD-RW/-R Icon Media is a trademark of DVD Format/Logo Licensing Corporation. * This unit cannot play back the disc contents protected by Windows Media Digital Rights Management (DRM). Unplayable Discs The following discs will not play back on this unit.
Introduction FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 5 6 7 8 1080p DVD VIDEO RECORDER DR420 1080i 720p 480p Connections I/y ON/STANDBY 9 OPEN/CLOSE SKIP STOP PLAY REC L2 S-VIDEO VIDEO 15 14* 13 12 L3 L R DV IN 11 10 (*) The unit can also be turned on by pressing these buttons. Disc Management Recording Playback 6. SKIP G button • During playback, press to skip to the next chapter or track. • During playback, press and hold for 1.5 seconds to fast forward.
FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit.
(*) The unit can also be turned on by pressing these buttons. Disc Management Recording Playback Editing Function Setup Others EN E7PCAUD_DR420KU_EN.indd 13 Basic Setup 16. I/y ON/STANDBY button • Press to turn on the unit, or to turn the unit into the standby mode. (To completely shut down the unit, you must unplug the AC power cord). • If timer programmings have been set, press to turn the unit into the timer-standby mode. 17.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference. On-Screen Display / Menu The on-screen display changes in the following order as you press [DISPLAY].
Title/File Name Information Introduction GUIDE TO ON-SCREEN DISPLAYS AND MENUS HDMI Information Title name information 1 2 Title Name File name information Video Info. : Audio Info. : 480p / Bitstream YCbCr Connections My Title 3 File Name My File Basic Setup MP3 Tag Information *1. Indicates the resolution of the HDMI output image. *2. Indicates the HDMI video format. *3. Indicates the HDMI audio format. * “- - -” will be displayed, when it does not have any information.
GUIDE TO ON-SCREEN DISPLAYS AND MENUS Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [ENTER] to display the menu. These menus provide entries to all main functions of the unit. Setup 1 2 3 4 5 General Setting Timer Programming Title List DVD Menu DISC Playback Mode 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. DVD Menu: To set up the DVD setting. 5.
Introduction FRONT PANEL DISPLAY GUIDE 2 1 PM BS CS DR CD 3 Connections HDD 4 1. : Appears in the afternoon with the clock display. 2. Title / track and chapter mark : Appears when indicating a title / track number. : Appears when indicating a chapter number.
CONNECTIONS Read this first: 1) Disconnect the AC power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) After making all the connections, connect the AC power cords of the devices. • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, DVD playback pictures may be distorted due to the copy protection system. • When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack.
Introduction CONNECTIONS Connecting to a TV with an HDMITM Compatible Port HDMI cable HDMI IN Connections HDMI OUT rear of this unit VIDEO VIDEO IN OUT L L Y HDMI OUT PB/CB R AUDIO IN (L1) IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT COAXIAL S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM Basic Setup Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched.
CONNECTIONS Connecting to a TV with Component Video Input jacks COMPONENT VIDEO IN (Green) (Green) Y Y (Blue) RCA component video cable (Blue) PB /CB PB/CB (Red) (Red) PR /CR PR/CR COMPONENT VIDEO OUT VIDEO IN VIDEO OUT AUDIO IN L L RCA audio cable R R AUDIO OUT rear of this unit VIDEO VIDEO IN OUT L L Y HDMI OUT PB/CB R AUDIO IN (L1) R IN S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT COAXIAL S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM Supplied cables used in this conn
Introduction CONNECTIONS Connecting to a TV with Audio / Video Input Jacks VIDEO IN RCA video cable Connections VIDEO OUT AUDIO IN L L RCA audio cable R R AUDIO OUT Basic Setup rear of this unit VIDEO VIDEO IN OUT L L Y HDMI OUT PB/CB R AUDIO IN (L1) IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT COAXIAL S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM Disc Management Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Pleas
CONNECTIONS Digital Audio Connection Coaxial Cable Connection Dolby Digital decoder rear of this unit COAXIAL digital audio coaxial cable VIDEO VIDEO IN OUT L L Y HDMI OUT PB/CB R AUDIO IN (L1) COAXIAL R IN S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT COAXIAL S-VIDEO DIGITAL AUDIO OUTPUT PCM / BITSTREAM DIGITAL AUDIO OUTPUT PCM / BITSTREAM digital audio coaxial input jack HDMI Audio Connection AV receiver / amplifier with an HDMI input jack rear of this unit VIDEO VIDEO IN OUT L L
Note Disc Management VIDEO OUT analog audio input jacks L rear of this unit VIDEO VIDEO IN OUT AUDIO IN R Basic Setup 2 Channel Analog Audio Connection stereo system Connections • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters.
INITIAL SETTING When you turn on this unit for the first time, you need to follow these steps after you have completed all the connections. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP SATELLITE LINK DISPLAY TOP MENU 1 2 3 AUDIO MENU/LIST ENTER CLEAR After you have made all the necessary connections, press y ON/STANDBY] to turn on the [I/y unit. Turn on your TV.
Introduction SETTING THE CLOCK Set the clock before you try the timer programming. Clock Setting HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP SATELLITE LINK DISPLAY CLEAR FWD REV Use [K / L] to select calendar or time, then press [ENTER]. Clock Setting 4 SKIP Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [ENTER]. Clock Setting PAUSE PLAY STOP TIME SLIP 1.3x / 0.
SETTINGS FOR THE VIDEO INPUT You must let the unit know which video input jack you are using before making a recording. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP SATELLITE LINK DISPLAY TOP MENU AUDIO MENU/LIST ENTER CLEAR SKIP RETURN FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP REPEAT REC MODE REC 1 2 3 4 5 6 ZOOM Press [SETUP]. Use [K / L] to select “General Setting”, then press [ENTER].
Introduction FORMATTING A DISC Choosing the Recording Format of a Brand-New DVD-RW HDMI .@/: ABC DEF GHI JKL MNO TUV SATELLITE LINK WXYZ PQRS Use [K / L] to select “DVD Menu”, then press [ENTER]. Setup General Setting Disc Management INPUT SELECT Basic Setup 1 2 OPEN/ CLOSE Press [SETUP]. Timer Programming Title List TIMER PROG. SPACE SETUP DISPLAY TOP MENU AUDIO MENU/LIST DVD Menu 3 Use [K / L] to select “Format”, then press [ENTER].
FORMATTING A DISC Reformatting a Disc Manually If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc. Insert a recordable disc. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK TIMER PROG. SPACE 1 2 Press [SETUP]. Use [K / L] to select “DVD Menu”, then press [ENTER].
To prevent accidental recording, editing or erasing the titles, you can protect them from “DVD Menu” menu. HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TOP MENU e.g.) VR mode DVD-RW Format Finalize Disc Protect OFF ON Delete All Playlists AUDIO Disc Management DISPLAY Use [K / L] to select “Disc Protect OFF ON”, then press [ENTER]. DVD Menu TIMER PROG. SPACE SETUP SATELLITE LINK Use [K / L] to select “DVD Menu”, then press [ENTER]. Basic Setup INPUT SELECT Press [SETUP].
PLAYING THE DISCS IN OTHER DVD PLAYERS Auto Finalizing You can finalize discs automatically using this function. You can use this function to finalize discs after finishing timer recordings and at the end of the disc space. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP SATELLITE LINK DISPLAY TOP MENU AUDIO 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. “General Setting” menu will appear.
Introduction PLAYING THE DISCS IN OTHER DVD PLAYERS Finalizing a Disc HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ Use [K / L] to select “Finalize”, then press [ENTER]. Use [K / L] to select “Yes”, then press [ENTER]. e.g.) VR mode DVD-RW Finalize disc? SATELLITE LINK Yes No TIMER PROG. SPACE DISPLAY TOP MENU Finalizing will start. AUDIO Recording SETUP “DVD Menu“ menu will appear. Disc Management INPUT SELECT Use [K / L] to select “DVD Menu”, then press [ENTER].
PLAYING THE DISCS IN OTHER DVD PLAYERS Note • Finalizing a disc in video mode and +VR mode automatically creates a title menu. • After you finalize the DVD+RW, you can call up the title list by pressing [TOP MENU], or you can call up the title menu by pressing [MENU/LIST]. • Even after DVD+RW is finalized, you can still record or edit. After you finalize DVD-RW/-R or DVD+R, you cannot edit or record anything else on that disc.
Recording Mode Restrictions on Recording 12cm 8cm Video/ Sound Quality 60 min 18 min 120 min 36 min 240 min 72 min 360 min 108 min 480 min 144 min Note Making discs playable in other DVD players (Finalize) For DVD-RW/-R, it is necessary to finalize the disc after recording, in order to play back the disc on other DVD players. (Refer to pages 30-32.) For DVD+RW/+R, it is recommended to finalize the disc in order to make the disc more compatible to other DVD player.
SETTINGS FOR A RECORDING Make Recording Compatible Use this feature to make the discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title list is automatically converted to our style. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 2) Use [K / L] to select “Recording”, then press [ENTER]. “Recording” menu will appear.
Recording Audio Select (XP) 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [ENTER]. 3) Use [K / L] to select “Recording Audio Select (XP)”, then press [ENTER]. You can set aspect ratio for video mode recording. 1) Follow step 1 to 2 on “Recording Audio Select(XP)”. 2) Use [K / L] to select “Aspect Ratio (Video mode)”, then press [ENTER]. 3) Use [K / L] to select your desired setting, then press [ENTER].
BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ DISPLAY TOP MENU SATELLITE LINK MENU/LIST CLEAR Align the disc to the disc tray guide. AUDIO ENTER SKIP 3 RETURN FWD REV PLAY STOP TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP REC ZOOM Press [OPEN/CLOSE A] to close the disc tray. It may take awhile to load the disc completely.
6 Press [REC I] to start recording. “I” will be displayed for 5 seconds. 7 Press [STOP C] to stop recording. The recorded title will be included in the title list. (Refer to “Guide to a Title List” on page 66.) e.g.) DVD+R/DVD-RW/-R Introduction BASIC RECORDING & ONE-TOUCH TIMER RECORDING Connections SP I 1:53 To set one-touch timer recording (OTR)... Wait for a moment Basic Setup Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording.
TIMER RECORDING Guide to Timer Programming Display You can program the unit to record up to 12 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Connect the external tuner to either L1 or L2 and set it to output audio/video signals when it comes to the time you want to start recording. • Do not change the external tuner’s channel while you are recording. You cannot watch one channel and record another at the same time.
3 Use [K / L] to enter the date, then press [B]. Start --:-Mode SP End --:-- SP Auto recording mode select... When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and determines the appropriate recording mode to complete recording the program. 2 : 00 Date JAN/02 L1/L2 L1 JAN/01 MON-SAT MON-FRI SAT Start 1 : 00AM Mode Auto End 2 : 00AM Auto 1 : 00 • “Auto” is only available for one program in the timer program list.
TIMER RECORDING To stop the timer recording in progress 1) Press [STOP C] on the remote control. Confirmation message will appear. If the timer program did not complete correctly, the error number appears in the timer programming list. Timer Programming 2) Select “Yes”, then press [ENTER]. THU JAN/01 10:00AM • To stop the timer recording immediately, press [C STOP] on the unit.
Hints for Timer Recording Disc Management The Priority of Overlapped Settings Recording This unit records the programs according to priority if the timer programmings are overlapped. The timer programming set previously has priority. A timer recording of lower priority will be canceled or start from the middle. Check the overlapped timer programmings and change the priority if necessary. When the starting time is the same: A program set previously (PROG. A) has priority.
SATELLITE LINK You can set the unit to start recording whenever it detects the video signal from the external tuner. Preparing for the satellite link timer recording: Preparation on the tuner • The external tuner should be equipped with some kind of timer function. Using timer function of the tuner, set it to output audio/video signals when it comes to the time you want to start recording, and stop output audio/ video signals when it comes to the time you want to finish recording.
Introduction SATELLITE LINK Note example 2 example 1 example 3 timer recording timer recording satellite link satellite link satellite link actual recording actual recording actual recording Basic Setup timer recording The first 2 minutes (at the longest) will be cut off. Connections • If the signal of external input breaks up over 5 seconds, satellite link function will be canceled. • You cannot set the start or the end time for the satellite link timer recording on this unit.
SETTINGS FOR AN EXTERNAL DEVICE Connection to an External Device Connect the external device properly to the unit by using input jacks either L2 (Front) or L1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of L2 (Front). Use S-video or the RCA audio/video cables for this connection. When connecting a DVC (digital video camcorder), use the DV IN jack on the front panel instead of S-VIDEO IN or VIDEO IN jack.
Introduction SETTINGS FOR AN EXTERNAL DEVICE Recording from an External Device INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK DISPLAY 3 TOP MENU AUDIO MENU/LIST ENTER SKIP FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP REPEAT REC MODE REC ZOOM Refer to “Recording Mode” on page 33. Press [I REC] on the unit to start recording. Start playback on the external device to record from. Press [C STOP] on the unit to stop recording.
DV DUBBING Guide to DV and On-Screen Display This function helps you to easily dub the contents of the DVC (digital video camcorder) to this unit. You can control basic operations of the DVC from the remote control of this unit such as playback, fast forward or reverse and stop all operations if the DVC is in video mode. Use the DV cable that has 4-pin input jack and is compliance with the IEEE1394 standards.
Introduction DV DUBBING DVC to DVD Dubbing INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK Press [DISPLAY]. With “Control” highlighted, press [ENTER] to display the available devices to control with the remote control of this unit. Use [K / L] to select “DVC”, then press [ENTER]. 1/ 1 SETUP DISPLAY TOP MENU 1/ 1 AUDIO -RW Control DV Audio Start Rec MENU/LIST Disc Management TIMER PROG. SPACE (Refer to “Recording Mode” on page 33.
DV DUBBING Note for DV dubbing • • • • • • • • • • • • 48 If you press [PAUSE F] at step 5, the tape will rewind to the point a few seconds preceding the paused point. The unit does not send out the output signal to DVC. For the proper operation, connect DVC to the unit directly. Do not connect this unit and DVC via any other unit. Do not connect more than 1 DVC. The unit can only accept DVC. Other DV device such as cable/satellite box or D-VHS VCR cannot be recognized.
Introduction INFORMATION ON PLAYBACK Structure of Disc Contents DVD Title 1 Title 2 Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3 Title: Chapter: Audio CD Track 1 Track 2 Track 3 Track 4 Track 5 MP3/JPEG folder 1 file 1 file 2 folder 2 file 3 file 4 file 5 Disc Management Each title, chapter, or track, folder or file is assigned a number, which is called “title number”, “chapter number”, “track number”, “folder number” or “file number” respectively. Some discs may not have these numbers.
BASIC PLAYBACK Direct Playback OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ DISPLAY TOP MENU SATELLITE LINK ENTER PAUSE TIME SLIP Align the disc to the disc tray guide. AUDIO MENU/LIST CLEAR SKIP Press [OPEN/CLOSE A] to open the disc tray and insert your disc with its label facing up. TIMER PROG. SPACE SETUP 1 2 Press [I/y y ON/STANDBY]. Turn on the TV and be sure to select the input to which the unit is connected. RETURN FWD REV STOP PLAY 1.3x / 0.
Introduction BASIC PLAYBACK Playback from the Title List HDMI .@/: ABC DEF GHI JKL MNO TUV SATELLITE LINK WXYZ PQRS TIMER PROG. SPACE SETUP DISPLAY MENU/LIST ENTER CLEAR FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP REPEAT REC MODE REC ZOOM 5 Use [K / L / { / B] to select a desired title, then press [ENTER]. It may take awhile to load the disc completely. Press [TOP MENU]. Title list will appear.
BASIC PLAYBACK Playing Back an Audio CD and a CD-RW/-R with MP3/JPEG Files When selecting track/file: Playback will start. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK Hints for audio CD tracks and MP3 / JPEG files: . • Folders are shown by . • Audio CD tracks are shown by • MP3 files are shown by 3 . . • JPEG files are shown by • The system can recognize up to 255 folders and, up to 99 tracks/999 files.
Using the Title/Disc Menu Introduction BASIC PLAYBACK Pause 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. Connections DVD may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. 1) Press [TOP MENU] or [MENU/LIST] to call up the title list or disc menu. Basic Setup 2) Use [K / L / { / B] to make a selection, and then press [ENTER] to enable your selection.
SPECIAL PLAYBACK Resume Playback You can play back from where you stopped playing back the disc last. 1) During playback, press [STOP C]. The resume message will appear. Resume ON 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn the unit into the standby mode. To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped.
Rapid Playback B x1.3 : Press [1.3X / 0.8X PLAY] thrice to play back in normal speed. No effects. 2) Press [PLAY B] to return to the normal playback. Note 1/4x REV FWD 1/8x REV FWD 1/16x REV FWD pause REV FWD 1/16x REV FWD 1/8x REV 1/3x 2) Press [PLAY B] to return to the normal playback. Note • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx.
SPECIAL PLAYBACK Marker Setting Zoom 1) During playback, press [DISPLAY] or [ZOOM]. • If you press [ZOOM], skip to step 3. to display the selection 2) Use [{ / B] to select menu. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 This feature allows you to assign a specific point on a disc to be called back later. 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. to display the marker list. 2) Use [{ / B] to select e.g.
Introduction SPECIAL PLAYBACK Chasing Playback during Recording 6/ 6 1/ 1 0:01:00 / 1:23:45 -RW ORG LP 1:01 2) Press [STOP C] once to stop playback. The resume message will appear. Screen for the current recording: 1 1:23:45 -RW VR ORG L1 (Rear) Resume ON LP 1:01 Note To stop recording, press [STOP C] again. To cancel the resume, press [STOP C] again. Editing • Playback image may freeze momentarily using this function. However, this does not affect the recording.
SPECIAL PLAYBACK Simultaneous Playback and Recording You can also play back a recorded title during current recording or the timer recording on the same disc. 3) Press [STOP C] once to stop playback. The resume message will appear. Screen for the current recording: 1) During recording, press [DISPLAY]. Screen for the current recording: 3 1 1:30:25 -RW VR ORG L1 (Rear) 3 1 1:23:45 -RW VR ORG L1 (Rear) Resume ON 2) Select icon using [{ / B], then press [ENTER]. will be highlighted.
Title/Chapter Search Introduction SEARCH Track Search 1) During playback, press [SKIP i] to skip the current track/file and move to the next. The track/file will move forward one at a time. To go back to the beginning of the current track/file, press [SKIP j ]. (For JPEG files, press it once to go to the previous file.) Press it twice in quick successions to go to the previous track/file. The track/file will move backward one at a time.
SEARCH Time Search 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. , then press [ENTER]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD The number next to will be highlighted. To move to the number next to , press [B]. When time search is not available, counter are not displayed.
Repeat Playback Note to display the selection 2) Use [{ / B] to select menu. 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired option to repeat, then press [ENTER]. The selected repeat playback will start. Random Playback Disc Management e.g.) DVD-video OFF Title Chapter A-B OFF Track All A-B e.g.) MP3/JPEG files 1/ 5 0:00:15 / 0:05:00 CD Random Editing Note • To cancel random playback, press [STOP C] twice during random playback. “OFF” appears on the display menu.
REPEAT/RANDOM/PROGRAM PLAYBACK/SLIDE SHOW Program Playback Slide Show You can program the disc to play back in your desired order. 1) Press [SETUP] in stop mode. 2) Use [K / L] to select “DISC Playback Mode”, then press [ENTER]. “DISC Playback Mode” menu will appear. 3) Use [K / L] to select “Program Play”, then press [ENTER]. 4) Use [K / L] to select a desired track, then press [ENTER] or [B]. You can select the display time between 5 seconds and 10 seconds.
You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack 1/ 5 to display the selection 1/ 5 0:01:00 / 1:23:45 DVD Video 1/ 5 1/ 5 0:01:00 / 1:23:45 to display the selection 3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [ENTER]. For DVD-video or VR mode DVD-RW • Audio soundtrack will switch. e.g.
SELECTING THE FORMAT OF AUDIO AND VIDEO Switching Virtual Surround System You can enjoy stereophonic virtual space through your existing 2 channel stereo system. 1) During playback, press [DISPLAY] to bring up the display menu. If the display menu is already shown, skip to step 2. Switching Camera Angles Some DVD-video have scenes shot from two or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. 1) During playback, press [DISPLAY]. , then press [ENTER].
Introduction SELECTING THE FORMAT OF AUDIO AND VIDEO Adjusting Black Level Connections You can adjust the black level to control the brightness of the picture in order to get a better picture. 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select menu. e.g.) DVD-video 1/ 5 Basic Setup 1/ 5 to display the selection 0:01:00 / 1:23:45 DVD Video Disc Management 3) Use [K / L] to select “Black Level”, then press [ENTER].
INFORMATION ON DISC EDITING Guide to a Title List Editing Discs Title list allows you to check the titles recorded on the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [TOP MENU]. 4 ORG 5 6 Title List JAN/ 1/09 1:00AM L1 LP 12:00AM (2:00:00) JAN/ 1/08 L1 LP 1 2 3 4 5 6 1/2 3 2 1 ORG 3 Edit 2 Scene Delete Edit Title Name Chapter Mark Protect JAN/31/09 11:00PM L1 LP 0 : 00 : 59 11 10 9 8 7 1.
Introduction DELETING TITLES Notes for deleting titles After the disc is fully recorded: DVD-RW/DVD+RW The Full-Recorded disc TITLE 2 TITLE 2 TITLE 2 TITLE 2 TITLE 2 TITLE 3 TITLE 2 You cannot record a new title. Disc Management TITLE 3 Deleted titles cannot create the space. TITLE 1 TITLE 3 Delete! TITLE 3 You can record a new title. Basic Setup Delete! TITLE 1 TITLE 1 You can record a new title.
DELETING TITLES You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back to the disc. Be sure to read “Notes for deleting titles” on page 67 before you delete the title. 1 2 In stop mode, press [TOP MENU]. Title list, original or playlist will appear. • For VR mode DVD-RW, press [MENU/LIST] to switch between “Original” and “Playlist”. Use [K / L/ s / B] to select a desired title, then press [ENTER]. e.g.
Introduction CREATING/DELETING PLAYLIST Adding Titles to a Playlist Playlist INPUT SELECT HDMI ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP DISPLAY TOP MENU 4 Use [K / L] to select “Yes”, then press [ENTER]. SATELLITE LINK AUDIO MENU/LIST Use [K / L] to select “Add To Playlist”, then press [ENTER]. Play From Start Edit Title Delete Add To Playlist Create a Playlist ? Recording Yes No ENTER CLEAR SKIP The title is added to playlist.
CREATING/DELETING PLAYLIST Erasing All Playlist Playlist A playlist can be deleted if it is no longer needed. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ DISPLAY TOP MENU Use [K / L] to select “Delete All Playlists”, then press [ENTER]. DVD Menu AUDIO MENU/LIST ENTER CLEAR SKIP Use [K / L] to select “DVD Menu”, then press [ENTER]. Format Finalize Disc Protect OFF ON Delete All Playlists TIMER PROG. SPACE SETUP SATELLITE LINK 1 2 3 Press [SETUP].
Introduction EDITING DISCS Putting Names on Titles 4 Use [K / L] to select “Edit Title Name”, then press [ENTER]. ORG Edit 1 INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ Scene Delete Edit Title Name Chapter Mark Protect Basic Setup OPEN/ CLOSE Connections You can put a name on the title and change it from this menu. JAN/ 1/09 1:00AM L1 LP 1 : 25 : 47 SATELLITE LINK TIMER PROG.
EDITING DISCS Putting Names on Titles (cont’d) Guide to Edit Title Name OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ 1) Use [K / L] to select a desired character set, then press [ENTER]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. Select ABC abc 123 @!? 0 (*1) (*1) 1 ! ”# $ % & ’( ) *+,-.
Introduction EDITING DISCS Setting Chapter Marks INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ DISPLAY TOP MENU AUDIO MENU/LIST 4 Submenu will appear. Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the point where you will create a new chapter mark. Or, use [SKIP H / G] to find a chapter mark that you wish to delete. Use [K / L] to select “Add” or “Delete”, then press [ENTER]. e.g.
EDITING DISCS Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ 2 Use [K / L/ s / B] to select a desired title, then press [ENTER]. +VR Title List JAN/15/09 1:00AM 1:00AM (2:00:00) L1 LP JAN/15/09 2 3 4 5 6 1/2 SETUP SATELLITE LINK TIMER PROG. SPACE DISPLAY TOP MENU AUDIO CLEAR SKIP 3 Use [K / L] to select “Edit”, then press [ENTER].
Introduction EDITING DISCS Deleting a Part of a Title INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ e.g.) VR mode DVD-RW playlist. PL Edit 1 SATELLITE LINK DISPLAY AUDIO Scene Delete Edit Title Name Chapter Mark Title Dividing Title Combining Disc Management TIMER PROG. SPACE SETUP Use [K / L] to select “Scene Delete”, then press [ENTER].
EDITING DISCS Deleting a Part of a Title (cont’d) 3 Use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] to find the start point, then press [ENTER]. PL 4 Use [K / L] to select “Delete” then press [ENTER]. PL Edit - Scene Delete 1 Edit - Scene Delete 1 Start End Preview Delete Start End Preview Delete JAN/ 1/09 1:00AM L1 LP 1 : 47 : 00 JAN/ 1/09 1:00AM L1 LP 1 : 25 : 47 Then use [SKIP H / G], [REV E], [FWD D], [PLAY B] and [PAUSE F] again to move to the end point, and press [ENTER].
Introduction EDITING DISCS Dividing a Title Playlist INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK DISPLAY TOP MENU AUDIO MENU/LIST ENTER RETURN Use [K / L] to select “Title Dividing”, then press [ENTER]. Use [K / L] to select “Yes”, then press [ENTER]. e.g.) VR mode DVD-RW playlist PL SKIP FWD REV Edit - Title Dividing SKIP 1 PAUSE PLAY STOP TIME SLIP 1.3x / 0.
EDITING DISCS Combining Titles Playlist You can combine two titles into a single title. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 2 Follow the steps 1 to 3 in “Dividing a Title” on page 77 to display “Edit” menu. Use [K / L] to select “Title Combining”, then press [ENTER]. PL Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Title Combining SATELLITE LINK JAN/ 1/09 1:00AM L1 LP SPACE SETUP 1 : 25 : 47 TIMER PROG.
Introduction EDITING DISCS Setting or Releasing the Title Protection Original INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TUV SATELLITE LINK WXYZ Use [K / L] to select “Protect”, then press [ENTER]. ORG Edit 1 Basic Setup OPEN/ CLOSE 1 2 Connections To prevent the accidental editing, or erasing of the titles, you can protect them in “Edit” menu. You can cancel the title protection feature after it is applied.
EDITING DISCS Setting or Clearing All Chapter Marks at Once For titles in video mode DVD-RW, you can set or edit chapter at every time interval. You can clear the chapter mark too. You can specify the interval of chapter marks for titles last more than 5 minutes. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ 1 2 Follow the steps 1 to 3 in “Putting Names on Titles” on page 71 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [ENTER].
Introduction LIST OF THE DEFAULT SETTINGS The following table is the contents which you can set and the default settings. Refer to the following table for useful operation. Setup Playback Audio Out → page 85 Compressing the range of sound volume. PCM 48kHz 96kHz PCM Stream Set whether the sound recorded in 96kHz will be down sampled to 48kHz. ON OFF Set the type of sound signal which outputs from the digital audio output jack. Set whether DTS signal is output or not.
LIST OF THE DEFAULT SETTINGS Setup Display Video General Setting Recording Clock HDMI Items (highlight is the default) V-Chip Canadian French Rating 18ans+ → page 89 16ans+ 13ans+ 8ans+ G E Change Password → page 89 Progressive ON → page 90 OFF TV Aspect 4:3 Letter Box → page 90 4:3 Pan & Scan 16:9 Wide Select Video L1(Rear) Video In → page 26 S-Video In L2(Front) Video In S-Video In Auto Chapter OFF → page 34 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes Recording Audio Select (XP) PCM → page
Introduction GENERAL SETTING Playback Press [STOP C] if you are playing back a disc. HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ TIMER PROG. SPACE SETUP SATELLITE LINK DISPLAY 3 Use [K / L] to select a desired item, then press [ENTER]. Use [K / L] to select “Playback”, then press [ENTER]. General Setting Playback Display Video Recording Clock HDMI Reset All AUDIO Disc Management TOP MENU 1 2 MENU/LIST ENTER CLEAR FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.
GENERAL SETTING Playback (cont’d) 1 Parental Lock (Default: OFF) Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [ENTER]. A A password has not been set yet. Use [K / L] to select “Yes”, then press [ENTER].
Introduction GENERAL SETTING Playback (cont’d) 2 C Audio Out Use [K / L] to select a setting, then press [ENTER]. Dolby Digital Use [K / L] to select a desired item, then press [ENTER]. PCM Stream Audio Out A Dynamic Range Control PCM Dolby Digital DTS Dynamic Range Control (Default : ON) Dynamic Range Control ON OFF Your setting will be activated. Note B Settings for PCM (Default : 48kHz) Settings for DTS (Default : ON) Select a setting using [K / L], then press [ENTER].
GENERAL SETTING Playback (cont’d) 3 Disc Menu Language (Default : English) Set the language for disc menu. Use [K / L] to select a language, then press [ENTER]. 6 Angle Icon (Default : ON) Set to “ON” to show the angle icon during the playback. Use [K / L] to select a setting, then press [ENTER]. Disc Menu Language English French Spanish Other ON OFF Your setting will be activated. Your setting will be activated. 4 Angle Icon 7 Audio Language (Default : Original) Set the audio language.
Introduction GENERAL SETTING Display 1 INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ OSD Language English Français Español SATELLITE LINK DISPLAY TOP MENU AUDIO MENU/LIST Your setting will be activated. 2 Screen Saver (Default : 10 minutes) Set the time to activate the screen saver function on the TV screen. Use [K / L] to select a setting, then press [ENTER].
GENERAL SETTING Display (cont’d) 4 V-Chip With the V-chip system in this unit, you can set the viewing limitation for the analog TV programs received from the external tuner or recorded on DVDs to prevent your children from watching inappropriate programs. If the unit detects a blocked program, a restriction message appears and you are not allowed to view the program. 1) Use [the Number buttons] to enter the access password.
Introduction GENERAL SETTING Display (cont’d) [Canadian French Rating] E 18ans+ Category Adult audience only higher Unsuitable for ages under 16 Unsuitable for ages under 13 8ans+ Unsuitable for ages under 8 G General audience E Exempt program Change the current password. Use [the Number Buttons] to enter new access password. Note lower Disc Management As for TV Rating’s TV-MA, TV-14, TV-PG, or TV-Y7, you can further set the sub ratings to block specific elements of programming.
GENERAL SETTING Video 1 This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 1) Use [K / L] to select “ON“, then press [ENTER]. OPEN/ CLOSE INPUT SELECT HDMI .@/: ABC DEF GHI JKL MNO TUV SATELLITE LINK WXYZ PQRS SETUP Progressive TIMER PROG.
Introduction GENERAL SETTING HDMI HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ SATELLITE LINK TIMER PROG. SPACE SETUP 1 2 DISPLAY AUDIO MENU/LIST • You cannot select HDMI when an HDMI cable is not connected and the item is shown in grey color. ENTER CLEAR RETURN FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.
GENERAL SETTING HDMI (cont’d) 2 HDMI Audio (Default : ON) If you do not want to output the audio through HDMI (when you digitally output the audio through the COAXIAL DIGITAL AUDIO OUT jack to your audio system, etc.), you can set the HDMI audio output off. Use [K / L] to select a setting, then press [ENTER]. • Set to “OFF” when the HDMI sound is not output. HDMI Audio ON OFF Your setting will be activated.
Introduction GENERAL SETTING Reset All Reset the setting to default. HDMI .@/: ABC DEF GHI JKL MNO PQRS TUV WXYZ AUDIO MENU/LIST ENTER RETURN FWD REV SKIP PAUSE PLAY STOP TIME SLIP 1.3x / 0.8x PLAY INSTANT SKIP REC Reset to factory default? Yes No “Are you sure?” will appear. Select “Yes” using [K / L] and then press [ENTER]. Your setting will be initialized.
TROUBLESHOOTING Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom Power The power does not turn on. Picture There is no picture. • Check that the AC power cord is connected securely. • Check the breaker (in case of power failure). • Re-connect the connecting cords securely. • Check if the connecting cords are damaged.
Symptom Playback The disc does not play back. Introduction TROUBLESHOOTING Remedy Connections • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play back certain discs (such as a CD-ROM) (page 10). • The region code on the DVD-video does not match the unit (page 10). • Moisture has condensed inside the unit.
TROUBLESHOOTING Symptom DV DV signal cannot be input. Remedy • Before connection, turn on the power supplies for both this unit and the DVC, and make sure that these units are in stop mode. • Only a “DVC-SD” signal can be input from the DVC to this unit. Other types of signals are not supported. • Do not connect any device other than the DVC. Even if a recorder or PC with another DV terminal is connected, the DV function will not operate.
Error message Cause Solution • Unplayable disc is inserted in the unit. • The disc is upside down. • Playback is not authorized in the region of the DVD-video which you inserted in the unit. • The current selected parental level prohibits playback. • Insert the standardized disc which have the marks on pages 9-10. • Insert the disc with the labeled side facing up. • Insert the DVD-video with region codes 1 or ALL. • Check “Parental Lock” setting in “Playback” menu (page 84).
LANGUAGE CODE Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi 98 Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 48
PCM (pulse code modulation) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio.
SPECIFICATIONS • This model complies with the below specifications. • Designs and specifications are subject to change without notice. • This model may not be compatible with features and/or specifications that may be added in the future.
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the following limited warranties to original consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
LIMITED WARRANTY /LPLWHG &DQDGLDQ :DUUDQW\ )RU 7RVKLED %UDQG 'LJLWDO $XGLR 9LGHR 3URGXFWV 7RVKLED RI &DQDGD /LPLWHG 7&/ PDNHV WKH IROORZLQJ OLPLWHG ZDUUDQWLHV WR RULJLQDO FRQVXPHUV LQ &DQDGD 7+(6( /,0,7(' :$55$17,(6 (;7(1' 72 7+( 25,*,1$/ &21680(5 385&+$6(5 25 $1< 3(5621 5(&(,9,1* 7+,6 726+,%$ %5$1' ',*,7$/ $8',2 9,'(2 352'8&7 WKH '$9 352'8&7 6 RU '$9 3URGXFW V $6 $ *,)7 )520 7+( 25,*,1$/ &21680(5 385&+$6(5 $1' 72 12 27+(5 385&+$6(5 25 75$16)(5(( '$9 352'8&76 385&+$6(' ,1 &$1$'$ $1' 86(' $
7R WKH H[WHQW SHUPLWWHG E\ ODZ WKLV OLPLWHG ZDUUDQW\ VKDOO EH JRYHUQHG DQG FRQVWUXHG LQ DFFRUGDQFH ZLWK WKH ODZV RI 2QWDULR +RZ WR 2EWDLQ :DUUDQW\ 6HUYLFHV ,I DIWHU IROORZLQJ DOO RI WKH RSHUDWLQJ LQVWUXFWLRQV LQ WKLV PDQXDO DQG FKHFNLQJ WKH 7URXEOHVKRRWLQJ VHFWLRQ \RX ILQG WKDW VHUYLFH LV QHHGHG Recording 7R ILQG WKH QHDUHVW $63 YLVLW 7&/·V ZHE VLWH DW ZZZ WRVKLED FD RU FDOO WROO IUHH 3UHVHQW \RXU ELOO RI VDOH RU RWKHU SURRI RI SXUFKDVH WR WKH $63