Manual

Hardware for the Equium 8100D
3-6 Equium 8100D/M
Equium 8100D/M – 03CHAP.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK
Adding a new device
1. Shut down the computer and unplug the power cable.
2. Remove the case panels and, if necessary, the front bezel. See
Opening the case.
3. Install a device to the expansion bay.
When you will install the drives into the internal expansion bays, carry
out the following procedures.
■
Put the shoulder screw on the part of drive where an arrow sign is
indicated.
Locating the shoulder screw
■
Insert the drive into the Internal expansion bay.
■ Fix the drive with two mounting screws.
Mounting screws