Owner's manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- Chapter 1 - Features, Utilities and Options
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Using the TouchPad/Dual Mode Pad
- Dual Mode Pad Button function (Dual Mode Pad is provided with some models)
- Using the Web Camera (depending on the model purchased)
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs/DVDs on a DVD Super Multi drive or HD DVD-ROM drive supporting double layer disc recording
- Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
- Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- TV-Out & HDMI
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-Up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Modes
- Appendix C - AC Power Cord and Connectors
- Appendix D - If your computer is stolen
- Glossary
User’s Manual 4-13
A210
Loading optical disc media
To load a disc, follow the steps below.
1. Turn on the power.
2. a. Press the eject button to open the drawer slightly.
Pressing the eject button
b. Pressing the eject button will not open the drawer when the
computer’s power is off. If the power is off, you can open the drawer
by inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Manual release with the eject hole
3. Grasp the drawer gently and pull until it is fully open.
Pulling the drawer open
Eject button