Operation Manual

Maintenance
8. 4
Replacing the toner cartridge
When the toner cartridge is completely empty:
• The warning message,
Toner Empty or [Toner Empty]
Replace Toner
displays on the control panel.
•The
Status LED lights red.
At this stage, the
toner cartridge needs to be replaced. For
order information for toner cartridges, see page 7.1.
NOTES :
• This feature does not work for the
[Toner Empty] Replace
Toner
message.
• To assure optimal printing performance, we recommend that
you use TOSHIBA toner cartridges.
CAUTION : Never attempt to incinerate toner cartridges. This
could cause an explosion. Do not dispose of used toner
cartridges. Contact your service representative.
1 Pull the toner cartridge out.
2 Remove the new toner cartridge from its bag.
3 Roll the toner cartridge 5 or 6 items to distribute the toner
evenly inside the toner cartridge.
Thoroughly rolling the toner cartridge will assure
maximum copies per toner cartridge.
4 Remove the paper protecting the toner cartridge .
NOTE : If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets toner into
fabric.
CAUTION : Do not touch the green underside of the toner
cartridge. Use the handle on the toner cartridge to avoid
touching this area.
5 Hold the toner cartridge by the handle and slowly insert
the toner cartridge into the opening in the machine.
6 Tabs on the sides of the toner cartridge and corresponding
grooves within the machine will guide the toner cartridge
into the correct position until it locks into place completely.
7 Close the front cover . Make sure that the cover is
securely closed.
NOTE : Do not dispose of used toner cartridge. Contact your
service representative.