Manual

Hardware for the Equium 8100D

User's Manual 3-13

Version

Last Saved on 14/sep/01 5:29

Equium 8100D/M – 03CHAP.doc – ENGLISH – Printed on 23/sep/01 as 03_800UK

512 512 - -

1024 512 512 -

1536 512 512 512

Installing a DIMM

The following procedure assumes you have opened the case and are

observing ESD precautions. (See Opening the case.)

1. Holding the DIMM only by the edges, remove it from its antistatic

package.

2. Make sure the retaining clips at either end of the socket are pushed

away from the socket.

3. Position the DIMM above the socket at about a 90-degree angle

relative to the motherboard.

Make sure the two small notches in the bottom edge of the DIMM

align with the keys in the socket.

4. Insert the bottom edge of the DIMM into the socket and make sure it

is seated correctly.

Inserting a DIMM

5. Gently push the top edge of the DIMM until the retaining clips at each

end of the socket snap into place.