Instruction Manual

User’s Manual 4-29
Operating Basics
Writing with software other than TOSHIBA Disc Creator or Ulead DVD
MovieFactory
®
for TOSHIBA has not been confirmed. Therefore,
operation with other software cannot be guaranteed.
When writing or rewriting
Please observe/consider the following when you write or rewrite to a
CD-R/RW, DVD-R/-RW/-RAM or DVD+R/+RW disc.
Do not perform any of the following actions when writing or rewriting:
Change users in the Windows Vista operating system.
Operate the computer for any other function, including using a
mouse or TouchPad/Dual Mode Pad or closing/opening the LCD
panel.
Start a communication application such as a modem.
Apply impact or vibration to the computer.
Install, remove or connect external devices such as USB devices,
an external display, i.Link devices or optical digital devices.
Use the audio/video control button to reproduce music or voice.
Open the drive.
Do not use shut down/log off and Sleep/Hibernation while writing or
rewriting.
Make sure writing or rewriting is completed before going into
Sleep/hibernation. Writing is completed if you can open the drive tray.
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains or cars. Do not use an unstable
surface such as a stand.
Keep mobile phones and other wireless communication devices away
from the computer.
Always copy data from the hard disk drive to the CD. Do not use cut-
and-paste as the original data will be lost if there is a write error.
How to make a Label Flash DVD
Simplified steps for making a Label Flash DVD:
1. Insert a Label Flash disc in DVD drive.
2. Click Start All Programs DVD MovieFactory for TOSHIBA
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
3. Click Print Disc Label Label Printing. Ulead Label@Onece is
started.
4. Click the General tab.
5. Choose DVD Drive for Printer. e.g. <E:> PIONEER DVD....
6. Add and customize the look of your images and text.
Set printable surface for underside.