Manual

Hardware for the Equium 8100D
3-2 Equium 8100D/M
Equium 8100D/M – 03CHAP.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK
3. Disconnect all cables from the computer.
Failure to disconnect power, telecommunications links, networks, or
modems before you open the case or start any procedure can result in
personal injury or damage to equipment. Some circuitry on the
motherboard may continue to operate even though the power is off.
Removing the case panels
In the following instructions, the directions “left” and “right” assume you
are facing the back of the system unit.
1. Remove the three thumb screws that secure the two case panels to
the rear of the cabinet.
Removing the thumb screw
2. Pull the right panel to the right about an inch, then lift it up and off the
machine.
Removing the right panel
3. Pull the left panel to the left about an inch, then lift it up and off the
machine.