Owner's manual

4-28 User’s Manual
A210
Data Verification
To verify that data is written or rewritten correctly, follow the steps below
before you write or rewrite a Data CD/DVD.
1. Display the setting dialog box by one of the following two steps:
■ Click the setting button ( ) for writing on the main toolbar in the
Data CD/DVD mode.
■ Select Setting for writing Data, and go to CD/DVD in the Setting
menu.
2. Mark the Verify written data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
Media Care
This section provides tips on protecting data stored on your discs.
Handle your media with care. The following simple precautions will
increase the lifetime of your media and protect the data stored on it:
1. Store your discs in the container they came in to protect them and keep
them clean.
2. Do not bend the disc.
3. Do not write on, apply a sticker to, or otherwise mar the surface of the
disc that contains data.
4. Hold the disc by its outside edge or the edge on the center hole.
FingerPrints on the surface can prevent the drive from properly
reading data.
5. Do not expose to direct sunlight, or extreme heat or cold, and do not
place heavy objects on your discs.
6. If your discs become dusty or dirty, wipe them with a clean dry cloth.
Wipe from the center out, do not wipe in a circular direction around the
disc. If necessary, use a cloth dampened in water or a neutral cleaner.
Do not use benzine, thinner or similar cleaner.
7. Do not eat, smoke, or use erasers near your discs. Foreign particles
inside the disk’s jacket can damage the magnetic surface.
8. Magnetic energy can destroy data on discs. Keep your discs away from
speakers, radios, television sets and other sources of magnetic fields.