Owner manual

English

English - 11 -

Controlling the TV

A wide variety of external equipment can be connected via the sockets located on the side and back of the television.

Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the

left side of the television may be used for some functions.

Remote Control Sensor

Standby LED

Switching on

Make sure that the mains plug is connected to the power

and the standby LED lights up in red. Press the button on

the left side of the television to switch the television on and

the standby LED turns green.

To put the television into Standby, press

on the remote

control. To view the television, press again. The picture

may take a while to appear.

For energy saving:

Turning the television into standby at its mains supply,

or un-plugging it, will cut energy use to nearly zero for all

televisions. This is recommended when the television is not

being used for a long time, e.g. when on holiday.

Reducing the brightness of the screen will reduce energy

use.

Energy efﬁ ciency cuts energy consumption and thus saves

money by reducing electricity bills.

Note: Putting the television into standby mode, will reduce

energy consumption, but will still draw some power.

Using the Controls and Connections on the TV

Using the control buttons on the side of the TV:

• To alter the volume, press + or -. If the volume does not

change, press P/V-AV once and press + or - again.

• To alter the programme position, press + or -. If the

programme does not change, press P/V-AV once and

press + or - again.

• To select an external input, press and hold the P/V-AV

button until the “Input Source” list is displayed. To select

an external input, press P/V-AV repeatedly until the

appropriate input source is selected.

Please always refer to the owner’s manual of the

equipment to be connected for full details.

Please note: Inserting the headphone plug will mute the

sound from all speakers.

Timer LED

Standby / On button

Programme / Volume / AV Function

+/- control/volume buttons