Copier User Manual
1
2
3
4
5
6
7
8
9
10
11
12
11
-3
Image Quality
Density Control
Manual adjustment (11 density steps) and automatic adjustment
Image Control
Hue, Saturation, Colour balance (YMCK adjustment), RGB adjustment, Sharpness,
Background adjustment and One-touch adjustment
Additional Functions Automatic paper selection, Automatic magnification selection, Inter-
rupt, Energy saving, Weekly timer, Help, Automatic energy saving,
Automatic shutoff, Mode memory, Date/Time setting, Auto job start,
(*4)Automatic duplexing, Thin paper/Thick paper/OHP cassette feed
ing, Language switching, User selection, Department management,
Automatic calibration, Dual-page, 2IN1/4IN1, (*4)Magazine sort, Edge
erasing, Image shift, Book centre erasing, Monocolour, Full image,
Mirror image, Negative/Positive reversal, X-Y zoom, Image repeat,
Centring, Trimming, Masking
Environmental Range Temperature: 10~30°C/50~86°F, Humidity: 20~85%RH (no dewing)
Power Requirements 220-240V, 50/60Hz, 9A
Power Consumption 2.0 kW max.
Dimensions 868mm(W) x 750mm(D) x 997mm(H)
Weight Approx. 187kg (not including developer and toner )
Space Occupied 1560mm(W) x 750mm(D) (with bypass guide and exit tray extended)
*1 Originals set on the glass, single-sided, 100%, text/photo mode, and paper fed from the first cassette
(auto colour, automatic copy density cleared).
*2 The reproduction ratio is computed automatically when both the original size and copy size are speci-
fied.
*3 Independent scaling (X-Y ZOOM) is also possible.
*4 The optional automatic duplexer is required to be installed.
*5 Advanced image enhancement might be optional depending on shipping places.
*The paper mentioned above is Toshiba-recommended paper. Specifications and appearance are subject to change
without notice in the interest of product improvement.