Instruction Manual

User’s Manual 3-4
Getting Started
Work habits
A key to avoiding discomfort or injury from repetitive strain is to vary your
activities.
If possible, schedule a variety of tasks into your work day. If you must
spend long periods at the computer, finding ways to break up the routine
can reduce stress and improve your efficiency.
Sit in a relaxed posture. Good positioning of your chair and equipment
as described earlier can reduce tension in your shoulders or neck and
ease back strain.
Vary your posture frequently.
Occasionally stand up and stretch or exercise briefly.
Exercise and stretch your wrists and hands a number of times during
the day.
Frequently, look away from the computer and focus your eyes on a
distant object for several seconds, for example 30 seconds every
15 minutes.
Take frequent short breaks instead of one or two long breaks, for
example, two or three minutes every half hour.
Have your eyes examined regularly and visit a doctor promptly, if you
suspect you might be suffering from a repetitive strain injury.
Please check every couple of months to ensure the fan inlets or
exhaust vents (see sections 2-4 and 2-6) are unobstructed. Clean them
if necessary.
A number of books are available on ergonomics and repetitive strain injury
or repetitive stress syndrome. For more information on these topics or for
pointers on exercises for such stress points as hands and wrists, please
check with your library or book vendor. Also refer to the computer's Safety
Instruction Manual.
Connecting the AC adapter
Attach the AC adapter when you need to charge the battery or you want to
operate from AC power. It is also the fastest way to get started, because
the battery pack will need to be charged before you can operate from
battery power. The AC adapter can be connected to any power source
supplying from 100 to 240 volts and 50 or 60 hertz. For details on using the
AC adapter to charge the battery pack, refer to Chapter 6, Power and
Power-Up Modes
Use of the wrong adapter could damage your computer. TOSHIBA
assumes no liability for any damage in such case. The output rating for the
computer is 19 volts DC.