Manual

AC Power Cord and Connectors
User's Manual C-1
Version
1
Last Saved on 23/sep/01 1:13
Equium 8100D/M – C-APEND.doc – ENGLISH – Printed on 23/sep/01 as AC_800UK
Appendix C
AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country in which it is used. All cords must meet the following
specifications:
IEC60950
A certified power supply cord has to be used with this equipment.
The relevant national installation and/or equipment regulations should be
considered. (For a rated current up to 6A)
A certified power supply cord not narrower than ordinary polyvinyl
chloride flexible cord according to IEC 60227(designation H05VV-F 3G
0.75mm2 or H05VVH2-F2 3G 0.75mm2) shall be used. Alternative a
flexible cord be of synthetic rubber according to IEC 60245 (designation
H05VV-F 3G 0.75mm2) shall be used.
Wire size: Minimum 0.75mm2
Current rating:
Minimum 10.0 amperes
Voltage rating: 125 or 250 VAC (depending country power
standards)
Equium 8100D/M
User's Manual C-1