Owner's manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- Chapter 1 - Features, Utilities and Options
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Using the TouchPad/Dual Mode Pad
- Dual Mode Pad Button function (Dual Mode Pad is provided with some models)
- Using the Web Camera (depending on the model purchased)
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs/DVDs on a DVD Super Multi drive or HD DVD-ROM drive supporting double layer disc recording
- Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
- Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- TV-Out & HDMI
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-Up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Modes
- Appendix C - AC Power Cord and Connectors
- Appendix D - If your computer is stolen
- Glossary
6-14 User’s Manual
A210
3. Press Enter.
Power-up modes
The computer has three power-up modes:
■ Hibernation (saves data in memory to the hard disk)
■ Sleep (power remains on, maintaining the data in memory, but the CPU
and all other devices effectively enter a “sleep” mode)
■ Boot (does not save data in memory)
Panel power off/on
This feature makes the computer to enter Hibernation when the display
panel is closed and turns it back on when the display panel is opened.
System automatic Sleep/Hibernation
This feature automatically turns off the system in Sleep or Hibernation
mode if the computer is not used for a set duration.
Refer to Special features, in Chapter 1, Features, Utilities and Options for
an explanation of how to set the duration.
If you enter the password incorrectly three consecutive times, the
computer shuts down. You must turn on the computer again and re-enter
the password.
Refer also to the section Turning off the power in Chapter 3, Getting
Started.
If the panel power off function is enabled and you use Shut down
Windows, do not close the display until the shut down function is
completed.