Owner manual

7-4 User’s Manual
HW Setup
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode,
you can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
USB
Legacy USB Support
Use this option to enable or disable Legacy USB support. If your operating
system does not support USB, you can still use a USB mouse, keyboard,
and FDD by setting the Legacy USB Support to enable.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled Enables the Wake-up on Keyboard.
Disabled Disables the Wake-up on Keyboard (Default).
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN (Default).
Enabled Enables Built-in LAN function (Default).
Disabled Disables Built-in LAN function.