Operation Manual

Getting Started
2.1
2 Getting Started
This chapter gives you step-by-step instructions for setting up
your machine.
This chapter includes:
•Unpacking
• Installing the Toner Cartridge
•Loading Paper
• Making Connections
• Turning the Machine On
• Installing Printer Software
• Changing the Country and Display Language
• Setting the Machine ID
• Setting the Date and Time
• Setting the Paper Size and Type
• Setting Sounds
• Using the Save Modes
• Setting the Dial Mode
Unpacking
1 Remove the machine and all accessories from the packing
carton. Make sure that the machine has been packed with
the following items:
Starter Toner Cartridge
AC Power Cord
*
*.The appearance of the power cord and the telephone line cord
may differ depending on your country’s specifications.
CD-ROM
**
**.The CD-ROM contains the printer drivers, Scan drivers,
Printer Settings Utility, and the User’s Guide.
Quick Install Guide
Telep h o n e L i ne Cord*
Paper Cover
***
***.The paper cover is to prevent dust and moisture from
contaminating your paper loaded in the tray. When you need
to open the machine (for example, cleaning inside of the
machine, removing the jammed paper or installing the toner
cartridge), remove the paper cover from your machine.
N OTES :
• Components may differ from country to country.
• You should use the telephone line cord which is supplied
with your machine. If you are replacing it with another
vendor’s, it should be AWG #26 or larger telephone line
cord.
• Power cord must be plugged into a grounded power
socket.