Owner's manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- Chapter 1 - Features, Utilities and Options
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Using the TouchPad/Dual Mode Pad
- Dual Mode Pad Button function (Dual Mode Pad is provided with some models)
- Using the Web Camera (depending on the model purchased)
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs/DVDs on a DVD Super Multi drive or HD DVD-ROM drive supporting double layer disc recording
- Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
- Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- TV-Out & HDMI
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-Up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Modes
- Appendix C - AC Power Cord and Connectors
- Appendix D - If your computer is stolen
- Glossary
User’s Manual B-3
A210
6. In Catalyst Control Center window, setup your television or CRT and
Notebook displays.
* The availability of this feature is dependent on the model you purchased.
Displaying movies on a HDMI Monitor
This section describes how to set up your system to display movies a
HDMI monitor.
To connect a HDMI monitor, follow the steps below.
1. Turn the computer off.
2. Use a HDMI cable (not supplied) to connect the HDMI monitor to the
HDMI out port on your computer.
3. Turn the HDMI monitor on.
4. Turn the computer on.
If a HDMI monitor is connected to the computer, follow the steps below,
based on the configuration of your computer:
1. Click Start and All Programs.
2. Click Catalyst Control Center.
3. Select CCC.
4. In Catalyst Control Center window, select Display manager from left
select panel.
5. You can see a HDMI monitor that connected in the list (If not, you can
click Detect Monitor once)
6. Drag HDMI monitor icon to “Main:” then select Swap Devices.