Gebruikershandleiding L300/L300D-serie computers.toshiba-europe.
L300/L300D-serie Copyright © 2008 by TOSHIBA Corporation. Alle rechten voorbehouden. Krachtens de auteurswetten mag deze handleiding op geen enkele wijze worden verveelvoudigd zonder voorafgaande schriftelijke toestemming van TOSHIBA. Met betrekking tot het gebruik van de informatie in deze handleiding wordt geen octrooirechtelijke aansprakelijkheid aanvaard.
L300/L300D-serie DVD MovieFactory is een handelsmerk van Ulead Systems, Inc. Labelflash™ is een handelsmerk van YAMAHA CORPORATION. Geproduceerd onder licentie van Digital Theater Systems, Inc. Amerikaanse patenten, nrs. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 en andere Amerikaanse en wereldwijde, verleende en aangevraagde patenten. ’DTS’ en ’DTS Digital Surround’ zijn geregistreerde handelsmerken van Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc.
L300/L300D-serie ■ Als u de netadapter met een verlengsnoer gebruikt, zorg dan dat de totale stroomsterkte van de op het verlengsnoer aangesloten apparaten niet hoger is dan de stroomspecificatie van het verlengsnoer. ■ Om de stroomvoorziening naar de computer stop te zetten, schakelt u de computer uit, verwijdert u de accu en verwijdert u de stekker van de netadapter uit het stopcontact.
L300/L300D-serie Modemwaarschuwing Verklaring van overeenstemming De apparatuur is goedgekeurd (conform Commissiebesluit ’CTR21’) voor aansluiting van één apparaat op het PSTN (Public Switched Telephone Network: openbaar geschakeld telefoonnetwerk) in alle Europese landen. Als gevolg van variaties tussen de individuele PSTN’s in verschillende landen vormt deze goedkeuring niet per se een garantie voor storingsvrije werking op elke telefoonaansluiting.
L300/L300D-serie ENERGY STAR®-programma Uw computer voldoet mogelijk aan de ENERGY STAR®-richtlijnen. Als het gekochte model hieraan voldoet, is de computer voorzien van het ENERGY STAR®-logo en is de volgende informatie van toepassing. TOSHIBA neemt deel aan het ENERGY STAR®-programma van de Environmental Protection Agency (EPA). Deze computer voldoet aan de nieuwste ENERGY STAR®-richtlijnen voor energiebesparing.
L300/L300D-serie Het station is van een van de volgende etiketten voorzien: CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APPAREIL A LASER DE CLASSE1 KLASS 1 LASER APPARAT Vóór verzending is het laserapparaat van klasse 1 gecertificeerd conform de normen in hoofdstuk 21 van het Amerikaanse ministerie van volksgezondheid (DHHS 21 CFR). Voor alle andere landen is het station gecertificeerd conform de IEC825- en EN60825-normen voor klasse 1-laserapparaten.
L300/L300D-serie Belangrijke mededeling Auteursrechtelijk beschermd materiaal, met inbegrip van maar niet beperkt tot muziek, video, computerprogramma’s en databases, is beschermd onder het auteursrecht. Tenzij dit uitdrukkelijk is toegestaan volgens toepasselijk auteursrecht, mag u auteursrechtelijk beschermd materiaal zonder de toestemming van de eigenaar van de auteursrechten niet kopiëren, wijzigen, toewijzen, overdragen of anderszins afstaan.
L300/L300D-serie Inhoudsopgave Voorwoord Algemene voorzorgsmaatregelen Hoofdstuk 1 Inleiding Controlelijst van apparatuur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Kenmerken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Speciale voorzieningen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
L300/L300D-serie Hoofdstuk 4 Basisbeginselen Het touchpad gebruiken . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-1 Optische schijfstations gebruiken . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-2 TOSHIBA HD DVD PLAYER gebruiken om HD DVD’s af te spelen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6 De TOSHIBA HD DVD PLAYER-software . . . . . . . . . . . . . . . . . . . . . . .4-9 De computer gebruiken in plaats van een HD DVD-speler. . . .
L300/L300D-serie USB-diskettestation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Externe monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-10 Beveiligingsslot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Hoofdstuk 9 Problemen oplossen Handelwijze bij probleemoplossing . . . .
L300/L300D-serie xii Gebruikershandleiding
L300/L300D-serie Voorwoord Gefeliciteerd met uw nieuwe computer uit de TOSHIBA L300/L300D-serie. Deze krachtige, lichtgewicht notebook staat garant voor jarenlang betrouwbaar computergebruik op hoog niveau. In deze handleiding wordt uitgelegd hoe u uw computer uit de TOSHIBA L300/L300D-serie gebruiksklaar maakt en ermee aan de slag gaat.
L300/L300D-serie Hoofdstuk 4, Basisbeginselen, bevat tips over het onderhoud van de computer en over het gebruik van het touchpad, optische schijfstations, audio-/videobedieningsknoppen, de webcam, de microfoon, de ingebouwde modem, draadloze communicatie en LAN. In hoofdstuk 5, Het toetsenbord, worden speciale toetsenbordfuncties beschreven, zoals de geïntegreerde numerieke toetsen en de sneltoetsen.
L300/L300D-serie Gebruik van toetsen Voor sommige bewerkingen moet u tegelijkertijd twee of meer toetsen indrukken. Dergelijke bewerkingen worden aangeduid door een plusteken (+) tussen de toetsopschriften. Zo betekent CTRL + C dat u op C moet drukken terwijl u CTRL ingedrukt houdt. Als er drie toetsen worden gebruikt, houdt u de eerste twee ingedrukt en drukt u tegelijkertijd op de derde.
L300/L300D-serie xvi Gebruikershandleiding
L300/L300D-serie Algemene voorzorgsmaatregelen TOSHIBA-computers bieden optimale veiligheid en optimaal gebruikerscomfort; bovendien zijn ze robuust, een belangrijke eigenschap voor draagbare computers. U moet echter bepaalde voorzorgsmaatregelen nemen om het risico van lichamelijk letsel of beschadiging van de computer verder te beperken. Lees de onderstaande algemene aanwijzigen en let op de waarschuwingen die in de handleiding worden gegeven.
L300/L300D-serie Verhitting van computeroppervlakken ■ Vermijd langdurig lichamelijk contact met de computer. Indien de computer gedurende een langere periode is gebruikt, kan het oppervlak zeer heet worden. Zelfs als de computer niet heet aanvoelt, kan langdurig lichamelijk contact - bijvoorbeeld wanneer u de computer op uw schoot of uw handen op de polssteun laat rusten - resulteren in rode plekken op de huid. ■ De metalen plaat die de interfacepoorten ondersteunt, kan heet worden.
L300/L300D-serie Hoofdstuk 1 Inleiding Dit hoofdstuk bevat een controlelijst met de geleverde apparatuur en beschrijft de voorzieningen, opties en accessoires van de computer. Sommige voorzieningen die in deze handleiding worden toegelicht, functioneren wellicht niet correct als u een besturingssysteem gebruikt dat niet vooraf door TOSHIBA is geïnstalleerd. Controlelijst van apparatuur Verwijder de computer voorzichtig uit de verpakking. Berg de doos en het verpakkingsmateriaal op voor toekomstig gebruik.
L300/L300D-serie Software Microsoft® Windows Vista™ De volgende software is vooraf geïnstalleerd: ■ Microsoft® Windows Vista™ ■ Modemstuurprogramma (kan alleen worden gebruikt voor modellen met een modem) ■ Schermstuurprogramma’s voor Windows ■ LAN-stuurprogramma ■ Stuurprogramma voor het aanwijsapparaat ■ TOSHIBA Gezichtsherkenning (vooraf geïnstalleerd op sommige modellen) ■ Geluidsstuurprogramma voor Windows ■ Ulead DVD MovieFactory® for TOSHIBA ■ Stuurprogramma voor draadloos LAN (kan alleen worden geb
L300/L300D-serie Kenmerken Deze computer biedt de volgende voorzieningen en voordelen: Processor Ingebouwd Ga naar de website voor uw gebied voor de configuratiegegevens van het model dat u hebt aangeschaft. Geheugen Sleuven In de twee geheugensleuven kunnen PC-5300 geheugenmodules van 512 MB, 1024 MB of 2048 MB worden geïnstalleerd. De maximale grootte en snelheid van het systeemgeheugen hangen af van het aangeschafte model.
L300/L300D-serie Als uw computer is geconfigureerd met twee geheugenmodules van 2 GB, kan de geheugencapaciteit worden weergegeven als slechts circa 3 GB (afhankelijk van de hardwarespecificaties van de computer). Dit is correct aangezien het besturingssysteem gewoonlijk de beschikbare hoeveelheid geheugen weergeeft in plaats van de hoeveelheid fysiek geheugen (RAM) die in de computer is ingebouwd.
L300/L300D-serie DVD Super Multistation (±R DL) Gebruikershandleiding Sommige modellen zijn uitgerust met een DVD Super Multi (±R DL)-stationsmodule van volledige grootte waarmee u zonder adapter gegevens op herschrijfbare CD’s/DVD’s kunt vastleggen en CD’s/DVD’s kunt lezen. De maximale leessnelheid is 8-speed voor DVD-ROM en 24-speed voor CD-ROM.
L300/L300D-serie HD DVD-ROM-station Sommige modellen zijn uitgerust met een HD DVD-ROM-stationsmodule van volledige grootte waarin u CD’s/DVD’/HD DVD’s zonder adapter kunt gebruiken. Het station leest DVD-ROM’s met een maximale snelheid van 8-speed, CD-ROM’s met 24-speed en HD DVD’s met 1-speed. De maximale schrijfsnelheid bedraagt 16-speed voor CD-R, 10-speed voor CD-RW, 4-speed voor DVD-R en DVD+R, 4-speed voor DVD-RW en DVD+RW 2-speed voor DVD-R DL, 2,4-speed voor DVD+R DL en 3-speed voor DVD-RAM.
L300/L300D-serie Aanwijsapparaat Ingebouwd Met het touchpad en de besturingsknoppen in de polssteun kunt u de schermaanwijzer verplaatsen. Stroom Accu-eenheid De computer wordt van stroom voorzien door één oplaadbare lithium-ion accu-eenheid. RTC-batterij De computer heeft een interne batterij voor de interne RTC (Real Time Clock) en kalender. Netadapter De universele netadapter voorziet het systeem van stroom en laadt de accu’s op wanneer deze opraken.
L300/L300D-serie Sleuven Sleuf voor meerdere Door middel van deze sleuf kunt u gemakkelijk digitale mediakaarten gegevens overbrengen van apparaten, zoals digitale camera’s en PDA’s (Personal Digital Assistants), die gebruikmaken van flashgeheugen (SD-, SDHC-, MS-, MS Pro- of MMC-geheugenkaarten). (Aanwezig op sommige modellen.) PC-kaartsleuf Een PC-kaartsleuf biedt ruimte voor één PC-kaart van 5 mm (Type II). Raadpleeg hoofdstuk 8, Optionele apparaten, voor meer informatie. (Aanwezig op sommige modellen.
L300/L300D-serie Communicatie LAN De computer is uitgerust met een LAN-kaart die Ethernet LAN (10 Mbit/s, 10BASE-T) of Fast Ethernet LAN (100 Mbit/s, 100BASE-TX) ondersteunt. In sommige verkoopgebieden wordt deze standaard in de fabriek geïnstalleerd. Draadloos LAN De minikaart voor draadloos LAN is compatibel met andere LAN-systemen die zijn gebaseerd op DSSS-/OFDM-radiotechnologie (Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing) en die voldoen aan de IEEE 802.
L300/L300D-serie Software Besturingssysteem Microsoft® Windows Vista™ is beschikbaar. Raadpleeg het gedeelte over vooraf geïnstalleerde Software aan het begin van dit hoofdstuk. TOSHIBA Hulpprogramma’s Een aantal hulp- en stuurprogramma’s is vooraf geïnstalleerd om het gebruik van de computer te vergemakkelijken. Raadpleeg de paragraaf Hulpprogramma’s en toepassingen in dit hoofdstuk.
L300/L300D-serie Systeem in automatische slaapstand/ sluimerstand Met deze functie wordt het systeem automatisch in de slaapstand of de sluimerstand gezet als een bepaalde tijd geen invoer of hardwareactiviteit heeft plaatsgevonden. Dit kan worden ingesteld via Energiebeheer. Geïntegreerde numerieke toetsen Het toetsenbord heeft tien geïntegreerde numerieke toetsen. Raadpleeg het gedeelte Geïntegreerde numerieke toetsen in hoofdstuk 5, Het toetsenbord, voor informatie over het gebruik van deze toetsen.
L300/L300D-serie Warmteverspreiding De CPU heeft een interne temperatuursensor ter bescherming tegen oververhitting. Als de interne temperatuur van de een bepaald niveau bereikt, wordt de ventilator ingeschakeld of wordt de CPU-verwerkingssnelheid verlaagd. Dit kan worden ingesteld via Energiebeheer. Maximale prestaties Eerst wordt de ventilator ingeschakeld en vervolgens wordt zo nodig de CPU-verwerkingssnelheid verlaagd.
L300/L300D-serie TOSHIBA PCdiagnoseprogramma Het TOSHIBA PC-diagnoseprogramma toont basisgegevens over de configuratie van de computer en biedt de mogelijkheid de functionaliteit van bepaalde ingebouwde hardwareapparaten in de computer te testen. TOSHIBAflashkaarten Dit hulpprogramma ondersteunt de volgende functies.
L300/L300D-serie 1-14 TOSHIBA DVD PLAYER Deze software wordt meegeleverd voor weergave van DVD-Video. (Deze software is vooraf geïnstalleerd op modellen met een DVD Super Multi-station.) TOSHIBA HD DVD PLAYER Deze software wordt meegeleverd voor weergave van HD DVD-Video en DVD-Video. (Deze software is vooraf geïnstalleerd op modellen met een HD DVD-ROM-station.
L300/L300D-serie TOSHIBA Gezichtsherkenning TOSHIBA Gezichtsherkenning gebruikt een bibliotheek voor gezichtsverificatie om het gezicht van de gebruiker te verifiëren wanneer deze zich aanmeldt bij Windows. Als de verificatie slaagt, wordt de gebruiker automatisch aangemeld bij Windows. De gebruiker hoeft in dit geval dus geen wachtwoord in te voeren, waardoor de aanmelding gemakkelijker verloopt. (Deze software is vooraf geïnstalleerd, afhankelijk van het gekochte model.
L300/L300D-serie 1-16 Accu-eenheid Een extra accu-eenheid van 3 cellen (PA3533U-1BRS/PA3533U-1BAS), 6 cellen (PA3534U-1BRS/ PA3534U-1BAS) of 9 cellen (PA3535U-1BRS/ PA3535U-1BAS) is verkrijgbaar bij de TOSHIBA-leverancier. Deze eenheid is identiek aan de eenheid waarmee uw computer is geleverd. U kunt deze als reserve-exemplaar of ter vervanging gebruiken.
L300/L300D-serie Hoofdstuk 2 Rondleiding In dit hoofdstuk worden de verschillende onderdelen van de computer geïdentificeerd. Maak uzelf vertrouwd met elk onderdeel voordat u met de computer aan de slag gaat. Voorkant met gesloten beeldscherm De volgende afbeelding illustreert de voorkant van de computer met het beeldscherm gesloten.
L300/L300D-serie Sleuf voor meerdere Door middel van deze sleuf kunt u gemakkelijk digitale mediakaarten gegevens overbrengen van apparaten, zoals digitale camera’s en PDA’s, die gebruikmaken van flashgeheugen (SD/SDHC/MS/MS Pro/ MMC-geheugenkaarten). (Meegeleverd bij sommige modellen.) Beeldschermvergrendeling Deze vergrendelingsschuif zet het LCD-scherm vast wanneer dit gesloten is. Duw de vergrendelingsschuif opzij om het beeldscherm te openen.
L300/L300D-serie Blokkeer nooit de ventilatieopening. Zorg dat er geen voorwerpen in deze openingen terechtkomen. Een speld of soortgelijk voorwerp kan de schakelingen van de computer beschadigen. HDMI-uit-poort Op de HDMI-uit-poort kan een HDMI-kabel met een Type A-connector worden aangesloten. Een HDMI-kabel kan video-, audio- en aansturingssignalen verzenden en ontvangen.(Aanwezig op sommige modellen.) LAN-aansluiting Via deze poort kunt u de computer op een LAN aansluiten.
L300/L300D-serie Rechterkant De volgende afbeelding illustreert de rechterkant van de computer. Sleuf beveiligingsslot USB-poort Optisch schijfstation DC IN 19 V Afbeelding 2-3 Rechterkant van de computer Universal Serial Bus-poort (USB 2.0) De USB 2.0-compatibele poort ondersteunt gegevensoverdrachtsnelheden die 40 maal hoger zijn dan met de USB 1.1-norm. (De poort ondersteunt tevens USB 1.1.) Zorg dat er geen voorwerpen in de USB-aansluitingen terechtkomen.
L300/L300D-serie Achterkant De volgende afbeelding illustreert de achterkant van de computer. Modemaansluiting* *Afhankelijk van het gekochte model Afbeelding 2-4 De achterzijde van de computer Modemaansluiting In gebieden waarin standaard een interne modem is geïnstalleerd, beschikt u over een modempoort waarmee u de modem via een modulaire kabel rechtstreeks op een telefoonlijn kunt aansluiten. In sommige verkoopgebieden wordt de modem niet ondersteund. (Aanwezig op sommige modellen.
L300/L300D-serie Accu-eenheid De accu-eenheid voorziet de computer van stroom wanneer de netadapter niet is aangesloten. In de paragraaf Accu-eenheid in hoofdstuk 6, Stroomvoorziening en spaarstanden, wordt toegelicht hoe u toegang verkrijgt tot de accu-eenheid. U kunt aanvullende accu-eenheden aanschaffen bij uw TOSHIBAleverancier en zo de gebruiksduur van de computer verlengen. Ontgrendelingsschuif Duw deze schuif opzij om de accu-eenheid te accuhouder ontgrendelen.
L300/L300D-serie Voorkant met geopend beeldscherm De volgende afbeelding illustreert de voorkant van de computer met het beeldscherm geopend. U opent het beeldscherm door dit omhoog te kantelen en op een aangename kijkhoek te plaatsen.
L300/L300D-serie Touchpad Hiermee kunt u de aanwijzer verplaatsen en items op het scherm selecteren of activeren. Het touchpad kan worden geconfigureerd voor het uitvoeren van andere muisfuncties, zoals schuiven (scrollen) en dubbelklikken. Touchpadbesturings- Deze knoppen werken op dezelfde manier als de knoppen linker- en rechterknop van een externe muis.
L300/L300D-serie Systeemlampjes De volgende afbeelding illustreert de systeemlampjes die tijdens de verschillende computerbewerkingen branden. Meervoudige digitale mediakaart Vaste schijf/optisch station Hoofdaccu DC IN Aan/uit Afbeelding 2-7 Systeemlampjes DC IN Het DC IN-lampje brandt groen als via de netadapter gelijkstroom (DC) wordt geleverd. Als er problemen zijn met de uitgangsspanning van de adapter of met de stroomvoorziening, brandt dit lampje niet.
L300/L300D-serie Toetsenbordlampjes In de volgende afbeelding ziet u waar de lampjes van de geïntegreerde numerieke toetsen en het CAPS LOCK-lampje zich bevinden. Als het CAPS LOCK-lampje brandt, is de functie voor hoofdlettervergrendeling ingeschakeld. CAPS LOCK-lampje Afbeelding 2-8 CAPS LOCK-lampje CAPS LCOK Dit lampje brandt groen als de hoofdlettervergrendeling is ingeschakeld voor lettertoetsen.
L300/L300D-serie Optisch schijfstation Er is een DVD Super Multi-station (± R DL) of een HD DVD-ROM-station in de computer geïnstalleerd. Zodra de computer toegang heeft tot een CD/DVD/HD DVD, gaat het lampje op het station branden. De HD DVD In dit gedeelte worden de functies en het gebruik van HD DVD en HD DVD-media beschreven. Samenvatting Met HD DVD kunnen gebruikers genieten van video, concerten en ander beeldinhoud, dankzij de grote hoeveelheid opslagruimte en audio en video van hoge kwaliteit.
L300/L300D-serie ■ Tijdens de weergave van inhoud met een hoge bitsnelheid kunnen frames wegvallen, kan het geluid overslaan of kunnen de computerprestaties afnemen. ■ Als u HD DVD-inhoud op een extern beeldscherm wilt weergeven, moet dit scherm een HDCP-compatibele HDMI™- of DVI-ingang bevatten. ■ Sluit de netadapter van de computer aan wanneer u een HD DVD afspeelt.
L300/L300D-serie Beschrijfbare schijven In deze paragraaf worden de verschillende soorten beschrijfbare CD’s/DVD’s/HD DVD’s beschreven. Controleer in de specificaties voor uw station welke schijftypen kunnen worden beschreven. Gebruik TOSHIBA Disc Creator om CD’s te beschrijven. Zie hoofdstuk 4, Basisbeginselen. CD’s ■ Beschrijfbare CD’s (CD-R’s) kunnen slechts één keer worden beschreven. De opgenomen gegevens kunnen niet worden gewist of veranderd.
L300/L300D-serie DVD Super Multi-station (±R DL) In de DVD Super Multi-stationsmodule (± R DL) van volledige grootte kunt u zonder adapter gegevens op herschrijfbare CD’s vastleggen en CD’s/DVD’s van 12 of 8 cm lezen. In het midden van een schijf is de leessnelheid lager dan aan de rand.
L300/L300D-serie Netadapter De netadapter zet wisselstroom om in gelijkstroom en reduceert de spanning die aan de computer wordt geleverd. De netadapter kan zich automatisch aanpassen aan elke spanning tussen 100 en 240 volt en aan een frequentie van 50 of 60 hertz, waardoor u de computer in praktisch elk land kunt gebruiken. Om de accu op te laden sluit u de netadapter eenvoudig aan op een voedingsbron en op de computer. Raadpleeg hoofdstuk 6, Stroomvoorziening en spaarstanden, voor meer informatie.
L300/L300D-serie 2-16 Gebruikershandleiding
L300/L300D-serie Hoofdstuk 3 Voor u begint Dit hoofdstuk bevat basisinformatie om met de computer aan de slag te gaan. De volgende onderwerpen worden behandeld: Lees ook de Instructiegids voor veiligheid en comfort. In deze gids wordt productaansprakelijkheid toegelicht.
L300/L300D-serie De netadapter aansluiten Sluit de netadapter aan wanneer u de accu moet opladen of via de netvoeding wilt werken. Dit is tevens de snelste manier om met de computer aan de slag te gaan, omdat de accu-eenheid eerst moet worden opgeladen voordat u de computer hiermee van stroom kunt voorzien. De netadapter kan worden aangesloten op elk stopcontact dat tussen 100 en 240 volt, en 50 of 60 hertz levert.
L300/L300D-serie Het beeldscherm openen Het LCD-scherm kan in een aantal standen worden gezet voor optimaal kijkgemak. U opent het beeldscherm door de vergrendelingschuif naar rechts te schuiven en het scherm omhoog te kantelen naar de beste kijkhoek. Wanneer u het scherm opent, dient u de onderkant steven vast te houden en de monitor langzaam omhoog te kantelen.
L300/L300D-serie Voor het eerst opstarten Wanneer u de computer voor het eerst inschakelt, verschijnt het opstartscherm van Microsoft® Windows Vista™. Volg de aanwijzingen op het scherm. De computer uitschakelen U kunt de computer uitschakelen in een van de volgende drie modi: afsluitmodus (ofwel opstartmodus), sluimerstand of slaapstand.
L300/L300D-serie Voordelen van de sluimerstand De voordelen van de sluimerstand zijn: ■ Wanneer de computer automatisch wordt afgesloten omdat de accu bijna leeg is, worden gegevens op de vaste schijf opgeslagen. De computer kan alleen in de sluimerstand worden gezet als de sluimerstand op twee plaatsen is ingeschakeld: op het tabblad Sluimerstand van het onderdeel Energiebeheer en op het tabblad Actie instellen van Power Option.
L300/L300D-serie Gegevensopslag in de sluimerstand Zodra u de computer in de sluimerstand afsluit, worden de gegevens uit het geheugen op de vaste schijf opgeslagen, wat enkele ogenblikken zal duren. Gedurende deze tijd brandt het schijflampje. Nadat u de computer hebt uitgeschakeld en de geheugeninhoud op de vaste schijf is opgeslagen, dient u eventuele randapparaten uit te schakelen. Schakel de computer of randapparaten niet meteen weer in. Wacht even tot alle condensatoren volledig zijn ontladen.
L300/L300D-serie De slaapstand uitvoeren U kunt de slaapstand ook activeren door op FN + F3 te drukken. Zie hoofdstuk 5, Het toetsenbord, voor meer informatie. U kunt de slaapstand op een van de volgende drie manieren activeren: 1. Klik op de knop Start van Windows, wijs aan en klik op Slaapstand. 2. Sluit het beeldscherm. Deze functie moet ingeschakeld zijn. Zie Energiebeheer in het Configuratiescherm. 3. Druk op de aan/uit-knop. Deze functie moet ingeschakeld zijn.
L300/L300D-serie Opties voor systeemherstel Een verborgen partitie van circa 1,5 GB op de vaste schijf is toegewezen voor de opties voor systeemherstel. Deze partitie herstelt bestanden die kunnen worden gebruikt om het systeem te herstellen in geval van problemen. De opties voor systeemherstel kunnen niet meer worden gebruikt als deze partitie wordt verwijderd. De opties voor systeemherstel zijn op de vaste schijf geïnstalleerd bij aflevering uit de fabriek.
L300/L300D-serie Optische herstelschijven maken In dit gedeelte wordt beschreven hoe u herstelschijven maakt. ■ Vergeet niet de netadapter aan te sluiten wanneer u herstelschijven maakt. ■ Sluit alle softwareprogramma’s behalve de Herstelschijf maken. ■ Voer geen programma’s uit die de processor zwaart belasten, zoals een schermbeveiliging. ■ Zorg dat de computer op volledige energie werkt. ■ Gebruik geen energiebesparingsfuncties. ■ Schrijf niet naar de schijf terwijl anti-virussoftware actief is.
L300/L300D-serie De vooraf geïnstalleerde software herstellen met de gemaakte herstelschijven Als de vooraf geïnstalleerde bestanden beschadigd zijn, kunt u de computer in de oorspronkelijke staat herstellen met de herstelschijven die u hebt gemaakt. Volg de onderstaande stappen als u deze herstelbewerking wilt uitvoeren: Als u het geluid hebt gedempt door op FN + ESC te drukken, schakel het geluid dan in, zodat geluiden hoorbaar zijn voordat u het herstelproces start.
L300/L300D-serie Zorg ervoor dat u de netadapter aansluit, omdat de accu tijdens het herstelproces leeg kan raken. Wanneer u het Windows-besturingssysteem opnieuw installeert, wordt de vaste schijf opnieuw geformatteerd, waardoor alle gegevens erop verloren gaan. 1. Schakel de computer uit. 2. Zet de computer aan. Wanneer het TOSHIBA-scherm herhaaldelijk verschijnt, drukt u op de toets F8. 3. Het menu Advanced Boot Options (Geavanceerde opstartopties) wordt weergegeven.
L300/L300D-serie 3-12 Gebruikershandleiding
L300/L300D-serie Hoofdstuk 4 Basisbeginselen In dit hoofdstuk worden de grondbeginselen van computergebruik toegelicht; zo wordt ingegaan op het gebruik van het touchpad, optische stations, audio-/videobedieningsknoppen, de webcam, de microfoon, de interne modem, draadloze communicatie en LAN. U krijgt ook tips voor het onderhoud van de computer en het omgaan met en CD’s/DVD’s/HD DVD’s.
L300/L300D-serie Optische schijfstations gebruiken Het station van volledige grootte ondersteunt snelle uitvoering van programma’s op CD/DVD/HD DVD. U kunt CD’s/DVD/’s/HD DVD’s zonder adapter gebruiken. Wanneer de computer toegang heeft tot een CD/DVD/HD DVD, gaat het lampje op het station branden. ■ Gebruik de toepassing TOSHIBA DVD PLAYER als u DVD-video’s wilt bekijken.(Model met CD-RW-/DVD-ROM-station of DVD Super Multi-station (± R DL).
L300/L300D-serie b. U kunt de lade niet met de ejectknop openen wanneer het station is uitgeschakeld. In dat geval kunt u de lade openen door een dun voorwerp (ongeveer 15 mm lang) zoals een rechtgebogen paperclip in het uitwerpgaatje rechts van de uitwerpknop te steken. 15 mm Uitwerpgaatje Doorsnee van 1,0 mm Afbeelding 4-3 De lade openen door middel van het uitwerpgaatje 2. Trek de lade voorzichtig uit totdat deze volledig is geopend. Afbeelding 4-4 De lade opentrekken 3.
L300/L300D-serie Wanneer de lade volledig is uitgeschoven, steekt de rand van de computer iets uit over de CD-/DVD-/HD DVD-lade. Wanneer u de CD/DVD/HD DVD in de lade plaatst, moet u de schijf daarom schuin houden. Controleer altijd of de CD/DVD/HD DVD goed vlak in de lade ligt, zoals geïllustreerd in afbeelding. ■ Raak de laserlens niet aan. Hierdoor kunt u de uitlijning ervan verstoren. ■ Zorg dat er geen stof, vuil of voorwerpen in het station terechtkomen.
L300/L300D-serie Schijven verwijderen Voer de volgende stappen uit en raadpleeg de onderstaande afbeelding om de CD/DVD/HD DVD te verwijderen. Druk niet op de ejectknop terwijl er activiteit op het station plaatsvindt. Wacht tot het lampje van het optische station uitgaat voordat u de lade opent. Neem de CD/DVD/HD DVD pas uit de lade nadat de schijf is opgehouden met draaien. 1. Druk op de uitwerpknop om de lade een stukje te openen. Trek de lade voorzichtig open.
L300/L300D-serie TOSHIBA HD DVD PLAYER gebruiken om HD DVD’s af te spelen Afspeelbeperkingen voor HD DVD’s Bij modellen met een HD DVD-ROM-station kunnen gebruikers genieten van de prachtige beelden van HD DVD-Video. De software TOSHIBA HD DVD PLAYER wordt meegeleverd voor weergave van HD DVD-Video. Opmerkingen betreffende het gebruik Weergave van HD DVD ■ HD DVD is een nieuwe standaard die gebruik maakt van nieuwe technologieën.
L300/L300D-serie Tijdens gebruik ■ Er kunnen frames wegvallen, het geluid kan overslaan en het geluid en beeld kunnen niet meer synchroon lopen tijdens de weergave van bepaalde HD DVD-Video-titels. ■ Sluit alle andere toepassingen wanneer u TOSHIBA HD DVD PLAYER gebruikt. Open geen andere toepassingen en voer geen andere bewerkingen uit tijdens de weergave van HD DVD-Video. De weergave kan in sommige gevallen stoppen of niet correct werken.
L300/L300D-serie ■ Als u de video die in TOSHIBA HD }DVD PLAYER wordt afgespeeld, wilt weergeven op een extern beeldscherm of een televisie, moet het externe beeldscherm of de televisie beschikken over een HDCPcompatibele HDMI-ingang. ■ Wanneer u beelden op een extern scherm of een televisie bekijkt, sluit het externe apparaat dan met een HDMI-kabel aan op de HDMI-uitgang en verander van weergaveapparaat voordat u de weergave start. Het beeldscherm kan tijdens de weergave niet worden gewijzigd.
L300/L300D-serie De TOSHIBA HD DVD PLAYER-software TOSHIBA HD DVD PLAYER starten 1. Voer de volgende stappen uit om TOSHIBA HD DVD PLAYER te starten. Plaats een HD DVD-Video in het HD DVD-station terwijl Windows Vista™ wordt uitgevoerd. Als een HD DVD-Video-schijf of een HD DVD (schijf met dubbele indeling) in het HD DVD-station is geplaatst, kan het volgende venster voor toepassingsselectie verschijnen.
L300/L300D-serie ■ Alleen de bedieningsknoppen (waaronder die op de afstandsbediening en de panelen op het voorpaneel) die overeenkomen met de momenteel beschikbare en actieve functies kunnen worden gebruikt terwijl een HD DVD wordt afgespeeld. ■ Als het menu in het weergavegebied is geopend via het bovenste menu of de menuknoppen in het bedieningsvenster, kunnen het touchpad en de muis mogelijk niet worden gebruikt om het menu te bedienen.
L300/L300D-serie Instellingen Hiermee geeft u het instellingenvenster weer. Help Opent de Help. Minimaliseren Minimaliseert het venster van TOSHIBA HD DVD PLAYER. Afsluiten Sluit TOSHIBA HD DVD PLAYER. Bedieningsvenster van TOSHIBA HD DVD PLAYER Met de knoppen op het paneel regelt u de weergave van HD DVD-Video-schijven. Klik op het weergavegebied om het bedieningsvenster weer te geven als dit niet zichtbaar is.
L300/L300D-serie Altijd op voorgrond Plaatst het bedieningsvenster altijd op de voorgrond, zodat dit niet wordt verborgen door andere vensters of de schermvullende weergave. Afsluiten Sluit TOSHIBA HD DVD PLAYER. Huidige positie Toont de huidige positie in de titel op het balkpictogram. Volumeregeling Past het volume aan naar het het niveau waarnaar de schuif wordt versleept. Dempen Het geluid wordt gedempt wanneer u hierop klikt.
L300/L300D-serie Herhalen met één druk Spoelt een bepaalde tijdsduur terug en vervolgt de weergave vanaf die positie. Overslaan met één druk Spoelt een bepaalde tijdsduur vooruit en vervolgt de weergave vanaf die positie. Slow motion Speelt af in slow motion.
L300/L300D-serie De computer gebruiken in plaats van een HD DVD-speler De beschikbaarheid van deze functie is afhankelijk van het aangeschafte model. Video’s die worden afgespeeld met TOSHIBA HD DVD PLAYER, dat bij de computer wordt geleverd, kunnen worden weergegeven op een televisie met een HDMI-ingang. HD DVD-Video kan alleen worden weergegeven op het scherm van de computer of op een televisie die is aangesloten op de HDMI-uitgang.
L300/L300D-serie Schakelen tussen het computer- en het televisiescherm U kunt de volgende methode gebruiken om HD DVD-Video weer te geven. U kunt de weergavemethode wijzigen door de instelling voor het weergaveapparaat te wijzigen. Configureer de volgende instellingen als u HD DVD-Video op de televisie wilt weergeven. Als de volgende instellingen niet zijn geconfigureerd, wordt HD DVD-Video niet weergegeven op de televisie.
L300/L300D-serie CD’s/DVD’s schrijven met een DVD Super Multi-station (± R DL)/HD DVD-ROM-station Sommige modellen zijn voorzien van een DVD Super Multi-station (± R DL)/HD DVD-ROM-station van volledige grootte waarmee gegevens kunnen worden geschreven op CD-R/-RW of DVD-R/-RW/+R/+RW/-RAM/+R DL/-R DL. De volgende toepassingen voor schrijven worden ondersteund: TOSHIBA Disc Creator. Ulead DVD Movie Factory® for TOSHIBA, een product van Ulead Systems, Inc.
L300/L300D-serie DVD-RW: DVD-specificaties voor DVD-RW-schijven voor algemeen gebruik, versie 1.2 MITSUBISHI KAGAKU MEDIA CO., LTD. Victor Company of Japan, Ltd. DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-RAM: DVD-specificaties voor DVD-RAM-schijven, versie 2.0, versie 2.1 of versie 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. DVD+R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R voor Labelflash™: FUJIFILM Corporation.
L300/L300D-serie ■ Wij ondersteunen alleen indeling 1 van DVD-R DL. Daarom kunt u niets extra schrijven. Als uw gegevens op een DVD-R (SL) passen, raden wij aan een DVD-R (SL) te gebruiken. ■ U kunt DVD-RAM-schijven gebruiken die u uit hun omhulsel kunt verwijderen en DVD-RAM-schijven die geen omhulsel bevatten. U kunt geen gebruik maken van enkelzijdige schijven met een capaciteit van 2,6 GB of van dubbelzijdige schijven met een capaciteit van 5,2 GB.
L300/L300D-serie ■ Gebruik geen vasteschijfprogramma’s, met inbegrip van hulpprogramma’s voor snelle schijftoegang. Doet u dit toch, dan loopt u het risico van storingen en gegevensverlies. ■ Schrijf vanaf de vaste schijf van de computer naar de CD/DVD. Probeer niet te schrijven vanaf gedeelde apparaten zoals een LAN-server of andere netwerkapparaten. ■ Schrijven met andere software dan TOSHIBA Disc Creator wordt niet aangeraden.
L300/L300D-serie Afwijzing van aansprakelijkheid (DVD Super Multi-station (± R DL)/ HD DVD-ROM-station TOSHIBA is niet aansprakelijk voor: ■ Beschadiging van CD-R/-RW- of DVD-R/-R DL/-RW/+R/+R DL/+RW/ -RAM-schijven als gevolg van het schrijf- of herschrijfproces. ■ Wijziging of verlies van de opgenomen inhoud van een CD-R/-RW of DVD-R/-RW/+R/+RW/-RAMals gevolg van het (her)schrijfproces, of hieruit voortvloeiende winstderving of bedrijfsonderbreking.
L300/L300D-serie ■ Met de functie ’Schijfback-up’ van TOSHIBA Disc Creator kunt u mogelijk geen back-up maken van een DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, HD DVD-R of HD DVD-RW die met andere software op een andere recorder is gemaakt. ■ Als u gegevens toevoegt aan een DVD-R, DVD-R DL, DVD+R, DVD+R DL, HD DVD-R of HD DVD-RW waarop reeds gegevens zijn opgenomen, kunnen de toegevoegde gegevens in bepaalde omstandigheden niet worden gelezen.
L300/L300D-serie Video Met Ulead DVD MovieFactory® for TOSHIBA kunt u video opnemen. Wanneer u Ulead DVD MovieFactory® voor TOSHIBA gebruikt Een Labelflash-DVD maken (optioneel) De beschikbaarheid van deze functie is afhankelijk van het aangeschafte model. Eenvoudige stappen voor het maken van een Labelflash-DVD: 1. Plaats een Labelflash-schijf in het DVD-station. Stel AFDRUKBARE OPPERVLAK voor onderkant in. 2.
L300/L300D-serie Vereenvoudigde stappen om een DVD-video te maken van een toegevoegde videobron: 1. Klik op Start -> Alle programma’s -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher om DVD MovieFactory te starten. 2. Klik op Video Disc (Videoschijf) -> New Project (Nieuw project) om de tweede Launcher te starten, selecteer uw projecttype en start vervolgens DVD MovieFactory. 3.
L300/L300D-serie ■ Sluit alle andere programma’s terwijl u video opneemt op DVD. ■ Voer geen programma’s uit die de CPU belasten, zoals een schermbeveiliging. ■ Mp3-bestanden coderen of decoderen wordt niet ondersteund. 2. Voor u de video opneemt op DVD ■ Als u opneemt op DVD, gebruik dan alleen schijven die worden aanbevolen door de fabrikant van het station. ■ Stel de werkschijf niet in op een traag apparaat, zoals een vaste schijf met USB 1.1, omdat anders geen DVD’s geschreven kunnen worden.
L300/L300D-serie Behandeling van schijven Dit gedeelte bevat tips voor het beschermen van de gegevens die u op CD, DVD of HD DVD hebt opgeslagen. Ga voorzichtig om met schijven. Door de volgende eenvoudige richtlijnen in acht te nemen kunt u de gebruiksduur van uw media verlengen en de erop opgeslagen gegevens beschermen: CD/DVD/HD DVD 1. Bewaar uw CD’s/DVD’s/HD DVD’s in hun originele doosjes om ze te beschermen en schoon te houden. 2. Buig de CD/DVD/HD DVD niet. 3.
L300/L300D-serie De software gebruiken De software voor de webcam is vooraf geconfigureerd om te worden gestart wanneer u Windows Vista™ inschakelt. Als u de software opnieuw moet starten, selecteert u Start -> Programma’s -> Camera Assistant Software -> Camera Assistant Software.
L300/L300D-serie Properties (Eigenschappen) Het tabblad Options bevat opties voor spiegelen, zoomen, beeldsnelheid, nachtmodus en tegenlichtcorrectie. Op het tabblad Image (Beeld) kunt u kleurinstellingen wijzigen, terwjil u op het tabblad Profile (Profiel) de lichtomstandigheden kunt wijzigen.
L300/L300D-serie Modem De beschikbaarheid van deze functie is afhankelijk van het aangeschafte model. In deze paragraaf wordt beschreven hoe u de interne modem aan een telefoonaansluiting koppelt en ervan ontkoppelt. De interne modem ondersteunt geen spraakfuncties. De data- en faxfuncties worden wel ondersteund. ■ Bij onweer dient u de modemkabel uit de telefoonaansluiting te verwijderen ■ Sluit de modem niet op een digitale telefoonlijn aan.
L300/L300D-serie Menu Eigenschappen Klik met de secundaire knop op het pictogram om het volgende menu weer te geven. Afbeelding 4-17 De menulijst (Windows Vista™) Instelling U kunt de volgende instellingen in- of uitschakelen: Automatisch uitvoeren Het hulpprogramma voor regioselectie wordt automatisch gestart wanneer u het besturingssysteem start. Dialoogvenster Keuze-opties openen na selectie van de regio Het dialoogvenster Keuze-opties wordt automatisch geopend nadat u de regio hebt geselecteerd.
L300/L300D-serie Bezig met verbinden Om de kabel van de interne modem aan te sluiten voert u de volgende stappen uit. 1. Steek één uiteinde van de modemkabel in de modempoort. 2. Koppel het andere uiteinde van de modemkabel aan een telefoonaansluiting. Modemaansluiting Telefoonaansluiting Afbeelding 4-18 De interne modem aansluiten U dient niet aan de kabel te trekken of de computer te verplaatsen terwijl de kabel is aangesloten.
L300/L300D-serie ■ Zwerven (roaming) over meerdere kanalen ■ Kaartenergiebeheer ■ WEP-gegevenscodering (WEP = Wired Equivalent Privacy), gebaseerd op het 128-bits coderingsalgoritme (Atheros-moduletype). ■ 11a, 11b, 11g en 11n (draadloos) zijn gebaseerd op respectievelijk IEEE 802.11a, 802.11b, 802.11g en 802.11n. De IEEE 802.11nspecificatie is niet voltooid en is nog in de conceptfase (Draft). De TOSHIBA 11a/b/g/n WLAN-adapters zijn gebaseerd op de conceptversie, versie 2.0, van de IEEE 802.
L300/L300D-serie Lampje voor draadloze communicatie Het lampje voor draadloze communicatie geeft de status van de functies voor draadloze communicatie aan. Status van het lampje Betekenis Lampje uit Schakelaar voor draadloze communicatie staat op uit. Automatisch uitgeschakeld wegens oververhitting. Stroomstoring Lampje aan Schakelaar voor draadloze communicatie staat op aan. Het draadloze LAN is ingeschakeld door een toepassing.
L300/L300D-serie De LAN-kabel aansluiten De computer moet correct worden geconfigureerd voordat u verbinding met een LAN maakt. Als u zich bij een LAN aanmeldt terwijl de standaardinstellingen van de computer van kracht zijn, kunnen storingen in het LAN optreden. Vraag de LAN-beheerder naar de juiste configuratieprocedures. Als u Fast Ethernet LAN (100 Mbit/s, 100BASE-TX) gebruikt, dient u de computer aan te sluiten met een kabel uit categorie 5 (CAT5) of hoger.
L300/L300D-serie Computer schoonmaken Om een lange gebruiksduur en storingsvrij gebruik te waarborgen dient u de computer stofvrij te houden en voorzichtig te zijn met vloeistoffen in de buurt van de computer. ■ Mors geen vloeistoffen in de computer. Als de computer toch nat wordt, schakelt u onmiddellijk de stroom uit; laat de computer volledig drogen voordat u hem weer aanzet. ■ Reinig de computer met een licht (met water) bevochtigde doek. Voor het beeldscherm kunt u een glasreinigingsmiddel gebruiken.
L300/L300D-serie Warmteverspreiding De CPU heeft een interne temperatuursensor ter bescherming tegen oververhitting. Als de interne temperatuur van de een bepaald niveau bereikt, wordt de ventilator ingeschakeld of wordt de CPUverwerkingssnelheid verlaagd. U kunt opgeven of u de CPU-temperatuur wilt regelen door eerst de ventilator aan te zetten en dan zo nodig de CPU-verwerkingssnelheid te verlagen, of vice versa.
L300/L300D-serie 4-36 Gebruikershandleiding
L300/L300D-serie Hoofdstuk 5 Het toetsenbord Het toetsenbord van de computer is compatibel met een uitgebreid toetsenbord met 104/105 toetsen. Door de FN-toets tegelijkertijd met andere toetsen in te drukken, kunt u alle functies van het uitgebreide toetsenbord uitvoeren. Het aantal toetsen op uw toetsenbord is afhankelijk van de toetsenbordindeling waarmee uw computer is geconfigureerd. Er zijn toetsenborden voor verschillende talen beschikbaar.
L300/L300D-serie Functietoetsen: F1 ... F12 De functietoetsen, niet te verwarren met de FN-toets, zijn de twaalf toetsen boven aan het toetsenbord. Deze toetsen zijn donkergrijs, maar werken anders dan de andere donkergrijze toetsen. F1 tot en met F12 worden functietoetsen genoemd, omdat u hiermee geprogrammeerde functies kunt uitvoeren. Als u toetsen met een pictogram gebruikt in combinatie met de FN-toets gebruikt, worden specifieke functies op de computer uitgevoerd.
L300/L300D-serie Druk op FN + F12 (Scroll Lock) om de cursor op een bepaalde regel te vergrendelen. Bij het opstarten is deze functie standaard uitgeschakeld. Met FN + ENTER emuleert u de ENTER-toets op het numerieke toetsenblok van het uitgebreide toetsenbord. Met FN + CTRL emuleert u de rechter CTRL-toets van het uitgebreide toetsenbord. Met FN + ALT emuleert u de rechter ALT-toets van het uitgebreide toetsenbord.
L300/L300D-serie Slaapstand: Druk op FN + F3 om over te schakelen naar de slaapstand. Sluimerstand: Druk op FN + F4 om over te schakelen naar de sluimerstand. Uitvoer: Met FN + F5 wijzigt u het actieve beeldscherm. Helderheid verlagen: Als u op FN + F6 drukt, wordt de helderheid van het computerscherm stapsgewijs verlaagd. Helderheid verhogen: Als u op FN + F drukt, wordt de helderheid van het computerscherm stapsgewijs verhoogd.
L300/L300D-serie TOSHIBA Hulpprogramma Zoom (verkleinen): Als u op FN +1 drukt, worden pictogrammen op het bureaublad of de tekengrootte binnen een van de ondersteunde toepassingsvensters verkleind. TOSHIBA Hulpprogramma Zoom (vergroten): Als u op FN + 2 drukt, worden pictogrammen op het bureaublad of de tekengrootte binnen een van de ondersteunde toepassingsvensters vergroot.
L300/L300D-serie Geïntegreerde numerieke toetsen Het toetsenbord van uw computer heeft geen apart numeriek toetsenbord maar geïntegreerde numerieke toetsen met dezelfde functies. Deze bevinden zich in het midden van het toetsenbord en de betreffende toetsen hebben donkergrijze letters aan de voorrand. Deze toetsen hebben dezelfde functie als de numerieke toetsenbloktoetsen van het uitgebreide standaardtoetsenbord met 101/102 toetsen.
L300/L300D-serie Tijdelijk het gewone toetsenbord gebruiken (geïntegreerde numerieke toetsen aan) Tijdens het gebruik van de geïntegreerde numerieke toetsen kunt u tijdelijk met het gewone toetsenbord werken zonder de geïntegreerde numerieke toetsen uit te schakelen: 1. Houd FN ingedrukt en druk op een andere toets. Alle toetsen werken alsof de geïntegreerde numerieke toetsen zijn uitgeschakeld. 2. U typt hoofdletters door FN + SHIFT ingedrukt te houden en op een lettertoets te drukken. 3.
L300/L300D-serie ASCII-tekens genereren Niet alle ASCII-tekens kunnen via het gewone toetsenbord worden gegenereerd. U kunt deze tekens echter door middel van hun ASCII-codes genereren. Voer de volgende stappen uit met de geïntegreerde numerieke toetsen ingeschakeld: 1. Houd ALT ingedrukt. 2. Typ de ASCII-code met behulp van de geïntegreerde numerieke toetsen. 3. Laat ALT los. Het ASCII-teken verschijnt op het scherm.
L300/L300D-serie Hoofdstuk 6 Stroomvoorziening en spaarstanden De computer kan via de netadapter of via de interne accu van stroom worden voorzien. In dit hoofdstuk leest u hoe u deze energiebronnen optimaal gebruikt en hoe u de accu oplaadt en vervangt. Verder worden tips gegeven voor het besparen van accu-energie en krijgt u informatie over spaarstanden.
L300/L300D-serie Stroom ingeschakeld Netadapter niet aangesloten Acculading is boven activeringsniveau lage acculading • In werking • Lampje: Accu uit DC IN uit Acculading is onder activeringsniveau lage acculading • In werking • Lampje: Accu knippert oranje DC IN uit Accu is leeg Computer wordt in sluimerstand gezet of afgesloten (afhankelijk van de instelling in het hulpprogramma Toshiba Energiebeheer) Geen accu geïnstalleerd • Buiten werking • Lampje: Accu uit DC IN uit Stroom uitgeschakeld (bu
L300/L300D-serie DC IN-lampje Aan de hand van het DC IN-lampje kunt u de stroomvoorzieningsstatus voor de aangesloten netadapter controleren. Groen Geeft aan dat de netadapter is aangesloten en de computer van stroom voorziet. Lampje brandt niet In alle andere omstandigheden is het lampje uit. Aan/uit-lampje Controleer het aan/uit-lampje om de status van de accu-eenheid te bepalen. Let daarbij op de volgende indicaties: Groen Geeft aan dat de computer van stroom wordt voorzien en is ingeschakeld.
L300/L300D-serie Wanneer de computer wordt uitgeschakeld in de sluimerstand of de slaapstand en de netadapter niet is aangesloten, levert de accu-eenheid stroom, zodat de gegevens en programma’s in het geheugen behouden blijven. Als de accu-eenheid leeg is, functioneren de sluimerstand en de slaapstand niet en gaan alle gegevens in het geheugen verloren. In dat geval ziet u het volgende bericht wanneer u de computer weer inschakelt: De firmware heeft vastgesteld dat er een CMOS-accufout is opgetreden.
L300/L300D-serie Onderhoud en gebruik van de accu-eenheid De accu-eenheid is een essentieel onderdeel van de draagbare computer. Door de eenheid naar behoren te gebruiken en te onderhouden zorgt u ervoor dat deze langer stroom levert en langer meegaat. Volg de aanwijzingen in dit gedeelte zorgvuldig ter waarborging van veilig gebruik en maximale prestaties. Voorzorgsmaatregelen Verkeerde behandeling van accu’s kan resulteren in ernstig of dodelijk letsel of materiële schade.
L300/L300D-serie 7. Stel een accu-eenheid nooit bloot aan warmte door deze bijvoorbeeld in de buurt van een radiator op te bergen. Door blootstelling aan warmte kan de accu-eenheid vlam vatten, ontploffen of lek raken, en zodoende ernstig of dodelijk letsel teweegbrengen. Verder kan de eenheid bij blootstelling aan warmte defect raken, waardoor gegevens verloren kunnen gaan. 8. Stel de accu-eenheid nooit bloot aan abnormale schokken, trillingen of druk.
L300/L300D-serie 3. Gebruik alleen accu-eenheden die door TOSHIBA zijn aanbevolen. 4. Controleer altijd of de accu-eenheid correct is geïnstalleerd en stevig vastzit. Is dit niet het geval, dan kan de accu-eenheid uit de computer vallen en letsel teweegbrengen. 5.
L300/L300D-serie De accu opladen Als de lading in de accu-eenheid opraakt, knippert het acculampje oranje om aan te geven dat er slechts acculading voor enkele minuten resteert. Als u de computer blijft gebruiken terwijl het acculampje knippert, wordt de slaapstand geactiveerd (zodat u geen gegevens verliest) en wordt de computer automatisch afgesloten. De sluimerstand wordt alleen geactiveerd als deze optie is ingeschakeld op het tabblad Sluimerstand van Energiebeheer.
L300/L300D-serie Accuaanwijzingen over opladen In de volgende omstandigheden kan het gebeuren dat de accu niet direct wordt opgeladen: ■ De accu is extreem heet of koud. Bij extreem hoge temperaturen kan het gebeuren dat de accu in het geheel niet wordt opgeladen. Om te zorgen dat de accu maximaal wordt opgeladen, dient u deze op te laden bij een kamertemperatuur van 10 C tot 30 C. ■ De accu is praktisch leeg. Laat de netadapter enkele minuten aangesloten; hierna begint het opladen.
L300/L300D-serie Gebruiksduur van de accu maximaliseren De bruikbaarheid van een accu is afhankelijk van de gebruiksduur die één acculading levert. Hoe lang de lading van een accu meegaat, hangt af van de volgende factoren: ■ de configuratie van de computer (of u bijvoorbeeld energiebesparingsopties hebt geactiveerd). In Energiebeheer kunt u een modus voor het besparen van accu-energie instellen.
L300/L300D-serie Gegevens behouden bij uitschakelen van computer Als u de computer uitschakelt terwijl de accu en RTC-batterij volledig zijn opgeladen, zorgen de accu en batterij dat gegevens gedurende de volgende tijdsperiodes behouden blijven.
L300/L300D-serie De accu-eenheid vervangen Als de accu-eenheid volledig versleten is, moet u een nieuwe eenheid installeren. Als het acculampje kort na het opladen van de accu oranje knippert, betekent dit dat de accu-eenheid versleten is en dat u een nieuwe accu moet installeren. U kunt een lege accu-eenheid ook vervangen door een reserve-accu als u de computer niet op het elektriciteitsnet hebt aangesloten. In deze paragraaf wordt uitgelegd hoe u accu-eenheden verwijdert en installeert.
L300/L300D-serie 6. Duw de accu-ontgrendelingsschuif opzij om de accu-eenheid vrij te geven en verwijder de accu-eenheid. Accu-eenheid Afbeelding 6-2 De accu-eenheid verwijderen 7. Trek de accu-eenheid naar voren en verwijder de eenheid uit de computer. Met het oog op het milieu dient u gebruikte accu-eenheden niet weg te gooien. Retourneer gebruikte accu-eenheden naar uw TOSHIBA-dealer. De accu-eenheid installeren Voer de volgende stappen uit om een accu te installeren.
L300/L300D-serie De computer opstarten met een wachtwoord Als u al een wachtwoord hebt geregistreerd, voert u het wachtwoord handmatig in om de computer te starten. Voer de volgende stappen uit om de computer op te starten met het gebruikerswachtwoord: 1. Schakel de computer in volgens de instructies in hoofdstuk 3, Voor u begint. Het volgende bericht verschijnt. Voer het huidige wachtwoord in Op dit punt werken de sneltoetsen FN + F1 tot en met F9 niet.
L300/L300D-serie In-/uitschakelen via LCD U kunt de computer zo instellen dat de stroom automatisch wordt uitgeschakeld als u het LCD-scherm sluit. Als u het scherm opent, wordt de computer aangezet als deze in de slaapstand of de sluimerstand staat, maar niet in de opstartmodus. Als de functie Uitschakelen via LCD is geactiveerd en u Windows afsluiten gebruikt, dient u het scherm niet te sluiten voordat de afsluitfunctie is voltooid.
L300/L300D-serie 6-16 Gebruikershandleiding
L300/L300D-serie Hoofdstuk 7 HW Setup en wachtwoorden In dit hoofdstuk wordt uitgelegd hoe u de computer met behulp van het programma TOSHIBA HW Setup configureert en hoe u wachtwoorden instelt. HW Setup Met TOSHIBA HW Setup kunt u instellingen configureren voor Algemeen, Wachtwoord, Beeldscherm, CPU, Opstartprioriteit, Toetsenbord, USB, LAN en Lampjes.
L300/L300D-serie Algemeen Dit venster geeft de BIOS-versie weer en heeft twee knoppen: Standaard en Info. Standaard De fabrieksinstellingen van alle HW Setup-opties herstellen. Info Versiegegevens van HW Setup weergeven. Instellen Dit veld toont de BIOS-versie met de datum. Wachtwoord Gebruikerswachtwoord Met deze optie kunt u het gebruikerswachtwoord voor opstarten instellen of wijzigen. Niet geregistreerd Het wachtwoord wijzigen of verwijderen.
L300/L300D-serie 3. Klik op OK. Als de ingevoerde tekenreeks overeenkomt met het geregistreerde wachtwoord, wordt de wachtwoordoptie opnieuw ingesteld en ziet u het volgende bericht: Niet geregistreerd Als u twee verschillende reeksen hebt ingevoerd, verschijnt het volgende bericht. In dat geval moet u de procedure herhalen vanaf stap 1. Incorrect wachtwoord Als u het wachtwoord driemaal achtereen onjuist invoert, wordt de computer afgesloten.
L300/L300D-serie Opstartprioriteit Opstartprioriteitsopties Hier kunt u de prioriteit voor het opstarten van de computer instellen. De volgende instellingen voor de opstartprioriteit zijn beschikbaar. U kunt de instellingen annuleren en handmatig een opstartapparaat selecteren door tijdens het opstarten van de computer op een van de volgende toetsen te drukken: U Selecteert het USB-diskettestation. N Selecteert het netwerk. 1 Selecteert de primaire vaste schijf. C Selecteert het CD-ROM-station*.
L300/L300D-serie Toetsenbord Activering op toetsenbord Als deze functie actief is en de computer zich in de slaapstand bevindt, kunt u de computer inschakelen door op een willekeurige toets te drukken. De functie is alleen van toepassing op het interne toetsenbord en werkt alleen wanneer de computer zich in de slaapstand bevindt. Ingeschakeld Schakelt Activering op toetsenbord in. Uitgeschakeld Activering op toetsenbord wordt uitgeschakeld.
L300/L300D-serie 7-6 Gebruikershandleiding
L300/L300D-serie Hoofdstuk 8 Optionele apparaten Optionele apparaten kunnen de mogelijkheden en de veelzijdigheid van de computer uitbreiden.
L300/L300D-serie PC-kaart/ExpressCard Een PC-kaart/ExpressCard installeren De PC-kaar/ExpressCard-tsleuf bevindt zich aan de linkerkant van de computer. U kunt één PC-kaart/ExpressCard in de sleuf installeren. De Windows-voorziening voor directe installatie (’hot install’) maakt het mogelijk om een PC-kaart/ExpressCard te installeren terwijl de computer is ingeschakeld. Installeer geen PC-kaart/ExpressCard wanneer de computer in de slaapstand of de sluimerstand staat.
L300/L300D-serie Een PC-kaart/ExpressCard verwijderen Voer de volgende stappen uit om de PC-kaart/ExpressCard te verwijderen. 1. In Windows Vista™ klikt u op het pictogram Hardware veilig verwijderen in het systeemvak en schakelt u de PC-kaart/ ExpressCard uit. 2. Druk licht op de uitwerpknop, zodat de PC-kaart/ExpressCard naar voren komt. 3. Trek de PC-kaart/ExpressCard uit de sleuf.
L300/L300D-serie Een SD-/SDHC-/MS-/MS Pro-/MMC-kaart installeren Voer de volgende stappen uit om een geheugenkaart te installeren. 1. Plaats de geheugenkaart in de sleuf. 2. Druk voorzichtig totdat de kaart vastzit. Sleuf voor meerdere digitale mediakaarten SD-/SDHC-/MS-/MS Pro-/MMC-kaart* *De vorm van de kaart hangt af van de kaart die u hebt gekocht. Afbeelding 8-3 De geheugenkaart plaatsen ■ Zorg dat er geen voorwerpen in de kaartsleuf terechtkomen.
L300/L300D-serie Een SD-/SDHC-/MS-/MS Pro-/MMC-kaart verwijderen Voer de volgende stappen uit om de geheugenkaart te verwijderen. 1. In Windows Vista™ opent u het pictogram Hardware veilig verwijderen in het systeemvak en schakelt u de geïnstalleerde geheugenkaart uit. 2. Druk zachtjes op de geheugenkaart in de sleuf om deze uit te werpen. 3. De kaart komt een stukje naar buiten, zodat u deze kunt verwijderen.
L300/L300D-serie Geheugenuitbreiding U kunt het RAM van de computer uitbreiden door extra geheugen in de geheugenmodule te installeren. Een geheugenmodule installeren Voer de volgende stappen uit om een geheugenmodule te installeren: 1. Schakel de computer uit in de opstartmodus. Raadpleeg de paragraaf De computer uitschakelen in hoofdstuk 3. ■ Bij langdurig computergebruik worden de geheugenmodules heet. Laat de geheugenmodules in dat geval afkoelen tot kamertemperatuur alvorens de modules te vervangen.
L300/L300D-serie 6. Steek de geheugenmodule in de connector op de computer. Duw stevig en voorzichtig tot de module goed vastzit. 7. Duw de module omlaag tot deze plat ligt en de twee klemmetjes vastzitten. Raak de connectoren op de geheugenmodule en op de computer niet aan. Vuil op de connectoren kan problemen met de toegang tot het geheugen veroorzaken. Afbeelding 8-6 De geheugenmodule plaatsen Afbeelding 8-7 De geheugenmodule omlaagduwen 8.
L300/L300D-serie Een geheugenmodule verwijderen Als u de geheugenmodule wilt verwijderen, zorgt u dat de computer in de opstartmodus is en voert u de volgende stappen uit: 1. Schakel de computer uit en verwijder alle kabels die op de computer zijn aangesloten. ■ Bij langdurig computergebruik worden de geheugenmodules heet. Laat de geheugenmodules in dat geval afkoelen tot kamertemperatuur alvorens de modules te vervangen.
L300/L300D-serie Extra accu-eenheid (3 cellen, 6 cellen en 9 cellen) U kunt de draagbaarheid van de computer verbeteren met extra accu-eenheden (3 cellen: PA3533U-1BRS/PA3533U-1BAS, 6 cellen: PA3534U-1BRS/PA3534U-1BAS, 9 cellen: PA3535U-1BRS/ PA3535U-1BAS). Als er geen stopcontact in de buurt is, kunt u een lege accu vervangen door een volle. Zie hoofdstuk 6, Stroomvoorziening en spaarstanden.
L300/L300D-serie Als u de optie LCD+analoge RGB selecteert in de opties voor Beeldscherm in HW Setup, worden zowel de externe monitor als het interne LCD-scherm geactiveerd zodra u de computer inschakelt. Als u Autom. geselecteerd hebt gekozen, dan is alleen de externe monitor actief. Als u de beeldscherminstellingen wilt wijzigen, drukt u op FN + F5. Indien u de monitor loskoppelt alvorens de computer uit te schakelen, dient u op FN + F5 te drukken om over te schakelen naar het interne beeldscherm.
L300/L300D-serie Instelling voor beeldweergave op HDMI Als u beelden op een HDMI-apparaat wilt weergeven, dient u de volgende instellingen te configureren. Als u dit niet doet, wordt er mogelijk niets weergegeven. ■ Gebruik vóór u met afspelen begint de sneltoets FN + F5 om het weergaveapparaat te selecteren. Kies tijdens het afspelen geen ander weergaveapparaat. ■ Kies geen ander weergaveapparaat in de volgende situaties: Terwijl er gegevens worden gelezen of weggeschreven.
L300/L300D-serie Beveiligingsslot Met het beveiligingsslot kunt u de computer aan een bureau of ander groot voorwerp verankeren om te voorkomen dat de computer door onbevoegden wordt verwijderd. Aan de rechterkant van de computer bevindt zich een sleuf voor het beveiligingsslot. Bevestig één uiteinde van een kabel aan het bureau en het andere uiteinde aan de sleuf voor het beveiligingsslot.
L300/L300D-serie Hoofdstuk 9 Problemen oplossen TOSHIBA-computers hebben een duurzaam ontwerp. Mochten er echter problemen optreden, dan kunt u aan de hand van de procedures in dit hoofdstuk bepalen wat er aan de hand is. Alle gebruikers dienen dit hoofdstuk te lezen. Als u weet wat er fout kan gaan, kunt u bepaalde problemen wellicht vermijden.
L300/L300D-serie ■ Controleer alle verbindingskabels op losse draden en alle connectoren op losse pinnen. ■ Controleer of de diskette correct in het station is geplaatst en of het schrijfbeveiligingsschuifje van de diskette in de juiste stand is gezet. Maak notities van uw waarnemingen in een permanent foutenlogboek. Hierdoor kunt u gemakkelijker aan uw leverancier uitleggen wat de problemen zijn.
L300/L300D-serie Controlelijst voor hardware en systeem In dit gedeelte wordt ingegaan op problemen die worden veroorzaakt door de computerhardware of de aangesloten randapparaten.
L300/L300D-serie Aan/uit Als de computer niet op de netadapter is aangesloten, is de accu-eenheid de voornaamste voedingsbron. De computer heeft echter een aantal andere voedingsbronnen, zoals de intelligente stroomvoorziening en de RTC-batterij. Deze bronnen staan met elkaar in verband en kunnen elk ten grondslag liggen aan schijnbare stroomvoorzieningsproblemen. Deze paragraaf bevat controlelijsten voor de netadapter en de hoofdaccu.
L300/L300D-serie Accu Als u een probleem met de accu vermoedt, controleert u het DC IN-lampje en het acculampje. Raadpleeg hoofdstuk 6, Stroomvoorziening en spaarstanden voor informatie over de lampjes en de werking van de accu. Probleem Procedure Accu voorziet de computer niet van stroom De accu is misschien leeg. Sluit de adapter aan om de accu op te laden. Accu wordt niet opgeladen wanneer de netadapter is aangesloten (acculampje brandt niet oranje).
L300/L300D-serie Wachtwoord Probleem Procedure U kunt geen wachtwoord invoeren Raadpleeg de paragraaf Wachtwoord in hoofdstuk 7, HW Setup en wachtwoorden. Toetsenbord Toetsenbordproblemen kunnen worden veroorzaakt door de computerconfiguratie. Raadpleeg hoofdstuk 5, Het toetsenbord, en hoofdstuk 7, HW Setup en wachtwoorden voor meer informatie. Probleem Procedure Sommige lettertoetsen produceren cijfers Controleer of de geïntegreerde numerieke toetsen zijn geselecteerd.
L300/L300D-serie Probleem Procedure De zojuist genoemde problemen houden aan of er treden andere problemen op. Raadpleeg de documentatie bij de software om te bepalen of het probleem wordt veroorzaakt door de software. Neem contact op met uw leverancier als de problemen aanhouden. Vaste schijf Probleem Procedure Computer wordt niet opgestart vanaf de vaste schijf. Controleer of het diskettestation een diskette bevat of dat het optische station een CD/DVD/ HD DVD bevat.
L300/L300D-serie DVD Super Multi-station (±R DL) Raadpleeg hoofdstuk 4, Basisbeginselen voor meer informatie. Probleem Procedure Controleer of de stationslade goed dicht zit. Duw U kunt geen toegang krijgen tot een CD/DVD zachtjes totdat de lade vastklikt. in het station. Open de lade en controleer of de CD/DVD goed ligt: plat op het ladeoppervlak met het opschrift omhoog. Een voorwerp in de lade kan verhinderen dat de CD of DVD wordt gelezen. Zorg dat de laser niet wordt geblokkeerd.
L300/L300D-serie Probleem Procedure Kan niet goed schrijven. Indien er problemen zijn met schrijven, controleert u of u de volgende voorschriften in acht hebt genomen: ■ Gebruik alleen schijven die door TOSHIBA zijn aanbevolen. ■ Gebruik het aanwijsapparaat of toetsenbord niet tijdens het schrijven. ■ Gebruik alleen de software die bij de computer is geleverd voor het opnemen van gegevens. ■ Gebruik of start geen andere software tijdens het schrijven. ■ Stoot niet tegen de computer tijdens het schrijven.
L300/L300D-serie Probleem Procedure Sommige CD’s/DVD’s/ HD DVD’s worden correct uitgevoerd, maar andere niet. Het probleem kan worden veroorzaakt door de software- of hardwareconfiguratie. Controleer of de hardwareconfiguratie juist is voor de software. Raadpleeg de documentatie bij de CD/DVD/HD DVD. Controleer welk type CD/DVD/HD DVD u gebruikt. Raadpleeg hoofdstuk 1, Inleiding, voor meer informatie. Controleer de regiocode op de DVD. Deze moet overeenkomen met de regiocode op het station.
L300/L300D-serie Diskettestation Probleem Procedure Station werkt niet. Misschien is de kabel tussen de computer en het station niet goed bevestigd. Controleer of deze kabel correct is aangesloten. Sommige programma’s Het probleem kan worden veroorzaakt door de software- of hardwareconfiguratie. Controleer of worden correct uitgevoerd, maar de hardwareconfiguratie juist is voor de software. andere niet. U kunt niet lezen van of Probeer een andere diskette.
L300/L300D-serie Probleem Procedure Het touchpad reageert te sterk of slecht Wijzig de gevoeligheid van het touchpad. 1. Open het Configuratiescherm. 2. Klik op het pictogram Printers en vervolgens op het pictogram Andere hardware. 3. Klik op het pictogram Muis. 4. Klik op de tab Apparaatinstelling. 5. Klik op de knop Instelling. 6. Het eigenschappenvenster van het Synaptics-touchpad op de PS/2-poort wordt geopend.
L300/L300D-serie Probleem Procedure Schermaanwijzer wordt Wijzig de snelheid van de aanwijzer in het hulpprogramma voor muisbesturing. te snel of te traag verplaatst. 1. Open het Configuratiescherm, selecteer het pictogram Muis en druk op ENTER. 2. Klik op de tab Aanwijzeropties. 3. Stel de snelheid van de aanwijzer in conform de aanwijzingen en klik op OK. U kunt de muisaanwijzer niet normaal verplaatsen. Misschien is de muis vuil. Raadpleeg de documentatie bij de muis voor informatie over schoonmaken.
L300/L300D-serie Externe monitor Raadpleeg ook hoofdstuk 8, Optionele apparaten en de documentatie bij uw monitor. Probleem Procedure Monitor kan niet worden Controleer of de aan/uit-schakelaar van de ingeschakeld externe monitor op aan staat. Controleer of het netsnoer van de externe monitor op een werkend stopcontact is aangesloten. Het scherm blijft leeg. Pas het contrast en de helderheid op de externe monitor aan.
L300/L300D-serie USB Raadpleeg tevens de documentatie bij uw USB-apparaat. Probleem Procedure USB-apparaat werkt niet. Controleer of de kabelverbinding tussen de USB-poorten op de computer en het USBapparaat in orde is. Controleer of de USB-apparaatstuurprogramma’s correct zijn geïnstalleerd. Raadpleeg de Windows-documentatie voor informatie over het controleren van de stuurprogramma’s. Als uw besturingssysteem geen USB ondersteunt, kunt u toch een USB-muis en/of USB-toetsenbord gebruiken.
L300/L300D-serie Probleem Procedure Het bericht CONNECT Controleer de instelling voor foutcontrole (Error wordt snel opgevolgd control) in de communicatietoepassing. door NO CARRIER U kunt tevens de opdracht AT\N gebruiken. Verstoorde tekenweergave tijdens communicatie. Controleer of de instellingen voor het pariteitsbit en het stopbit (voor gegevensoverdracht) corresponderen met die van de andere computer. Controleer de transportbesturing (flow control) en het communicatieprotocol.
L300/L300D-serie Draadloos LAN Als u na het uitvoeren van de volgende procedure nog steeds geen toegang tot het LAN hebt, neemt u contact op met de netwerkbeheerder. Voor meer informatie over draadloze communicatie raadpleegt u hoofdstuk 4, Basisbeginselen. Probleem Procedure Kan geen toegang krijgen tot draadloos LAN. Controleer of de schakelaar voor draadloze communicatie van de computer op aan staat. Als de problemen aanhouden, raadpleegt u de LAN-beheerder.
L300/L300D-serie TOSHIBA-ondersteuning Als u extra technische hulp nodig hebt of als u problemen hebt bij het gebruik van de computer, kunt u contact opnemen met TOSHIBA. Voordat u opbelt Aangezien sommige problemen wellicht te wijten zijn aan het besturingssysteem of het programma dat u gebruikt, is het belangrijk om eerst andere hulpbronnen te raadplegen.
L300/L300D-serie Hoofdstuk 10 Vrijwaringsverklaringen In dit hoofdstuk vindt u informatie over de vrijwaringsverklaringen met betrekking tot TOSHIBA-computers.
L300/L300D-serie In bepaalde omstandigheden kan het gebeuren dat de computer wordt uitgeschakeld. Dit is een normale beschermende maatregel ter voorkoming van gegevensverlies of beschadiging van het product bij gebruik buiten de aanbevolen omstandigheden. Vermijd het risico van gegevensverlies door altijd back-ups van gegevens te maken. Dit doet u door de gegevens van tijd tot tijd op een extern opslagmedium op te slaan.
L300/L300D-serie Gebruiksduur van de accu De gebruiksduur van de accu varieert sterk al naar gelang factoren zoals productmodel, configuratie, toepassingen, energiebeheerinstellingen en gebruikte functies. Bovendien is de gebruiksduur onderhevig aan de natuurlijke prestatievariaties die voortvloeien uit het ontwerp van afzonderlijke onderdelen.
L300/L300D-serie Draadloos LAN De verzendsnelheid via het draadloos LAN en het maximale bereik van draadloos LAN kunnen variëren al naar gelang de elektromagnetische omgeving, obstakels, ontwerp en configuratie van toegangspunten, clientontwerp en software-/hardwareconfiguratie. De werkelijke verzendsnelheid zal lager zijn dan de theoretische maximumsnelheid.
L300/L300D-serie Bijlage A Specificaties Deze bijlage geeft een overzicht van de technische kenmerken van de computer. Werkomgeving In werking Niet in werking Omgevingstemperatuur 5 °C tot 35 °C -20 °C tot 60 °C Relatieve vochtigheid 20% tot 80% 10% tot 90% Hoogte (vanaf zeeniveau) 0 tot 3.000 meter 0 tot 10.
L300/L300D-serie Ingebouwde modem De beschikbaarheid van deze functie is afhankelijk van het aangeschafte model. Network control unit (NCU) Type NCU AA Type lijn Telefoonlijn (alleen analoog) Keuzesysteem Puls Toon Besturingsopdracht AT-opdrachten EIA-578-opdrachten Controlefunctie Computerluidspreker Communicatiespecificaties A-2 Communicatiesysteem Data: Fax: Full duplex Half duplex Communicatieprotocol Data ITU-T-Rec (voorheen CCITT) Bell Fax ITU-T-Rec (voorheen CCITT) V.21/V.22/V.
L300/L300D-serie Bijlage B Beeldschermcontroller en videomodi Beeldschermcontroller De beeldschermcontroller zet software-opdrachten om in hardwareopdrachten die bepaalde pixels in- of uitschakelen. De controller is een geavanceerde VGA (Video Graphics Array)-kaart die SVGA (Super VGA) en XGA (Extended Graphics Array) ondersteunt voor het interne LCD-scherm en externe monitors.
L300/L300D-serie Videomodi De computer ondersteunt de videomodi die zijn gedefinieerd in de volgende tabel. Als uw toepassing de keuze biedt uit een aantal modusnummers die niet overeenstemmen met de nummers in de tabel, selecteert u een modus op basis van resolutie, aantal kleuren en verversingsfrequenties.
L300/L300D-serie Bijlage C Draadloos LAN Aan de hand van deze bijlage kunt u het draadloze LAN met een minimum aan parameters in bedrijf stellen. Kaartspecificaties Model ■ Minikaart Compatibiliteit ■ IEEE 802.11-norm voor draadloze LAN’s ■ Wi-Fi (Wireless Fidelity), gecertificeerd door de Wi-Fi Alliance. Het logo ’Wi-Fi certified’ is een keurmerk van de Wi-Fi Alliance.
L300/L300D-serie Radiospecificaties De radiospecificaties van Wireless LAN-kaarten kunnen variëren per: ■ land/regio waarin het product is aangeschaft ■ type product Draadloze communicatie is vaak gebonden aan plaatselijke voorschriften voor radiocommunicatie.
L300/L300D-serie Ondersteunde subfrequenties Afhankelijk van de radiovoorschriften die in uw land/regio van kracht zijn, is het mogelijk dat uw draadloze LAN-kaart een afwijkende groep 5-GHz/2,4-GHz kanalen ondersteunt. Neem contact op met een bevoegd Wireless LAN- of TOSHIBA-dealer voor informatie over de radiovoorschriften die in uw land/regio van kracht zijn. Tabel Wireless IEEE 802.
L300/L300D-serie Tabel Wireless IEEE 802.
L300/L300D-serie Bijlage D Netsnoer en connectoren De stekker van het netsnoer moet compatibel zijn met verschillende internationele stopcontacten.
L300/L300D-serie Voor de Verenigde Staten en Canada moeten tweepins stekkers de configuratie 2-15P (250 V) of 1-15P (125 V) hebben, en driepins stekkers de configuratie 6-15P (250V) of 5-15P (125V), conform het U.S. National Electrical Code Handbook en de Canadian Electrical Code Part II. De volgende afbeeldingen tonen de stekkervormen voor de V.S., Australië, Canada, Verenigd Koninkrijk, Europa en China. Verenigd Koninkrijk V.S.
L300/L300D-serie Bijlage E Als uw computer wordt gestolen Ga verantwoord met uw computer om en probeer diefstal te voorkomen. U bent de eigenaar van een waardevol apparaat dat zeer aantrekkelijk is voor dieven: laat het dus nooit onbeheerd achter. Extra bescherming tegen diefstal is verkrijgbaar in de vorm van beveiligingskabels, waarmee u de notebook thuis of op kantoor aan een zwaar voorwerp kunt verankeren.
L300/L300D-serie Volg deze procedures om de diefstal online te registreren: ■ Ga naar www.toshiba-europe.com op internet. Kies in de lijst met productcategorieën Computer Systems. ■ Open het menu Support & Downloads en kies de optie Stolen units database. De gegevens die u invoert, worden in onze servicecenters gebruikt om uw computer op te sporen. TOSHIBA-diefstalregistratie Aan: Faxnummer: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
L300/L300D-serie Woordenlijst In deze woordenlijst worden onderwerpen toegelicht die verband houden met deze handleiding. Alternatieve benamingen zijn ter referentie opgenomen.
L300/L300D-serie HDD: Hard Disk Drive (vasteschijfstation) IDE: Integrated Drive Electronics I/O: Input/Output (invoer/uitvoer) IrDA: Infrared Data Association IRQ: Interrupt Request (onderbrekingsinstructie) KB: Kilobyte LCD: Liquid Crystal Display LED: Light Emitting Diode (lampje) LSI: Large Scale Integration (grootschalige integratie) MB: Megabyte OCR: Optical Character Recognition (optische tekenherkenning) PCB: Printed Circuit Board (printplaat) PCI: Peripheral Component Interconnect RAM: Random Acce
L300/L300D-serie analoog signaal: een signaal waarvan de kenmerken, zoals amplitude en frequentie, evenredig variëren met (analoog zijn met) de te verzenden waarde. In spraakcommunicatie worden analoge signalen gebruikt. ANSI: American National Standards Institute. Een organisatie die normen voor een aantal technische sectoren definieert. Zo heeft ANSI de ASCII-standaard en andere informatieverwerkingsvoorschriften gedefinieerd.
L300/L300D-serie BIOS: Basic Input Output System. De firmware die de gegevensstroom binnen de computer bestuurt. Zie ook firmware. bit: afgeleid van ’binary digit’ (binair cijfer), de basiseenheid van informatie die de computer gebruikt. Een bit kan de waarde 0 of 1 hebben. Acht bits vormen samen één byte. Zie ook byte. bps: bits per seconde. Meestal gebruikt ter aanduiding van de gegevensoverdrachtssnelheid van een modem.
L300/L300D-serie CMOS: Complementary Metal-Oxide Semiconductor. Een elektronische schakeling die op een stukje silicone is aangebracht en die heel weinig stroom nodig heeft. Geïntegreerde schakelingen die compatibel zijn met de CMOS-technologie, kunnen dicht bijeen worden geplaatst en zijn uiterst betrouwbaar. COM1, COM2, COM3 en COM4: de namen voor de seriële en communicatiepoorten.
L300/L300D-serie Digitale Audio: een norm voor audiocompressie die het mogelijk maakt geluidsbestanden optimaal over te dragen en real-time af te spelen. diskette: een verwisselbaar schijfje voor het opslaan van magnetisch gecodeerde gegevens. diskettestation: een elektromechanisch apparaat dat gegevens van een diskette leest en ernaar wegschrijft. documentatie: de handleidingen en/of andere schriftelijke instructies voor de gebruikers van een computersysteem of -toepassing.
L300/L300D-serie E echo: techniek waarbij ontvangen gegevens worden teruggezonden naar het apparaat van oorsprong. U kunt de informatie op het scherm weergeven, naar de printer sturen of beide. Wanneer een computer gegevens terugontvangt die het naar een CRT (of een ander randapparaat) heeft verzonden, en de gegevens vervolgens opnieuw verzendt naar de printer, wordt de CRT door de printer ’geëchood’.
L300/L300D-serie graphics: informatie in de vorm van tekeningen, figuren of andere beelden, zoals diagrammen of grafieken. H hardware: de fysieke elektronische en mechanische onderdelen van een computersysteem: meestal de computer zelf, externe schijfstations enzovoort. Zie ook software en firmware. hertz: een eenheid voor frequentie die overeenkomt met 1 cyclus per seconde. hexadecimaal: talstelsel met grondtal 16 dat bestaat uit de cijfers 0 tot en met 9 en de letters A, B, C, D, E en F.
L300/L300D-serie IrDA 1.1: een industriestandaard voor gegevensoverdracht die voorziet in draadloze seriële infraroodtransmissie met een snelheid van maximaal 4 Mbps. J jumper: een klein klemmetje of draadje waarmee twee punten van een schakeling kunnen worden verbonden om hardwarekenmerken te wijzigen. K k: afkorting van het Griekse woord kilo, dat 1000 betekent; vaak gebruikt als equivalent van 1024, ofwel 2 tot de tiende macht. Zie ook byte en kilobyte. kaart: een printplaat.
L300/L300D-serie megahertz: een eenheid voor frequentie die overeenkomt met 1 miljoen cycli per seconde. Zie ook hertz. menu: een software-interface die een lijst met opties op het scherm weergeeft. Ook wel scherm genoemd. microprocessor: een geïntegreerde schakeling die instructies uitvoert; een van de belangrijkste hardwareonderdelen van de computer. Ook wel CPU of centrale verwerkingseenheid genoemd. modem: afgeleid van modulator/demodulator.
L300/L300D-serie opstartmodus: een programma dat de computer opstart of opnieuw opstart. Het programma laadt vanaf een opslagapparaat instructies in het computergeheugen. P PAL: PAL (Phase Alternating Line) is de meest verspreide beeld- en uitzendstandaard in Europa. pariteit: 1) de symmetrische verhouding tussen twee parameterwaarden (gehele getallen) die allebei hetzij aan of uit, hetzij even of oneven, hetzij 0 of 1 zijn.
L300/L300D-serie R RAM (Random Access Memory): snel geheugen in de computerschakelingen waaruit kan worden gelezen en waarnaar kan worden geschreven. randapparaat: een I/O-apparaat dat niet in de centrale processor en/of het hoofdgeheugen is geïntegreerd, bijvoorbeeld een printer of muis. RFI-afscherming (Radio Frequency Interference): een metalen afscherming rond de printplaten van de printer of computer ter voorkoming van radio- en TV-storing. Alle computerapparatuur genereert hoogfrequente signalen.
L300/L300D-serie seriële interface: heeft betrekking op een type gegevensuitwisseling waarbij informatie met één bit tegelijk wordt verzonden. SIO: Serial Input/Output. De elektronische methodologie die bij seriële gegevensoverdracht wordt gebruikt. sneltoets: een toetscombinatie van een bepaalde toets met de functietoets, FN, die kan worden gebruikt om systeemparameters, zoals het luidsprekervolume, in te stellen.
L300/L300D-serie TFT-beeldscherm: LCD-scherm met een reeks vloeibare-kristallencellen. Gebruikt actieve-matrixtechnologie met dunne-laagtransistors (TFT’s). toepassing: een reeks programma’s die gezamenlijk voor een specifieke taak worden gebruikt, zoals boekhouding, financiële planning, spreadsheets, tekstverwerking en games. toetsenbord: een invoerapparaat met schakelaars die worden geactiveerd door het indrukken van toetsen met opschriften.
L300/L300D-serie W wachtwoord: een unieke reeks tekens die ter identificatie van een specifieke gebruiker dient. De computer biedt verschillende niveaus van wachtwoordbeveiliging, zoals gebruiker, supervisor. warme start: een computer opnieuw opstarten zonder deze uit te schakelen. wissen: zie verwijderen.
L300/L300D-serie Woordenlijst-16 Gebruikershandleiding
L300/L300D-serie Index A Aan/uit, 1-7 slaapstand, 3-6 sluimerstand, 3-4 Aanwijsapparaat touchpad, 4-1 Accu bewaartijd, 6-11 capaciteit controleren, 6-9 gebruiksduur, 10-3 opladen, 6-8 RTC-batterij, 1-7, 6-4 typen, 6-3 Accu, Zie ook Accu-eenheid lampje, 2-9 Accu-eenheid, 1-7, 1-16, 6-3 energiebesparingsmodus, 1-11 extra, 8-9 gebruiksduur, 6-10 gebruiksduur verlengen, 6-11 lampje, 6-2 locatie, 2-5 problemen, 9-5 veiligheidsinstructies, -iii, 6-5 vervangen, -viii, 6-12 ASCII-tekens, 5-8 Automatisch inschakele
L300/L300D-serie E ExpressCard, 1-8 gebruik, 8-2 oververhitting, -xviii problemen, 9-13 Externe monitor, 8-9 controller en modi, B-1 HW Setup, 7-3 poort, 1-7 problemen, 9-14 F FN + 1 (TOSHIBA Hulpprogramma Zoom (verkleinen)), 5-5 FN + 2 (TOSHIBA Hulpprogramma Zoom (vergroten)), 5-5 FN + ALT (simulatie uitgebreid toetsenbord), 5-3 FN + CTRL (simulatie uitgebreid toetsenbord), 5-3 FN + ENTER, 5-3 FN + ESC (geluid dempen), 5-3 FN + F1 (vergrendelen), 5-3 FN + F12 (Scroll Lock), 5-3 FN + F2 (energiebeheersche
L300/L300D-serie L P Lampje aan/uit, 6-3 accu, 6-2 DC IN, 6-3 draadloze communicatie, 4-32 LAN, 4-33 Lampjes aan/uit, 2-9 accu, 2-9 LAN, 1-9, 4-32 kabeltypen, 4-33 lampje, 4-33 verbindingen maken, 4-33 verbindingen verbreken, 4-33 PC-kaart locatie van sleuven, 2-2 Poorten DC IN 19 V, 2-4 externe monitor, 1-7, 2-2 hoofdtelefoon, Zie Geluidssysteem LAN, 2-2 USB, 1-7, 2-2 Problemen accu, 9-5 controlelijst voor hardware en systeem, 9-3 diskettestation, 9-11 draadloos LAN, 9-17 DVD Super Multi (± R DL)-stati
L300/L300D-serie S T Schijflampje, 2-9 Slaapstand instellen, 3-6 problemen, 9-16 Sleuf voor meerdere digitale mediakaarten gebruik, 8-3 Slot, beveiliging, Zie Beveiligingsslot Sluimer-modus, 1-12 Sluimerstand, 1-12 instellen, 3-4 problemen, 9-16 Sneltoetsen, 1-10 draadloos, 5-4 energiebeheerschema, 5-3 geluid dempen, 5-3 helderheid verhogen, 5-4 helderheid verlagen, 5-4 slaapstand, 5-4 sluimerstand, 5-4 TOSHIBA Hulpprogramma Zoom (vergroten), 5-5 TOSHIBA Hulpprogramma Zoom (verkleinen), 5-5 touchpad, 5-4