Instruction Manual

User’s Manual 7-3
HW Setup
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
USB
Legacy USB Support
Use this option to enable or disable legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and floppy disk drive by setting the Legacy USB Support option to enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled Enables the Wake-up on Keyboard feature.
Disable Disables the Wake-up on Keyboard function
(Default).
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN (Default).
The Wake-up LAN function support AC adapter mode only, before you
plan to use this function please make sure your AC power source is
connected to system properly.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Enabled Enables Built-in LAN function (Default).
Disabled Disables Built-in LAN function.