Manual
Table Of Contents
- L40 Series
- Table of Contents
- Chapter 1: L40 Series Features
- Chapter 2: The Grand Tour
- Chapter 3: Getting Started
- Chapter 4: Basic Operations
- Using the TouchPad
- Using the internal modem
- LAN
- Wireless LAN
- Using optical disc drives
- Writing CDs on a CD-RW/DVD-ROM drive
- Writing CDs/DVDs on a DVD Super Multi drive supporting double layer disc recording
- When Using Ulead DVD MovieFactory® for TOSHIBA
- TOSHIBA Disc Creator
- Media Care
- Discs
- Setting up more than one display
- Cleaning the computer
- Moving the computer
- Chapter 5: The Keyboard
- Chapter 6: Power and Power-Up Modes
- Chapter 7: Optional Devices
- Chapter 8: Troubleshooting
- Chapter 9: Disclaimers
- Appendix A: Specifications
- Appendix B: Display Modes
- Appendix C: AC Power Cord and Connectors
- Appendix D: If your computer is stolen
- Glossary
User’s Manual 4-17
Basic Operations
■ When multiple drives that can write data to discs are connected, be
careful not to write to the wrong drive.
■ Be sure to connect the universal AC adapter before you write or rewrite.
■ Before you enter Sleep/Hibernation Mode, be sure to finish DVD-RAM
writing. Writing is finished if you can eject DVD-RAM media.
■ Be sure to close all other software programs except the writing
software.
■ Do not run software such as a screen saver, which can put a heavy load
on the CPU.
■ Operate the computer at full power. Do not use power-saving features.
■ Do not write while virus check software is running. Wait for it to finish,
then disable virus detection programs including any software that
checks files automatically in the background.
■ Do not use hard disk utilities, including those intended to enhance hard
disk access speed, as they may cause unstable operation and damage
data.
■ Write from the computer’s hard disk drive to the CD. Do not try to write
from shared devices such as a LAN server or any other network device.
■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD
MovieFactory
®
for TOSHIBA has not been confirmed. Therefore,
operation with other software cannot be guaranteed.
When writing or rewriting
Observe/consider the following when you write or rewrite to a CD-R/RW,
DVD-R/-RW/-RAM or DVD+R/+RW disc.
Do not perform any of the following actions when writing or rewriting:
■ Change users in the Windows Vista™ operating system.
■ Operate the computer for any other function, including using a mouse
or TouchPad or closing/opening the LCD panel.
■ Start a communication application such as a modem.
■ Apply impact or vibration to the computer.
■ Install, remove or connect external devices such as PC card, USB
devices, an external display, i.Link devices or optical digital devices.
■ Use the audio/video control button to reproduce music or voice.
■ Open the drive.
■ Do not use shut down/log off and Sleep/Hibernation while writing or
rewriting.
■ Make sure writing or rewriting is completed before going into Sleep/
hibernation. Writing is completed if you can open the drive tray.
■ Place the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
■ Keep mobile phones and other wireless communication devices away
from the computer.