VORWORT Es wurden alle Anstrengungen unternommen, um sicherzustellen, dass die in dieser Veröffentlichung enthaltenen Informationen vollständig und richtig sind und dem aktuellsten Stand entsprechen. Der Hersteller übernimmt keinerlei Verantwortung für die Konsequenzen von Irrtümern außerhalb der Kontrolle des Unternehmens.
ERSTE HILFE IM NOTFALL Seien Sie beim Umgang mit dem Tonerpulver vorsichtig. Bei Verschlucken lassen Sie die Person kleine Mengen Wasser trinken und einen Arzt aufsuchen. Versuchen Sie NICHT, Erbrechen herbeizuführen. Wenn es eingeatmet wird, bringen Sie die Person an die frische Luft. Begeben Sie sich in ärztliche Behandlung. Sollte Tonerpulver in die Augen gelangen, spülen Sie es mindestens 15 Minuten mit viel Wasser aus. Schließen Sie die Augenlider nicht. Suchen Sie einen Arzt auf.
HAFTUNGSBEGRENZUNG Nachstehend finden Sie Hinweise zum Haftungsausschluss und zu Haftungsbeschränkungen der TOSHIBA TEC CORPORATION (auch für ihre Mitarbeiter, Erfüllungsgehilfen und Sublieferanten) gegenüber Käufern oder Benutzern ('Benutzer') des Systems e-STUDIO332P/382P, inklusive Zubehör, Optionen und Softwarepakete ('Produkt'). 1. Der Ausschluss und die Begrenzung der Haftung, die das Thema dieser Bestimmungen bilden, gelten in dem höchst möglichen, vom Gesetz zulässigen Rahmen.
durch die aufgrund der Verwendung des Produkts entstandene Unbenutzbarkeit (unter anderem auch Ausfall, Störung, Fehlfunktion, Absturz, Virusinfektion oder andere Probleme) von Hardware, Gütern oder Software entstehen, die TOSHIBA TEC CORPORATION weder direkt noch indirekt geliefert hat.
INHALT Vorwort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Erste Hilfe im Notfall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Import in die EU/autorisierter Vertreter . . . . . . . . . . . . . . . . . . . . . . . . .3 Informationen zur Umwelt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 ENERGY STAR® Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bedienung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Druckereinstellungen unter Windows . . . . . . . . . . . . Druckeinstellungen in Windows-Anwendungen . . . PCL-Emulation . . . . . . . . . . . . . . . . . . . . . . . . . PS-Emulation . . . . . . . . . . . . . . . . . . . . . . . . . . Einstellungen aus der Windows-Systemsteuerung . Druckereinstellungen in Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 . . . . . . . . . . . . . .42 . .
HINWEISE, ACHTUNG UND VORSICHT HINWEIS Ein Hinweis enthält zusätzliche Informationen, die den Haupttext ergänzen. ACHTUNG! „Achtung“ bietet weitere Informationen, die bei Nichtbeachtung zu Fehlfunktionen oder Geräteschäden führen können. VORSICHT! „Vorsicht“ bietet weitere Informationen, die bei Nichtbeachtung Risiken bergen oder zu Körperverletzung führen können. Dieses Modell arbeitet zum Schutz Ihres Produkts und zur Gewährleistung einer umfassenden Funktionsfähigkeit nur mit Original-Tonerpatronen.
EINFÜHRUNG Herzlichen Glückwunsch zum Kauf dieses leistungsfähigen Schwarzweißdruckers. Ihr neuer Drucker ist mit einer Vielzahl fortschrittlicher Funktionen ausgestattet, die scharfe Schwarzweiß-Seiten bei hoher Geschwindigkeit auf einer Reihe von Druckmedien drucken. Eine informative Zusammenfassung der Hauptfunktionen Ihres Druckers finden Sie weiter unten. DRUCKERFUNKTIONEN > Zwei unterschiedliche Modelle stehen zur Wahl: e-STUDIO332P und e-STUDIO382P > Speicher: 64 MB.
ZU DIESEM HANDBUCH Dieses Handbuch ist das Benutzerhandbuch Ihres Druckers und somit Bestandteil der folgenden Benutzerdokumentation: > Einrichtungshandbuch: dieses Handbuch beschreibt, wie Sie Ihren Drucker auspacken, anschließen und einschalten. > Broschüre zur Installationssicherheit: enthält Informationen zur sicheren Bedienung des Produkts. Dieses Dokument liegt dem Produkt als Ausdruck bei.
DRUCKEN VON SEITEN Sie können das gesamte Handbuch, einzelne Seiten oder Abschnitte drucken. So drucken Sie das Handbuch ganz oder auszugsweise: 1. Wählen Sie in der Symbolleiste Datei > Drucken (oder drücken Sie die Tastenkombination Strg + P ). 2. Wählen Sie die Seiten aus, die Sie drucken möchten: 3. (a) Alle Seiten, um das gesamte Handbuch zu drucken. (b) Aktuelle Seite, um die Seite aufzurufen, die Sie gerade anzeigen.
DRUCKERKOMPONENTEN Abgesehen von den Bedienfeldern, die im nächsten Kapitel beschrieben werden, unterscheiden sich die Drucker e-STUDIO332P, e-STUDIO382P äußerlich kaum. Die wichtigsten Komponenten werden in den Darstellungen unten ausgewiesen. Zur Veranschaulichung ist das Modell e-STUDIO382P abgebildet. 3 2 10 4 5 12 6 9 11 1 7 8 1. Bedienfeld 2. Ablagefach (150 Blatt, Druckseite unten) 3. Ablagefachverlängerung 4. Entriegelungstaste der oberen Abdeckung 5.
22 21 20 14 19 18 15 16 17 14. Lüfter 15. Speicherfeld (zum Upgrade des RAM-DIMM (Speicher) Ihres Druckers) 16. Netzkabelverbindung 17. Parallele Schnittstellenverbindung 18. LAN-Schnittstellenverbindung 19. USB-Schnittstellenverbindung 20. Papierfachverlängerung 21. Verlängerung des rückwärtigen Fachs für Druckseite oben 22.
BEDIENFELDER In diesem Kapitel werden die Funktionen des Druckerbedienfelds beschrieben. Es ist sinnvoll, an dieser Stelle auf das Configuration Tool einzugehen, da es dem STUDIO332P die mit dem Menü-Bedienfeld vergleichbare Funktionalität auf dem STUDIO382P bereitstellt. (Informationen über das Installieren des Configuration Tools finden Sie in „Druckertreiber“ auf Seite 41.) e-STUDIO332P BEDIENFELD Das Bedienfeld der Modelle e besteht aus zwei LED-Anzeigen und einem LCD (3) und einer Taste Online (4).
Die Blinkzeichen (x) der LED-Anzeigen geben Aufschluss über Folgendes: HINWEIS Die folgende Tabelle gilt auch für das Modell e-STUDIO382P. BLINKERTYP READY-LED (1) Blinkt x ATTENTION-LED (2) BEDEUTUNG Der Drucker empfängt und verarbeitet Daten während des Druckvorgangs, oder der Drucker wird zurückgesetzt. x x Es gibt einen Fehler beim Drucken (z. B. mit dem Papier), die Abdeckung ist geöffnet, oder das Papierfach ist leer, während ein Auftrag bearbeitet wird.
> Drucker zurücksetzen und Speicher löschen, nachdem der Druckvorgang abgebrochen wurde. HINWEIS Sie können den Drucker auf die Standardeinstellungen des Herstellers zurücksetzen, indem Sie die Taste Online gedrückt halten, während der Drucker mithilfe des Netzschalters eingeschaltet wird. Die LED-Anzeigen blinken, wenn der Drucker auf die Standardeinstellungen zurückgesetzt wurde. ÄNDERN DER SPRACHE Die Standardsprache, in der der Drucker Meldungen ausgibt und Berichte druckt, ist Englisch.
MENÜFUNKTIONEN Mit dem Configuration Tool können Sie die internen Druckereinstellungen anzeigen und ändern. Dies ist quasi die softwareseitige Entsprechung des LCD-Bedienfelds. Klicken Sie im Configuration Tool auf die Registerkarte Device Setting (Geräteeinstellung). Die Einstellungen sind in Kategorien oder „Benutzermenüs“ gruppiert, beispielsweise im Information menu (Informationsmenü) oder im Print Menu (Druck-Menü).
Drucken Dieses Menü ermöglicht die Einstellungen verschiedener Funktionen für Druckaufträge. MENÜPUNKT STANDARD KOPIEN 1 DUPLEX AUS MANUELL AUS PAPIERZUFUHR KASET1 AUTOM. SCHACHTW.
System-Konfigurationsmenü Dieses Menü dient für allgemeine Druckereinstellungen zur Anpassung an die bevorzugte Arbeitsweise. ELEMENT STANDARD STROMSPARZEIT 1 MIN. PERSONALITY (DRUCKERSPRACHE) AUTO EMULATION LÖSCHB. WARNUNG ONLINE AUTO CONTINUE (AUTOMAT. WEITER) EIN WARTEN MANUELL 60 SEK WARTEZEIT INJOB 40 SEK TIMEOUT LOCAL 40 SEK TIMEOUT NET 90 SEK TONERMANGEL WEITER P-STAU: WEITER? ON (EIN) FEHLERBERICHT OFF (AUS) PCL-Emulation Dieses Menü steuert die PCL-Emulation des Druckers.
PPR-Emulation Dieses Menü steuert die PPR-Emulation des Druckers. MENÜPUNKT STANDARD ZEICHENDICHTE 10 cpi KOMPRIMIERT 12CPI ZU 20CPI IBM-ZEICHENSATZ SET-2 ZEICHENSATZ IBM-437 BUCHSTABE O GESPERRT ZIFFER 0 NORMAL ZEILENABSTAND 6 LPI KEINE LEERSEITE AUS CR-FUNKTION CR LF-FUNKTION LF ZEILENLÄNGE 80 SPALTEN SEITENLÄNGE 11,7 ZOLL RAND OBEN 0,0 ZOLL RAND LINKS 0,0 ZOLL LETTER-FORMAT GESPERRT TEXTHÖHE GLEICH FX-Emulation Dieses Menü steuert die FX-Emulation des Druckers.
Menü Parallel Dieses Menü steuert den Betrieb der parallelen Datenschnittstelle des Druckers. MENÜPUNKT STANDARD PARALLEL FREIGEGEBEN BIDIREKTIONAL FREIGEGEBEN ECP FREIGEGEBEN ACK IMPULSDAUER SCHMAL ACK/BUSY TIMING (ACK/BUSY-EINSTELLUNG) ACK IN BUSY I-PRIME 3 MIKROSEK. USB-Menü Dieses Menü steuert den Betrieb der USB-Datenschnittstelle des Druckers.
ELEMENT STANDARD HUB LINK SETTING AUTO NEGOTIATE AB WERK EINSTLG. EXECUTE Wartungs-Menü Über dieses Menü sind verschiedene Funktionen für die Druckerwartung zugänglich. MENÜPUNKT STANDARD MENÜ RÜCKSETZEN EXECUTE SAVE MENU (MENÜ SPEICHERN) EXECUTE ENERGIE-SPARMODUS ENABLE (FREIGEGEBEN) FEUCHTE PAP.
DRUCKEN DER MENÜEINSTELLUNGEN So drucken Sie die Menüeinstellungen als Menüübersicht: Mit der Taste „Online“ 1. Drücken Sie die Bedienfeldtaste Online, um den Drucker offline zu schalten. 2. Drücken Sie die Taste Online, und halten Sie sie mindestens vier, aber weniger als sieben Sekunden gedrückt. 3. Der Drucker druckt eine Liste der Menüeinstellungen und eine Demodruckseite. Siehe „Taste Online“ auf Seite 15. Verwenden des Hilfsprogramms Configuration Tool 1.
e-STUDIO382P 1 2 3 4 5 6 7 8 BEDIENFELD Das Bedienfeld der Modelle e-STUDIO382P besteht aus einem menügesteuerten Bedienfeld, einem LCD-Display und zwei LED-Anzeigen. BEDIENFELDELEMENTE 1. Flüssigkristall-Display (LCD-Anzeige). Zwei Zeilen mit maximal 16 alphanumerischen Stellen zeigen den Druckstatus, Menüpunkte im Menümodus und Fehlermeldungen an. 2. Tasten zum Blättern im Menü. Drücken Sie diese Taste kurz, um in den MENÜModus zu wechseln.
Drücken Sie die Taste, um das Menü zu verlassen und ONLINE anzuzeigen, wenn der MENÜ-Modus aktiviert ist. HINWEIS Wenn die Taste Online im Menü-Modus gedrückt wird, kehrt der Drucker in den ONLINE-Zustand zurück. Auch wenn eine Fehlermeldung auf ein falsches Papierformat hinweist, wird der Drucker durch Drücken der Taste Online zum Drucken veranlasst. Wenn Papier manuell zugeführt wird, wird der Druckvorgang durch Drücken der Taste Online gestartet. 6. Taste Cancel (Abbrechen).
BEZEICHNUNG MAßNAHME PRINT PPR FONT (PPR SCHRIFTDRUCK) EXECUTE PRINT FX FONT (FX SCHRIFT DRUCK) EXECUTE PRINT ERROR LOG (FEHLERLISTE DRU.) EXECUTE USAGE REPORT (NUTZUNGSBERICHT) EXECUTE Menü Festplatte sichern Mithilfe dieses Menüs wird der Drucker heruntergefahren. BEZEICHNUNG MAßNAHME FESTPLATTE SICHERN START EXECUTE Drucken Dieses Menü ermöglicht die Einstellungen verschiedener Funktionen für Druckaufträge. MENÜPUNKT STANDARD KOPIEN 1 DUPLEX AUS PAPIERZUFUHR KASET1 AUTOM. SCHACHTW.
MENÜPUNKT STANDARD P-FORMAT EINZUG A4 MEHRZWECKFACH MEDIENTYP NORMAL P-GEWICHT EINZUG MITTEL MASSEINHEIT MILLIMETER X GRÖSSE 210 MILLIMETER Y GRÖSSE 297 MILLIMETER System-Konfigurationsmenü Dieses Menü dient für allgemeine Druckereinstellungen zur Anpassung an die bevorzugte Arbeitsweise. ELEMENT STANDARD STROMSPARZEIT 1 MIN PERSONALITY (DRUCKERSPRACHE) AUTO EMULATION PARA PS-PROTOKOLL ASCII NET PS-PROTOKOLL RAW USB PS-PROTOKOLL RAW LÖSCHB. WARNUNG ONLINE AUTO CONTINUE (AUTOMAT.
MENÜPUNKT STANDARD LF-FUNKTION LF DRUCKRÄNDER NORMAL LINIENST.-ANPASS EIN FACH-ID PCL KASS.0 ID 4 PCL KAS1 1 PCL KAS2 (Wenn Kassette 2 installiert ist) 5 PPR-Emulation Dieses Menü steuert die PPR-Emulation des Druckers.
MENÜPUNKT STANDARD KEINE LEERSEITE AUS CR-FUNKTION CR ZEILENLÄNGE 80 SPALTEN SEITENLÄNGE 11,7 ZOLL RAND OBEN 0,0 ZOLL RAND LINKS 0,0 ZOLL LETTER-FORMAT GESPERRT TEXTHÖHE GLEICH Menü Parallel Dieses Menü steuert den Betrieb der parallelen Datenschnittstelle des Druckers.
Menü Netzwerk Dieses Menü steuert den Betrieb der Netzwerkschnittstelle 10Base-T/100Base-TX des Druckers. ELEMENT STANDARD TCP/IP ENABLE (FREIGEGEBEN) IP VERSION (IP-VERSION) IP V4 NETBEUI DISABLE (GESPERRT) NETBIOS OVER TCP (NETBIOS ÜBER TCP) ENABLE (FREIGEGEBEN) NETWARE ENABLE (FREIGEGEBEN) ETHERTALK ENABLE (FREIGEGEBEN) FRAMETYPE AUTO (AUTOMATISCH) IP ADDRESS SET AUTO (AUTOMATISCH) IP ADDRESS xxx.xxx.xxx.xxx SUBNET MASK xxx.xxx.xxx.xxx GATEWAY ADDRESS xxx.xxx.xxx.
Betriebszähler-Menü Dieses Menü dient nur für Informationszwecke und enthält Angaben über die Nutzung des Druckers und die erwartete Nutzungsdauer seiner Verbrauchsmaterialien. Dies ist besonders praktisch, wenn Sie keinen vollständigen Satz von Verbrauchsmaterialien vorrätig haben und erfahren möchten, wie bald Sie sie benötigen. ELEMENT STANDARD ANMERKUNGEN TRAY1 PAGE COUNT (KASS. 1 SEITENZ.) nnnn Gibt an, wie viele Seiten über Kassette 1 gedruckt wurden. TRAY2 PAGE COUNT (KASS. 2 SEITENZ.
EMPFEHLUNGEN FÜR PAPIER Informationen darüber, welches Papier Sie in den Drucker einlegen können und welches Eingabefach und welche Auswurfmethode verwendet werden, finden Sie im Abschnitt „Papier- und Kassetteninformationen“ im Kapitel „Technische Daten“. HINWEIS Der Hinweis auf das Fach für den manuellen Einzug gilt für das Modell e-STUDIO332P und das Mehrzweckdach für das Modell e-STUDIO382P.
POSTKARTEN Der Hersteller dieses Druckers empfiehlt, bei der Auswahl von Postkarten für Ihren Drucker wie folgt vorzugehen: > Führen Sie Postkarten stets einzeln – je nach Druckermodell – über das Fach für den manuellen Einzug oder das Mehrzweckfach zu. > Verwenden Sie ausgebreitete doppelte Postkarten. > Verwenden Sie für Laserdrucker geeignete Postkarten. > Verwenden Sie keine für Tintenstrahldrucker vorgesehenen Postkarten. > Verwenden Sie keine gestempelten oder Bildpostkarten.
2. Stellen Sie hintere Papierhalterung (4) gemäß der Größe des Papiers ein, indem Sie die Nase fassen und die Halterung nach Bedarf nach vorne oder nach hinten drehen und schieben. 3. Stellen Sie die Papierführungen (5) ein, indem Sie die Nase fassen und entsprechend der Größe des verwendeten Papiers nach hinten oder vorne schieben. Es ist wichtig, dass die Papierführungen richtig eingestellt sind, so dass das Papier während des Druckvorgangs nicht abgeschrägt wird.
Automatische Einzugsreihenfolge Wenn keine optionalen Einzugsfächer installiert sind, wird die Funktion Autom. Schachtw. im Druck-Menü standardmäßig auf EIN und die Funktion (Schachtfolge) auf ABWÄRTS gesetzt. Wenn ein Fach kein Papier mehr enthält, wird das Papier automatisch in der folgenden Reihenfolge eingezogen: Fach 1, Fach 2 (wenn vorhanden), Mehrzweckfach oder Fach für den manuellen Einzug. Allerdings müssen diese Fächer für identisches Papier eingerichtet sein.
e-STUDIO332P: Legen Sie jeweils ein Blatt in das Fach für den manuellen Einzug. 6 e-STUDIO382P e-STUDIO332P > Für Einseitendruck auf Papier mit Briefkopf legen Sie das Papier mit dem Briefkopf nach oben und der vorderen Kante zum Drucker weisend ein. > Für Zweiseitendruck (Duplex) auf Papier mit Briefkopf legen Sie das Papier mit dem Briefkopf nach unten und der vorderen Kante vom Drucker weg weisend ein.
PAPIEREINZUG, -GRÖßE UND -EINSTELLUNG Zum Fixieren des Druckbilds auf dem Papier ist eine Kombination aus Druck und Wärme erforderlich. Bei zu großer Wärme werden leichtes Papier und Transparentfolien wellig. Bei zu geringer Wärme wird das Bild eventuell nicht vollständig auf schwerem Papier fixiert.
Auswahl der Papierzufuhr Papierzufuhr, Papiergröße, Papiergewicht und Papiersorte können manuell mithilfe des Druckerbedienfelds eingestellt werden. 1. Drücken Sie mehrere Male die Menü-Taste Pfeil OBEN oder Pfeil UNTEN, bis PRINT MENU (DRUCK-MENÜ) angezeigt wird, und danach OK (EINGABE). 2. Drücken Sie die Taste Pfeil OBEN oder Pfeil UNTEN, bis PAPER FEED (PAPIERZUFUHR) angezeigt wird, und danach OK (EINGABE). 3.
Papiersorte und Gewicht Legen Sie Papiersorte und Gewicht wie folgt fest: ACHTUNG! Wenn die Papiersorte oder das Papiergewicht nicht richtig eingestellt ist, wird die Papierqualität beeinträchtigt und die Fixierrolle kann beschädigt werden. 1. Drücken Sie die Menü-Taste Pfeil OBEN oder Pfeil UNTEN, bis MEDIA MENU (PAPIERSORTENMENÜ) angezeigt wird, und danach OK (EINGABE). 2.
SCHNITTSTELLEN Ihr Drucker ist mit mehreren Datenschnittstellen ausgestattet: 1. Parallel – Zur Direktverbindung mit einem PC. Für diesen Anschluss wird ein bidirektionales (mit IEEE 1284 konformes) Parallelkabel benötigt. 2. USB – Zur Verbindung mit einem PC, der unter Windows 2000 oder höher oder Mac OS X oder höher läuft. Dieser Anschluss setzt ein mit USB Version 2.0 oder höher kompatibles Kabel voraus.
DRUCKERTREIBER Dieses Kapitel beschreibt, wie Sie einen Druckertreiber unter zwei Betriebssystemtypen, und zwar Windows und Macintosh, installieren. Die Druckertreiber befinden sich auf der Druckertreiber-DVD. Die neusten Informationen über die Druckertreiberinstallation finden Sie in der Readme-Datei auf dieser DVD. WINDOWS-BETRIEBSSYSTEME 1. Unter Windows: Legen Sie die Druckertreiber-DVD in das DVD-ROM-Laufwerk ein. 2. Wenn die DVD nicht automatisch gestartet wird, wählen Sie „Start > Ausführen...
BEDIENUNG In diesem Kapitel erhalten Sie einen Überblick über den Betrieb Ihres Druckers in einer Windows- oder Macintosh-Umgebung. In der Windows-Umgebung ist die PCL-Emulation auf allen Druckermodellen verfügbar, während die PS-Emulation auf dem Modell e-STUDIO382P optional ist. DRUCKEREINSTELLUNGEN UNTER WINDOWS HINWEIS Die Abbildungen in diesem Handbuch beziehen sich auf Windows XP PCL und PS-Emulationen.
Registerkarte Einrichten 1. Die Papiergröße sollte mit der Papiergröße des Dokuments übereinstimmen (außer wenn Sie den Ausdruck auf eine andere Größe skalieren möchten). Diese Papiergröße muss im Drucker verfügbar sein. 2. Sie können die Papierquelle auswählen, aus der Papier eingezogen wird, z. B. Fach 1 (Standardpapierfach), Fach für den manuellen Einzug (e-STUDIO332P), Fach 2 (sofern das optionale zweite Papierfach installiert ist) oder Mehrzweckfach (e-STUDIO382P).
Registerkarte Auftragsoptionen 1. Die Ausgabeauflösung der gedruckten Seiten wird wie folgt eingestellt. > Die Einstellung „ProQ1200“ für e-STUDIO332P druckt mit 2.400 x 600 dpi. Sie belegt am meisten Druckerspeicher und dauert am längsten beim Drucken. Die gedruckten Seiten können zur Anpassung an größeres oder kleineres Papier skaliert werden. Diese Option empfiehlt sich zum Drucken von Fotos. > Die Einstellung „Hohe Qualität“ druckt mit 1.200 x 600 dpi für e-STUDIO332P und 1.200 x 1.
5. Sie können angeben, dass bis zu 999 Exemplare nacheinander gedruckt werden. Bei einem Druckauftrag dieser Länge müssen Sie jedoch zwischendurch Papier nachlegen. 6. Ihre gedruckten Seiten können in einem Bereich zwischen 25 % und 400 % der ursprünglichen Größe skaliert und an größeres oder kleineres Briefpapier angepasst werden. 7. Die Standardeinstellungen lassen sich mit einer Bildschirmschaltfläche wiederherstellen. Registerkarte „Bild“ 1.
PS-EMULATION Zur Verfügung stehen die Registerkarten Layout, Papier/Qualität und Auftragsoptionen. Registerkarte Layout My Printer Printing Preferences 1 2 3 4 5 1. Als Seiteneinrichtung kann entweder „Hochformat“ oder „Querformat“ oder „Querformat um 180 Grad gedreht“ eingestellt werden. 2. Der Zweiseitendruck (Duplex-Druck) kann auf lange Kante oder kurze Kante des Dokuments eingestellt werden. 3.
5. Klicken Sie auf die Schaltfläche Erweitert, um weitere Dokumentoptionen wie folgt einzustellen: My Printer Advanced Options 1 2 3 1. Wählen Sie die erforderliche Druckpapiergröße aus. 2. Sie können die TrueType-Schriftart durch eine andere ersetzen. 3. Sie können andere Dokumentoptionen nach Bedarf einstellen, z.B. PostScriptOptionen und Druckerfunktionen. Registerkarte Papier/Qualität Sie können die Papierquelle auswählen oder als automatische Auswahl belassen.
Registerkarte Auftragsoptionen 3 4 1 5 2 6 1. Die Ausgabeauflösung der gedruckten Seiten wird wie folgt eingestellt. > Die Einstellung „Hohe Qualität“ druckt mit 1.200 x 1.200 dpi für e-STUDIO382P und eignet sich am besten für Vektorobjekte wie Grafiken und Text. > Die Einstellung Normal druckt mit 600 x 600 dpi und eignet sich für die meisten Druckaufträge. Sie können die Option „Toner sparen“ wählen, um bei bestimmten Druckaufträgen Toner zu sparen. 2.
EINSTELLUNGEN AUS DER WINDOWS-SYSTEMSTEUERUNG Wenn Sie das Fenster Eigenschaften des Druckertreibers direkt aus Windows und nicht aus einer Anwendung öffnen, stehen mehr Einstellungen zur Verfügung. Hier vorgenommene Änderungen betreffen normalerweise alle Dokumente, die mit Windows-Anwendungen gedruckt werden, und bleiben permanent unter Windows gültig. PCL-Emulation Die Hauptregisterkarten sind Allgemein, Erweitert und Geräteoptionen. Registerkarte „Allgemein“ 1 2 3 1.
Registerkarte „Erweitert“ My Printer Properties 1 2 3 4 5 6 7 8 10 9 1. Sie können vorgeben, zu welchen Zeiten am Tag der Drucker verfügbar sein soll. 2. Mit dieser Option wird die jeweilige Priorität von 1 (niedrigste) bis 99 (höchste) vorgegeben. Dokumente mit höchster Priorität werden zuerst gedruckt. 3. Diese Option gibt vor, dass Dokumente vor dem Drucken in einer besonderen Druckdatei gespeichert werden.
7. Diese Option legt fest, dass der Spooler die Dokumente nach der Fertigstellung nicht löscht. Dann können diese Dokumente erneut vom Spooler aus zum Drucker übertragen werden, anstatt erneut aus der Anwendung heraus gedruckt zu werden. Bei häufigem Einsatz dieser Option wird die Festplattenkapazität des Computers stark beansprucht. 8. Diese Einstellung legt fest, ob erweiterte Funktionen, z. B. Seiten pro Blatt, je nach Drucker verfügbar sind. Für normales Drucken sollte diese Option aktiviert sein.
PS-Emulation Die Hauptregisterkarten sind Allgemein, Erweitert und Geräteeinstellungen. Die Registerkarten Allgemein und Erweitert und die entsprechenden Registerkarten der PCLEmulation sind identisch (s.o.). Registerkarte Geräteeinstellungen 1 2 3 1. Sie können die gewünschten Papiergrößen in den verfügbaren Papiereinzugsfächern festlegen. 2. Sie können je nach Anwendung eine Vielzahl von Schriftarteinstellungen vornehmen. 3.
BEIDSEITIGES DRUCKEN Die Duplexeinheit ermöglicht beidseitiges Drucken, wodurch weniger Papier verbraucht und der Umgang mit umfangreichen Dokumenten vereinfacht wird. Außerdem ermöglicht sie den Broschürendruck, bei dem noch weniger Papier verbraucht wird. Sie können mit der Funktion „Auto Duplex (Automatischer Duplexdruck)“ oder mit der Funktion „Manual Duplex (Manueller Duplexdruck)“ drucken. HINWEIS Die Schritte des Prozesses beziehen sich auf Windows XP PCL.
4. Wählen Sie im Dropdownmenü „Duplex-Druck“ je nach Druckereinstellungen entweder Lange Seite (Manuell) oder Kurze Seite (Manuell). Wenn Sie weitere Informationen benötigen, klicken Sie auf Duplex-Hilfe. Klicken Sie auf die Schaltfläche Drucken. 5. Zuerst wird jede zweite Seite (1) des Dokuments gedruckt. Ist dieser Vorgang beendet, werden Sie in einer Bildschirmmeldung aufgefordert, das bedruckte Papier zu entnehmen, umzudrehen und wieder in das Papierfach einzulegen. 1 3 2 6.
7. Nehmen Sie das bedruckte Papier aus dem Ausgabefach (3), und legen Sie es so in das Papierfach, dass die bedruckte Seite oben liegt und der untere Seitenrand zum Drucker (4) zeigt. 4 5 8. Schließen Sie das Papierfach, und drücken Sie die Taste Online (5). Die Meldung wird ausgeblendet, und die restlichen Seiten des Dokuments werden gedruckt. HINWEIS Sie müssen die Taste Online drücken, um den Druck für die andere Seite zu starten. Die Standardeinstellung der Zeit ist eine Minute.
7. Nachdem jede zweite Seite gedruckt wurde, nehmen Sie das Papier aus dem Ausgabefach. 8. Legen Sie nun ein Blatt nach dem anderen so in das Fach für manuellen Einzug, dass die bedruckte Seite unten liegt und der obere Seitenrand zum Drucker zeigt. Achten Sie darauf, dass jedes Blatt richtig eingezogen wird. 9. Drücken Sie die Taste Online. Die verbleibenden Seiten des Dokuments werden nacheinander auf die jeweils leere Seite des Papiers gedruckt, das Sie in das Fach für manuellen Einzug einlegen.
OVERLAYS UND MAKROS (NUR WINDOWS) WAS SIND OVERLAYS UND MAKROS? Wenn Sie auf besonderes Papier wie Formulare und Briefpapier drucken, aber kein vorgefertigtes Papier verwenden möchten, können Sie mit diesen Funktionen solches Papier erstellen. Sie können PostScript-Overlays einsetzen, um besondere Druckvorlagen zu erstellen und für sofortigen Einsatz im Drucker zu speichern. Wenn Sie den PCL-Treiber installiert haben, sind entsprechende Funktionen mit Makros möglich.
6. Wählen Sie auf der Registerkarte Overlay die Option Formular erstellen aus der Dropdownliste (4). 7. Klicken Sie auf OK, um das Fenster DokumentEigenschaften zu schließen. 8. Klicken Sie auf OK, um das Dialogfeld Drucken zu schließen. 9. Wenn Sie zur Eingabe eines Namens für die Druckdatei aufgefordert werden, geben Sie einen sinnvollen Namen mit der Erweiterung .PRN ein. 10. Schließen Sie die Anwendung. 4 DAS PROJEKT ERSTELLEN UND ÜBERTRAGEN 1.
DAS OVERLAY DRUCKEN 1. Klicken Sie auf das Symbol des Druckers, und wählen Sie Drucker > Formular testen. 2. Wählen Sie die einzelnen Overlays, die Sie prüfen möchten, im Fenster Test PostScript Form (PostScript-Formular testen), und klicken Sie auf OK. Nach einer kurzen Zeitdauer, in der der Drucker das Formular verarbeitet, erfolgt der Ausdruck. 3. Klicken Sie nach dem Prüfen der einzelnen Overlays auf Beenden. 4.
MIT POSTSCRIPT-OVERLAYS DRUCKEN Nachdem Sie die Overlays erstellt haben, können Sie sie nach Wunsch in Dokumenten verwenden. Im nachstehenden Beispiel werden zwei Overlays für Geschäftsbriefe verwendet. Das erste wird nur auf der ersten Seite und das zweite auf allen folgenden Seiten gedruckt. 1. Erstellen Sie das Dokument ganz normal in einer Anwendung. Formatieren Sie das Dokument nach Erfordernis, so dass es in den verfügbaren Platz passt. 2.
OVERLAY-BILD ERSTELLEN 1. Erstellen Sie das gewünschte Bild in einer dafür geeigneten Anwendung, beispielsweise in einem Grafikprogramm. 2. Öffnen Sie das Dialogfeld Drucken der Anwendung. 3. Als Druckername (1) muss der PCL-Druckertreiber gewählt sein. 4. Wählen Sie dann die Option In Datei drucken (2). 5. Wenn Sie zur Eingabe eines Namens für die Druckdatei aufgefordert werden, geben Sie einen sinnvollen Namen mit der Erweiterung .PRN ein. 6. Schließen Sie die Anwendung.
DAS MAKRO ZUR PROBE DRUCKEN 1. Wählen Sie Drucker > Makro testen. 2. Geben Sie im Fenster „Makro testen“ die ID-Nummer ein, und klicken Sie auf OK. Nach einer kurzen Zeitdauer druckt der Drucker das Makro. 3. Klicken Sie nach dem Prüfen der einzelnen Makros auf Beenden. 4. Klicken Sie auf die Standardschaltfläche Schließen (X) von Windows, oder wählen Sie Projekte > Beenden, um den Storage Device Manager zu beenden.
MIT PCL-OVERLAYS DRUCKEN Nachdem Sie die Overlays erstellt haben, können Sie sie nach Wunsch in Dokumenten verwenden. Im nachstehenden Beispiel werden zwei Overlays für Geschäftsbriefe verwendet. Das erste wird nur auf der ersten Seite und das zweite auf allen folgenden Seiten gedruckt. 1. Erstellen Sie das Dokument ganz normal in einer Anwendung. Formatieren Sie das Dokument nach Erfordernis, so dass es in den verfügbaren Platz des BriefkopfOverlays passt. 2.
VERBRAUCHSMATERIAL UND WARTUNG In diesem Abschnitt wird beschrieben, wie Sie die Tonerpatrone und Bildtrommel austauschen und allgemeine Wartungsaufgaben erledigen. ZEITPUNKT DES AUSTAUSCHS DER TONERPATRONE Wenn der Toner ausgeht, wird auf dem Bedienfeld-LC-Display TON.MANG angezeigt. Nachdem der niedrige Tonerstand angezeigt wurde, druckt der Drucker ca. 100 weitere Seiten, zeigt dann an, dass der Toner leer ist und hört auf zu drucken.
2. Drücken Sie die Entriegelungstaste der oberen Abdeckung, und öffnen Sie die obere Abdeckung des Druckers vollständig. HINWEIS Das Modell e-STUDIO382P ist unten dargestellt. Das Prinzip ist bei allen Modellen dieses Druckers gleich. 3. Ziehen Sie den farbigen Hebel (1) auf der rechten Seite der Tonerpatrone zur Vorderseite des Druckers (Position Entriegelt), um die Patrone zu schließen und danach die verbrauchte Tonerpatrone (2) zu entfernen. 2 1 4.
10. Setzen Sie die linke Seite der Tonerpatrone zuerst in die Oberseite der Bildtrommel (5) ein, drücken Sie sie gegen die Stifte an der Bildtrommel, und senken Sie dann die rechte Seite der Tonerpatrone auf die Bildtrommel. 5 11. Drücken Sie vorsichtig auf die Tonerpatrone, um sich zu vergewissern, dass sie einwandfrei sitzt, und drücken Sie den farbigen Hebel (6) (Position Verriegelt) zur Drucker-Rückseite. Dadurch wird die Tonerkartusche verriegelt, und Toner kann in die Bildtrommel gelangen. 6 12.
13. Schließen Sie die obere Abdeckung, und drücken Sie sie nach unten, um sie zu verriegeln. ZEITPUNKT DES AUSTAUSCHS DER BILDTROMMEL Wenn die Trommel 90 % ihrer Lebensdauer erreicht hat, wird die Meldung REPLACE IMAGE DRUM (BILDTROMMEL ERSETZEN) auf dem LCD-Display des Bedienfelds angezeigt. Tauschen Sie die Bildtrommel aus, wenn der Drucker blass druckt oder die Qualität sich verschlechtert. AUSTAUSCHEN DER BILDTROMMEL. VORSICHT > Setzen Sie die Bildtrommel niemals einer offenen Flamme aus.
3. Stellen Sie die beiden Teile vorsichtig auf ein Blatt Papier, um Verschmutzungen durch den Toner und eine Beschädigung der grünen Fläche der Trommel zu vermeiden. ACHTUNG! Die grüne Bildtrommelfläche an der Unterseite der ID-Einheit ist sehr empfindlich gegen Berührung und Licht. Berühren Sie diese Fläche nicht und setzen Sie sie niemals länger als fünf Minuten der normalen Raumbeleuchtung aus.
9. Halten Sie die Bildtrommeleinheit oben in der Mitte, und senken Sie sie so in den Drucker ab, dass die Zapfen (1 und 2) an beiden Enden in den Schlitzen an den Seiten des Drucker-Innenraums (3) sitzen. 1 2 3 10. Wischen Sie den LED-Zeilenoberfläche vorsichtig mit einem weichen Tuch ab. 11. Schließen Sie die obere Abdeckung, und drücken Sie sie nach unten, um sie zu verriegeln.
FEHLERBEHEBUNG STATUS- UND FEHLERMELDUNGEN Ihr Drucker kann Ihnen nützliches Feedback während des normalen Betriebs, aber auch bei Druckproblemen liefern, so dass Sie die geeigneten Gegenmaßnahmen ergreifen können. Die LCD auf dem Drucker-Bedienfeld bietet die selbsterklärenden Status- und Fehlermeldungen in Ihrer gewählten Sprache. Die Fehlermeldungen werden von einer ausgehenden Ready-LED begleitet.
EINZUGS-PAPIERSTAU HINWEIS Das Modell e-STUDIO382P ist unten dargestellt. Das Prinzip ist bei allen Modellen dieses Druckers gleich. 1. Entnehmen Sie die Papierkassette aus dem Drucker (1). 2. Entfernen Sie zerknittertes oder geknicktes Papier. 3. Entfernen Sie Papier von der Unterseite des Druckers (2). 2 1 4. Setzen Sie das Papierfach wieder ein. Nachdem Sie das beschädigte oder falsch eingezogene Papier entfernt haben, müsste der Drucker weiter drucken.
3. Heben Sie die Bildtrommel vorsichtig mit der Tonerpatrone heraus. Achten Sie darauf, dass Sie die grüne Trommeloberfläche weder berühren noch zerkratzen. 4. Entfernen Sie alle gestauten Blätter aus dem Papierweg. 5. Setzen Sie die Bildtrommel wieder mit der Tonerpatrone ein. Achten Sie darauf, dass die Zapfen (1 und 2) richtig in die Schlitze auf beiden Seiten des Druckers (3) eingesetzt sind. 1 2 3 6. Klappen Sie die obere Abdeckung zu, aber drücken Sie sie noch nicht zum Verriegeln nach unten.
7. Entfernen Sie alle gestauten Blätter aus dem Ausgabefach für Druckseite unten. HINWEIS Wenn die Seite des gestauten Papiers hervorragt und von der Ausgabe aus gesehen werden kann, setzen Sie die Bildtrommel wieder ein, schließen Sie die obere Abdeckung, und schalten Sie den Drucker ein. Entfernen Sie das gestaute Papier aus der Ausgabe, wenn die Ausgaberolle ein paar Sekunden nach dem Einschalten anfängt, sich zu drehen.
10. Überprüfen Sie, ob in der Duplex-Einheit ein Papierstau aufgetreten ist. > Nehmen Sie die Bildtrommel wie in Schritt 3. beschrieben heraus. Nehmen Sie dann die Duplexeinheit (1) heraus, indem Sie die farbigen Hebel (2) auf jeder Seite anheben und danach die Hebel anpacken und die Einheit behutsam herausheben. 2 1 2 > Entfernen Sie das Papier und setzen Sie die Duplex-Einheit wieder ein. > Setzen Sie die Bildtrommel wieder ein. Siehe Schritt 5. 11.
> Heben Sie den Papierfang (1) an, und entfernen Sie das Papier. Lassen Sie den Papierfang wieder in die ursprüngliche Position herunter. 1 2 > Setzen Sie die Bildtrommel wieder ein. Siehe Schritt 5. 12. Öffnen Sie das Mehrzweckfach (1) (Fach für den manuellen Einzug beim e-STUDIO332P). > Entfernen Sie Papier, das Sie vorfinden (2), und schließen Sie das Fach. 1 2 13. Schließen Sie die obere Abdeckung, und drücken Sie sie nach unten, um sie zu verriegeln. 14.
PROBLEME MIT DER DRUCKQUALITÄT Bevor Sie einen Kundendienstmitarbeiter wegen eines Problems im Zusammenhang mit der Druckqualität kontaktieren, sehen Sie sich die Lösungsvorschläge in der unten stehenden Tabelle, und prüfen Sie, ob Sie vielleicht etwas übersehen haben. SYMPTOM PROBLEM LÖSUNG Es werden leere Blätter gedruckt. Die Bildtrommelpatrone ist nicht richtig installiert. Installieren Sie die Bildtrommelpatrone neu. Leere oder fehlende Tonerpatrone. Setzen Sie eine neue Tonerpatrone ein.
SYMPTOM PROBLEM LÖSUNG Der Ausdruck ist hell/unscharf. Ist der Tonerstand niedrig? Tauschen Sie die Tonerpatrone aus. Ist das Papier für Laserdrucker ausgelegt? Verwenden Sie empfohlenes Papier. Die LED-Zeile ist verschmutzt. Reinigen Sie die LED-Zeile. Zeichen in Fettdruck und dunkle Linien sind verschmiert. Der Tonerstand ist niedrig. Setzen Sie eine neue Tonerpatrone ein. Der Ausdruck ist dunkler als sonst. Zu hohe Dunkelheitseinstellung. Ändern Sie die Dunkelheitseinstellung.
SYMPTOM PROBLEM LÖSUNG Papierstaus treten häufig auf. Mehrere Blatt Papier werden gleichzeitig zugeführt. Postkarten, Umschläge, Etikettenbögen oder Folien sind in das Papierfach eingelegt. Sie können nicht mit dem Papierfach drucken. Legen Sie Postkarten, Umschläge, Etikettenbögen oder Folien in das Fach für den manuellen Einzug oder das Mehrzweckfach ein. Postkarten oder Umschläge wurden falsch ausgerichtet eingelegt. Prüfen und legen Sie die Medien in die richtige Richtung ein.
HARDWAREPROBLEME SYMPTOM PROBLEM LÖSUNG Ein Teil eines Grafikbilds wird auf einer, der andere auf einer zweiten Seite gedruckt. Unzureichender Druckerspeicher für dieses Bild bei dieser Auflösung. Ändern Sie die Auflösung, verringern Sie die Bildgröße, oder erweitern Sie den Druckerspeicher. Wenn Sie drucken wollen, aber nicht können, der Drucker jedoch angibt, dass er zum Datenempfang bereit ist. Konfigurationsfehler. Prüfen Sie die Kabelverbindung.
INSTALLIEREN VON OPTIONEN Die folgenden Optionen sind verfügbar, wenn Sie die Leistung Ihres Druckers verbessern möchten: > 64, 256 MB-RAM-DIMM: Zum Erweitern des Hauptspeichers Ihres Druckers und Beschleunigen der Verarbeitung großer Dateien > Zweites Papierfach: Erhöht die Papierverarbeitungskapazität des Druckers um 530 Blatt (80 g/m²). INSTALLATION Um eine der o.g. Optionen zu installieren, folgen Sie den ausführlichen Installationsanleitungen, die zu ihrem Lieferumfang gehören.
TECHNISCHE DATEN ALLGEMEINES DRUCKERMODELL MODELLNUMMER e-STUDIO332P DP-3320P e-STUDIO382P DP-3820P Eine Zusammenfassung der grundlegenden Eigenschaften Ihres Druckers finden Sie in der Tabelle weiter unten: BEZEICHNUNG SPEZIFIKATION Abmessungen 387 mm x 364 mm x 244,5 mm (B x T x H) Gewicht ca.
PAPIER- UND FACHINFORMATIONEN Einzugs- und Auswurfmethoden richten sich nach der Sorte, der Größe und der Stärke des verwendeten Papiers. Das Diagramm mit Hinweisen/Symbolen/Begriffen auf der folgenden Seite bietet grundlegende Informationen. (Geringfügige Abweichungen von Einstellungen können je nach Benutzer-Setup und Umgebungsbedingen erforderlich sein.
Einzugsfach Auswurfmethode Papiersorte Größe Gewicht T1 T2 MPT MF FU FD Etiketten A4 - X X 0 0 0 X - X X 0 0 0 X Letter Transparentfolien A4 Letter Duplexdruck Auto Manuell Papiersorte Größe Gewicht T1 T2 MPT MF T1 T2 MPT MF Normalpapier A4 L, ML, M, MH, H 0 0 0 X 0 0 0 0 16K (184 – 260 mm) L, ML, M, 16K (195 – 270 mm) MH, H 0 0 0 x 0 0 0 0 L, ML, M, MH, H X X X X 0 X 0 0 L, ML, M, MH, H X X X X U U 0 0 UH X X X X X X X
Duplexdruck Auto Manuell Papiersorte Größe Gewicht T1 T2 MPT MF T1 T2 MPT MF Briefumschläge Com-9 - X X X X X X X X - X X X X X X X X - X X X X X X X X Com-10 DL C5 C6 Monarch Benutzerdefiniert B: 86 – 216 L: 140 – 356 Etiketten A4 Letter Transparent folien A4 Letter HINWEISE/SYMBOLE/BEGRIFFE Hinweise: 1. Wenn ein optionales zweites Papierfach verwendet wird, wird das Originalfach als Fach 1 und das optionale Fach als Fach 2 bezeichnet. 2.
SYMBOL/ BEGRIFF BEDEUTUNG FU Druckt mit der Druckseite nach oben von der Rückseite des Druckers FD Druckt mit der Druckseite nach unten von der Oberseite des Druckers B, L Breite, Länge in mm L Leichtes Papiergewicht: 60 - 66 g/m2 ML Mittelleichtes Papiergewicht: 64 - 73 g/m2 M Mittelleichtes Papiergewicht: 74 - 88g/m2 MH Mittelschweres Papiergewicht: 89 - 104 g/m2 H Schweres Papiergewicht: 105 - 122 g/m2 UH Sehr schweres Papiergewicht: 123 g/m2 - 160 g/m2 o Kann verwendet werden x Ka
INDEX A I P Attention-LED........................ 14 Auflösung Einstellung unter Windows ....................44, 48 Ausgabe-Papierstau .............. 71 Automatischer Duplexdruck ........................ 53 Installieren Papier ............................... 33 Installieren des Configuration Tools ................................... 41 Installieren von Treibern Macintosh ......................... 41 Windows ........................... 41 Installierte Optionen Macintosh .........................
Wasserzeichen Drucken unter Windows ....................
07113004 iss.