User manual

27
TV operation
Press MENU in the TV mode, then press or
to select TV SETUP menu.
Press or to select “TV/CABLE”.
1
2
Press or to select “TV” or “CABLE”.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
TV/CABLE selection
To memorize channels
This unit is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they
must be programmed into the unit’s memory. To use this unit with an
antenna, set the TV/CABLE selection to the TV position. When
shipped from the factory, this selection is in the CABLE position.
To ADD/ERASE channels
Press MENU in the TV mode, then press or to
select TV SETUP
menu. Press or to select
the “CH PROGRAM”, then press
.
The TV will begin memorizing all the
channels available in your area.
Automatic memory tuning
Press or to select the channel you want
and then press
or to select “ADD” or
“ERASE”.
3
MENU
/ / /
Press MENU in the TV mode, then press or
to select TV SETUP menu.
Press
or to select “ADD/ERASE”.
Repeat steps 3 for other channel you want to
add or erase.
4
RETURN
TV SETUP
TV/CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION
TV/CABLE
OFF
:SELECT :ADJUST
RETURN:ENDRETURN:END
1
Press RETURN to clear the menu screen.
4
Press .
The ADD/ERASE menu will appear.
Press
or to select “ADD/ERASE”, then
press
.
2
1
2
3
4
5
5-001
5-002
ADD/ERASE
ADDING CHANNEL
ADD /ERASE
CH SIGNAL
ANALOG ERASE
ANALOG ADD
ANALOG ERASE
ANALOG ERASE
ANALOG ADD
DIGITAL ADD
DIGITAL ADD
CLEAR ALL
SETUP MENU
:SELECT :ADJUST
ADD/ERASE
ADDING CHANNEL
ADD/ERASE
CH SIGNAL
ANALOG ADD/ERASE
ANALOG ADD
ANALOG ERASE
ANALOG ERASE
ANALOG ADD
DIGITAL ADD
DIGITAL ADD
CLEAR ALL
SETUP MENU
:SELECT :ADJUST
1
2
3
4
5
5-001
5-002
Press RETURN to clear the menu screen.
5
To add a digital channel you are watching:
Select a channel you want to add. Then select “ADDING
CHANNEL” in step 2, then press
.
TV SETUP
TV/CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION
TV/CABLE
OFF
:SELECT :ADJUST
RETURN:ENDRETURN:END
TV SETUP
TV/CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION
CABLE
OFF
:SELECT :ADJUST
RETURN:ENDRETURN:END
TV SETUP
TV/CABLE
CH PROGRAM
ADD/ERASE
CLOSED CAPTION
CABLE
OFF
:SELECT :ADJUST
RETURN:ENDRETURN:END
TV SETUP
LANGUAGE
CLOCK SET
AUTO CLOCK
STANDARD TIME
DAYLIGHT
ENGLISH
ON
AUTO
:SELECT
SAVING TIME
:ADJUST
RETURN:END
5V90101A [E]p24-31 8/4/06, 5:44 PM27