Manual

Hardware for the Equium 8100D
3-12 Equium 8100D/M
Equium 8100D/M – 03CHAP.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK
Adding memory
Toshiba Equium 8100D/M computers are shipped with:
■ 133 MHz Synchronous DRAM (SDRAM).
The main memory bank contains three 168-pin DIMM (dual inline
memory module) sockets- DIMM 1, DIMM 2, and DIMM 3. The
Toshiba Equium 8100D/M supports system memory from 128 MB to
1.5 GB. The memory modules available are 128 MB, 256 MB and
512 MB of SDRAM.
The memory controller supports 64-bit wide DIMMs without ECC/EC.
The controller uses the JEDEC standard serial presence detect
mechanism to detect memory and array configuration. No jumper
settings are required for the memory size or type; memory is
automatically detected by the system BIOS.
Memory configurations
You can fill the DIMM sockets in any order.
The following table shows the memory configurations available on the
Toshiba Equium 8100D/M computer.
Total RAM (MB)
DIMM sockets
DIMM 1 DIMM 2 DIMM 3
128 128 - -
256 128 128 -
384 128 128 128
384 128 256
640 128 256 256
640 128 512 -
1152 128 512 512
256 256 - -
512 256 256 -
768 256 256 256
768 256 512 -
1280 256 512 512