Manual

User’s Manual 8-6
Optional Devices
Removing a SD/MS/MS Pro/MMC/xD card
To remove the memory card, follow the steps below.
1. In Windows
®
XP, open the Safely Remove Hardware icon on the
system tray and disable the inserted memory card.
2. Gently press the memory card inside the socket to eject it.
3. Grasp the card and remove it.
Removing the inserted memory card
Memory expansion
You can install additional memory in the computer’s memory module to
increase the amount of RAM.
SD/MS/MS Pro/MMC/xD
card
■ Make sure the Multiple Digital Media Card Slot indicator is out before
you remove the card or turn off the computer’s power. If you remove
the card or turn off the power while the computer is accessing the card
you may lose data or damage the card.
■ Please do not remove the inserted memory card from the Multiple
Digital Media Card Slot while in Standby or in Hibernation state. If you
do, PC may become unstable or the data in the memory card may be
lost.
■ Do not turn off or make computer in Standby or Hibernation mode
during data is being transferred. The computer could become unstable
or data would be lost.
Only memory modules with the following parts numbers can be installed:
256 MB: PA3389U-1M25
512 MB: PA3412U-1M51
1GB: PA3411U-1M1G