Use and Care Manual

OPERATION
Press Favorite to program and choose up to three cooking procedures.Each
procedure will be indicated by 1, 2 or 3 in the display.
Press Favorite until your desired procedure number appears in the display.
Press to begin it. A maximum of two cooking stages can be set for each
procedure.
To program a procedure, follow the steps listed below. Example: Cook food at
80% Power Level for 3 minutes and 20 seconds; save as memory 2.
10. MEMORY FUNCTION
(1)
(2)
(3)
Press Favorite twice; screen displays 2.
Press Cook Time , then press "3" , "2" and "0" in order.
Press Power once, then press "8" for "PL 8" to display.
Press to save the procedure. Oven beeps once.
Or press twice directly to save and start cooking.
To choose the procedure from the memory list, press Favorite twice.
Screen will display "2". Press to run procedure.
a.
b.
c.
d.
e.
NOTE:
Auto Menu cannot be set in Memory function.
At most 2 stages can be set for cooking. If one stage is Defrost, it will automatically
set to be the first stage.
11.Muti-Stage Cooking
EXAMPLE: 80% Power Level for 5 minutes followed by 60% Power Level for 10
minutes; saved as memory 3.
NOTE: Auto Menu cannot be set in Multi-stage Cooking.
Press Favorite 3 times, screen displays 3.
Press Cook Time, then press "5" , "0" and "0" to set first stage cook time.
Press Power once, then press "8" to choose 80% first stage cooking
power.
Press Cook Time again, then press "1", "0", "0" and "0" to set second stage
a.
b.
c.
d.
cook time.
EN-23