Owner's manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- Chapter 1 - Features, Utilities and Options
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Using the TouchPad/Dual Mode Pad
- Dual Mode Pad Button function (Dual Mode Pad is provided with some models)
- Using the Web Camera (depending on the model purchased)
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs/DVDs on a DVD Super Multi drive or HD DVD-ROM drive supporting double layer disc recording
- Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
- Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- TV-Out & HDMI
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-Up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Modes
- Appendix C - AC Power Cord and Connectors
- Appendix D - If your computer is stolen
- Glossary
User’s Manual 8-11
A210
HDMI
A HDMI monitor can be connected to the HDMI out put on the computer.
To connect monitor, follow the steps as detailed below:
1. Click Start and click All Programs.
2. Click Catalyst Control Center.
3. Select CCC.
4. If you find Catalyst Control Center - Basic View, select Advanced then
click next.
5. At Catalyst Control Center windows, select Displays Manager from left
select panel.
6. Click Desktop Area and Refresh Rate to select the one of below
format which is supported on this platform.
* Lists the actual Signal Formats supported by the HDMI monitor you
are using.
7. Click Apply button.
As the port operation of all HDMI (High-Definition Multimedia Interface)
monitors has not be confirmed, some HDMI monitors may not function
properly.
Country/Region Signal Format*
Any 1080i HDTV
Any 720p HDTV
Any 576p EDTV
Any 480p EDTV
Above operation is the way to select Desktop Area and Refresh Rate
format directly. The resolution also can be selected on Display
Manager Tab.