Corporation DIGITAL VIDEO DVD VIDEO RECORDER Owner's Manual

52
Playing recorded contents (Continued)
Playback
Notes
• On CONTENT MENU, titles (Original) precede titles
(Playlist), in order from the oldest one respectively.
• To turn off CONTENT MENU, press EASY NAVI button.
Absence of operations for longer than about 15 minutes
also turns off CONTENT MENU.
• The mark is displayed in every thumbnail when “Title
playback” ( page 116) is set to “Title resume”. When set
to “Serial playback”, it is displayed in a thumbnail last
operated.
• You can change a thumbnail picture. See page 93.
• You cannot display CONTENT MENU for DVD-R/RW discs
recorded on other devices.
• For playing a recorded title while recording another, see
page 37.
• A black thumbnail with “Recording” means that the title is
being recorded or its recording will start within 15 seconds.
This thumbnail cannot start playback.
• When the recording mode is set to “XP” or “AT ” (when a
high bit rate is automatically set page 42),
playback will not be available several minutes before
recording starts.
To stop playback
Press STOP.
To pause playback (still playback)
Press .
To resume normal playback, press PLAY button or
button.
Note
• Sound is muted during still mode.
Resuming playback from the location last
stopped (Title resume)
DVD-RAM
The recorder memorizes the location you last stopped
playback to resume there.
To use this function, set “Title playback” (
page 116)
to “Title resume.” The recorder will memorize the
location you last stopped at in each title, so you can
resume playback there. For example, if there are 6
titles, you can start each of them as if you had stored
6 video tapes in the recorder.
• To return to the beginning of the title
During playback, press QUICK MENU button, then
press
/ buttons to select “Restart title,” then
press SELECT/ENTER button.
• To play another title
Perform steps 1 to 4 on
page 51.
You can make the recorder memorize only the very
last point, regardless of the number of titles. Set “Title
playback” (
page 116) to “Serial playback.”
• To return to the beginning of the title
Press SKIP REV button repeatedly until the
beginning of the title appears.
• To play the other title
Press SKIP REV or SKIP FWD button repeatedly.
Notes
• Depending on conditions or contents, playback may not
start from the location last stopped, but instead of another
location. For example, from the beginning of the disc or
title.
• Depending on a disc, there may be a slight difference
between the location the recorder memorizes and the
actual location where playback starts.
• This function is not available on DVD-R/RW discs.
• The resuming function will not work if the write-protect tab
is set to “PROTECT” ( page 8).
Playing all titles (Original/Playlist) in a disc
DVD-RAM
Set “Title playback” ( page 116) to “Serial
playback”. You can play all titles in a DVD-RAM disc in
the order of the thumbnails on CONTENT MENU, as if
they were recorded in one video tape.
STOP