Manual
Table Of Contents
- L40 Series
- Table of Contents
- Chapter 1: L40 Series Features
- Chapter 2: The Grand Tour
- Chapter 3: Getting Started
- Chapter 4: Basic Operations
- Using the TouchPad
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs on a CD-RW/DVD-ROM drive
- Writing CDs/DVDs on a DVD Super Multi drive supporting double layer disc recording
- When Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- Discs
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5: The Keyboard
- Chapter 6: Power and Power-Up Modes
- Chapter 7: Optional Devices
- Chapter 8: Troubleshooting
- Chapter 9: Disclaimers
- Appendix A: Specifications
- Appendix B: Display Modes
- Appendix C: AC Power Cord and Connectors
- Appendix D: If your computer is stolen
- Glossary
![](/manual/toshiba/equium-l40/manual-english/images/img-42.png)
User’s Manual 3-3
Getting Started
Turning on the power
This section describes how to turn on the power.
1. If a USB floppy disk drive is connected, make sure the drive is empty - if
a disk is in the drive, press the eject button to remove it.
2. Open the display panel.
3. Press the computer's power button and then release it.
Starting up for the first time
When you first turn on the power, the computer’s initial screen is the
Windows Vista™ Startup Screen Logo. Follow the on-screen directions for
each screen. During setup, you can click the Back button to return to the
previous screen.
Be sure to read the Windows Operating System End User License
Agreement carefully.
Use reasonable care when opening and closing the display panel. Opening
it vigorously or slamming it shut could damage the computer.
After you turn on the power for the first time, do not turn it off until you have
set up the operating system. Refer to the section Starting up for the first
time in this chapter.