Owner's manual
Table Of Contents
- User’s Manual
- Table of Contents
- Preface
- Chapter 1 - Features, Utilities and Options
- Chapter 2 - The Grand Tour
- Chapter 3 - Getting Started
- Chapter 4 - Operating Basics
- Using the TouchPad/Dual Mode Pad
- Dual Mode Pad Button function (Dual Mode Pad is provided with some models)
- Using the Web Camera (depending on the model purchased)
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs/DVDs on a DVD Super Multi drive or HD DVD-ROM drive supporting double layer disc recording
- Writing CDs/DVDs/HD DVDs on a HD DVD-R drive
- Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- TV-Out & HDMI
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5 - The Keyboard
- Chapter 6 - Power and Power-Up Modes
- Chapter 7 - HW Setup
- Chapter 8 - Optional Devices
- Chapter 9 - Troubleshooting
- Chapter 10 - Disclaimers
- Appendix A - Specifications
- Appendix B - Display Modes
- Appendix C - AC Power Cord and Connectors
- Appendix D - If your computer is stolen
- Glossary
User’s Manual 5-3
A210
Hotkeys
Fn + ESC Mute Turns the volume on and off.
Fn + F1 Lock Enters “Lock computer” mode. To restore your
desktop, you need to log on again.
Fn + F2 Power Plan Mode Displays the power save modes and
lets you change the power settings
Fn + F3 Sleep This hot key switches the system to Sleep mode.
Fn + F4 Hibernate This hot key switches the system to
Hibernate mode.
Fn + F5 Output Changes displays.
Default resolution for simultaneous mode is set to WXGA (1280x800).
If you connect an RGB (Monitor) that is not WXGA resolution, change it in
“Display Properties”.
Fn + F6 Brightness (decreases)
Fn + F7 Brightness (increases)
Fn + F8 Wireless Pressing this hot key allows you to switch
between active wireless devices if the wireless
communication switch is switched on.
Fn + F9 TouchPad/Dual Mode Pad Enables or disables the
TouchPad/Dual Mode Pad function.
Fn + F10 Cursor Keypad On/Off This hot key enables/disables
the embedded cursor keypad. See chapter 3 for more
information.
Fn + F11 Numeric Keypad On/Off This hot key enables/disables
the embedded numeric keypad. See chapter 3 for more
information.
Fn + F12 Scroll Lock On/Off
Fn + Space Change Resolution Each time when you press the
these hot keys, the resolution will change depending on
the specification of the LCD display panel-with a WXGA
system. You can change the resolution between 800 x
600 pixels and 1024x768/1280x800 pixels.
Fn + 1 Zoom Out To reduce the icon size on the desktop or
the application window, press the
1 key while holding down the Fn key.
Fn + 2
Zoom In To enlarge the icon size on the desktop or the
application window, press the 2 key while holding down
the Fn key.