Benutzerhandbuch P300/P300D computers.toshiba-europe.
P300/P300D Copyright © 2008 by TOSHIBA Corporation. Alle Rechte vorbehalten. Jede Wiedergabe oder Verwertung außerhalb der durch das Copyright erlaubten Grenzen ist ohne vorherige schriftliche Genehmigung seitens TOSHIBA unzulässig. Bezüglich der Nutzung der in diesem Handbuch enthaltenen Informationen wird keine Patenthaftung übernommen.
P300/P300D Marken Microsoft, Windows und Windows Vista sind entweder eingetragene Marken oder Marken der Microsoft Corporation. DirectX, AcriveDesktop, DirectShow und Windows Media sind eingetragene Marken der Microsoft Corporation. Intel, Intel Core, Celeron, Centrino und Pentium sind Marken oder eingetragene Marken der Intel Corporation. AMD, das AMD Arrow-Logo, AMD Athlon, AMD Turion, Radeon und Kombinationen davon, ATI Mobility Radeon sind Marken von Advanced Micro Devices, Inc.
P300/P300D Bei der Verwendung des Computers Verwenden Sie den tragbaren Computer nicht über einen längeren Zeitraum, wenn er mit der Unterseite auf Ihren Oberschenkeln steht. Bei längerem Betrieb kann sich die Unterseite stark erwärmen. Der anhaltende Hautkontakt mit dem Computer kann zu Unbehagen oder sogar leichten Verbrennungen führen. ■ Versuchen Sie nicht, den Computer selbst zu reparieren. Halten Sie sich immer genau an die Installationsanweisungen.
P300/P300D Erklärung zur EU-Konformität Erfüllung von CE-Normen Dieses Produkt trägt das CE-Kennzeichen in Übereinstimmung mit der R&TTE-Richtlinie 1999/5/EC, die die Einhaltung der EMV-Richtlinie 2004/108/EC und der Niederspannungsrichtlinie 2006/95/EC beinhaltet. Verantwortlich für die CE-Kennzeichnung ist die TOSHIBA EUROPE GmbH, Hammfelddamm 8, 41460 Neuss, Tel.: +49-(0)-2131-158-01. Eine Kopie der entsprechenden EU-Konformitätserklärung erhalten Sie auf folgender Website: http://epps.toshiba-teg.com.
P300/P300D ■ Flugzeuge: Bitte befolgen Sie die Anweisungen des Flugpersonals zu den Nutzungsbeschränkungen. Die Toshiba Corporation haftet nicht für Schäden, die aus der Verwendung dieses Produkts in einer nicht geeigneten Arbeitsumgebung oder aus eingeschränkter Verwendung resultieren.
P300/P300D GOST ENERGY STAR®-Programm Ihr Computermodell ist eventuell ENERGY STAR®-konform. Ist dies der Fall, weist der Computer das ENERGY STAR®-Logo auf. Bitte beachten Sie folgende Hinweise: TOSHIBA ist Partner des ENERGY STAR®Programms der Environmental Protection Agency (EPA) und hat diesen Computer entwickelt, um den aktuellen ENERGY STAR®-Richtlinien zur Energieeffizienz zu entsprechen.
P300/P300D Das Symbol ist bei Ihrem Modell möglicherweise nicht vorhanden; dies richtet sich nach dem Land/Gebiet, in dem Sie den Computer gekauft haben. Sicherheitshinweise für optische Laufwerke Beachten Sie bitte unbedingt die internationalen Hinweise am Ende dieses Abschnitts. Hitachi-LG Data Storage DVD Super Multi GSA-T40F/GSA-T40N ■ Das DVD-Super-Multi-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf.
P300/P300D Panasonic DVD Super Multi UJ-870B ■ Das DVD-Super-Multi-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden. ■ Die Verwendung von Bedienelementen, die Änderung von Einstellungen und die Durchführung von Schritten, die in diesem Handbuch nicht angegeben sind, kann zur Freisetzung gefährlicher Strahlung führen.
P300/P300D Pioneer DVD Super Multi DVR-KD08 ■ Das DVD-Super-Multi-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden. ■ Die Verwendung von Bedienelementen, die Änderung von Einstellungen und die Durchführung von Schritten, die in diesem Handbuch nicht angegeben sind, kann zur Freisetzung gefährlicher Strahlung führen.
P300/P300D TOSHIBA SAMSUNG SPEICHERTECHNOLOGIE CD-RW/DVD-ROM-Laufwerk TS-L462D ■ Das CD-RW/DVD-ROM-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden.
P300/P300D TOSHIBA SAMSUNG SPEICHERTECHNOLOGIE Schreibfähiges DVD-Laufwerk (8-fach, Slim) TS-L632H ■ Das schreibfähige DVD-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden.
P300/P300D TOSHIBA HD DVD-ROM-LAUFWERK SD-L802B ■ Das HD DVD-ROM-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden. ■ Die Verwendung von Bedienelementen, die Änderung von Einstellungen und die Durchführung von Schritten, die im Benutzerhandbuch nicht angegeben sind, kann zur Freisetzung gefährlicher Strahlung führen.
P300/P300D TOSHIBA HD DVD-RW-LAUFWERK SD-L912A ■ Das schreibfähige DVD-Laufwerk arbeitet mit einem Lasersystem. Lesen Sie dieses Handbuch sorgfältig durch und bewahren Sie es zum Nachschlagen für später auf. Wenden Sie sich an ein autorisiertes Service-Center, wenn Wartungsmaßnahmen erforderlich werden. ■ Die Verwendung von Bedienelementen, die Änderung von Einstellungen und die Durchführung von Schritten, die im Benutzerhandbuch nicht angegeben sind, kann zur Freisetzung gefährlicher Strahlung führen.
P300/P300D Internationale Sicherheitshinweise CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure.
P300/P300D OBS! Apparaten innehåller laserkomponent som avger laserstråining överstigande gränsen för laserklass 1. VAROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallista lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
P300/P300D Allgemeine Vorsichtsmaßnahmen TOSHIBA-Computer gewährleisten ein Optimum an Sicherheit, verringern die gesundheitliche Belastung durch Überanstrengung und minimieren die Risiken beim mobilen Einsatz der Geräte. Dennoch können Sie durch Einhaltung einiger Vorsichtsmaßnahmen dazu beitragen, gesundheitliche Beeinträchtigungen oder Schäden am Computer zu vermeiden. Lesen Sie deshalb unbedingt die nachfolgenden Hinweise und die mit „Vorsicht“ markierten Abschnitte im Handbuch.
P300/P300D Schäden durch Überlastung Lesen Sie das Handbuch für sicheres und angenehmes Arbeiten aufmerksam durch. Es enthält Informationen zur Vermeidung von Überlastungserscheinungen an Ihren Handgelenken durch längere Verwendung der Tastatur. In Kapitel 3, Erste Schritte finden Sie auch Hinweise zur Einrichtung des Arbeitsplatzes, zur Körperhaltung und zur Beleuchtung, mit denen sich Überanstrengungen reduzieren lassen.
P300/P300D Mobiltelefone Die Verwendung von Mobiltelefonen kann zu Konflikten mit dem Audiosystem des Computers führen. Der Betrieb des Computers wird dadurch nicht beeinträchtigt, dennoch sollte ein Mindestabstand von 30 cm zwischen dem Computer und einem Mobiltelefon, das gerade verwendet wird, eingehalten werden.
P300/P300D Inhaltsverzeichnis Kapitel 1 Einführung Teileprüfliste . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Merkmale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Besondere Merkmale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12 TOSHIBA Value Added Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Dienstprogramme und Anwendungen . . . . . . . . . . .
P300/P300D Kapitel 4 Grundlagen der Bedienung Verwenden des Touchpads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Verwenden des Fingerabdruck-Sensors (bei einigen Modellen) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 USB-Schlaf- und Ladefunktion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10 Verwenden der Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11 Verwenden des Mikrofons . . . . . . . . . . . .
P300/P300D Kapitel 7 HW Setup Zugriff auf HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Fenster „HW Setup“ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 Kapitel 8 Zusatzeinrichtungen ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 Speicherkarten der folgenden Typen: SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
P300/P300D Vorwort Mit dem Kauf eines Computers der P300/P300D haben Sie eine gute Entscheidung getroffen. Dieser leistungsstarke Notebook-Computer wird Sie jahrelang verlässlich bei der Arbeit unterstützen und bietet dabei hervorragende Erweiterungsmöglichkeiten sowie Multimediafähigkeit. In diesem Handbuch wird beschrieben, wie Sie Ihren P300/P300D Computer einrichten und verwenden.
P300/P300D Kapitel 4, Grundlagen der Bedienung, umfasst Hinweise zur Verwendung der folgenden Geräte und Einrichtungen: TouchPad, Audiosystem, optische Laufwerke, Modem, drahtlose Kommunikation und LANAnschluss. Darüber hinaus finden Sie hier Hinweise zum Umgang mit dem Computer und mit Datenträgern. Kapitel 5, Tastatur, enthält eine Beschreibung der besonderen Tastaturfunktionen, darunter Hotkeys.
P300/P300D Tastaturbedienung Bei manchen Operationen müssen Sie zwei oder mehr Tasten gleichzeitig drücken. Solche Bedienschritte werden durch die Tastenbeschriftungen, verbunden durch Pluszeichen (+), dargestellt. Beispiel: Ctrl + C bedeutet, dass Sie die Taste Ctrl gedrückt halten und dann zur gleichen Zeit C drücken müssen. Wenn drei Tasten benutzt werden, halten Sie die beiden ersten gedrückt und drücken dann die dritte.
Einführung Kapitel 1 Einführung Dieses Kapitel enthält eine Geräteprüfliste und eine Beschreibung der Merkmale und des optionalen Zubehörs des Computers. Einige der Einrichtungen, die in diesem Handbuch beschrieben werden, funktionieren eventuell nicht korrekt, wenn Sie ein Betriebssystem verwenden, das nicht von TOSHIBA vorinstalliert wurde. Teileprüfliste Packen Sie den Computer vorsichtig aus. Heben Sie den Karton und das Verpackungsmaterial für den späteren Gebrauch auf.
Einführung ■ TOSHIBA DVD PLAYER* ■ TOSHIBA HD DVD PLAYER* (nur bei HD DVD-Modellen) ■ TOSHIBA Fingerabdruck-Dienstprogramm* (nur bei Modellen mit Unterstützung des Fingerabdruck-Dienstprogramms) ■ TOSHIBA SD-Speicher-Dienstprogramme ■ TOSHIBA Disc Creator ■ TOSHIBA Gesichtserkennung* ■ TOSHIBA Acoustic Silencer ■ Ulead Movie Factory® for TOSHIBA* ■ Presto! BizCard 5* (bei einigen Modellen verfügbar) ■ Online-Handbuch (optional) Je nach Modell ist möglicherweise zusätzliche Software installiert.
Einführung Speicher Steckplätze PC2-5300 (PM965/GM965/RS690M)/PC2-4200 (GL960) 512 MB, 1024 MB oder 2048 MB. In den Speichersockel kann ein Speichermodul mit bis zu 2 GB installiert werden, um den Systemspeicher auf insgesamt 4 GB (PM965/GM965/M690G) oder 2 GB (GL960) zu erweitern (je nach Modell). Hinweis zum Hauptspeicher Ein Teil des Systemspeichers kann vom Grafiksystem für die Grafikleistung verwendet werden, wodurch sich der für andere Computerprozesse verfügbare Systemspeicher verringert.
Einführung Video-RAM Je nach Modell Mobile Intel® GM965 Express-Chipsatz/Mobile Intel® GL960 Express Chipsatz: Video RAM-Kapazität im Hauptspeicher integriert; Verhältnis von Dynamic Video Memory Technology abhängig. Mobile Intel® GM965 Express Chipsatz/Mobile Intel® PM965 Express Chipsatz in Grafikchip von ATI Mobility Radeon™ HD 3470: Extern 64/128/256 MB. Mobile Intel® GM965 Express Chipsatz/Mobile Intel® PM965 Express Chipsatz in Grafikchip von ATI Mobility Radeon™ HD 3650: Extern 256/512 MB.
Einführung Laufwerke Wichtige Informationen Festplattenlaufwerk 1 Gigabyte (GB) entspricht 109 = 1.000.000.000 Byte hoch 10. Das Computer-Betriebssystem hat jedoch eine geringere Speicherkapazität von 1 GB = 230 = 1.073.741.824 Byte (Zweierpotenz). Die verfügbare Speicherkapazität ist zudem geringer, wenn das Produkt ein oder mehrere vorinstallierte Betriebssysteme umfasst, wie z. B. das Microsoft-Betriebssystem und/oder vorinstallierte Software-Anwendungen, oder Inhalte von Datenträgern.
Einführung DVD-Super-MultiEinige Modelle sind mit einem DVD-Super-MultiLaufwerk (DVD±R DL) Laufwerkmodul ausgestattet, mit dem Sie Daten auf (wieder)beschreibbare CDs/DVDs aufzeichnen (brennen) und CDs/DVDs mit 12 oder 8 cm Durchmesser ohne Adapter verwenden können. DVD-ROMs werden mit maximal 8-facher, CD-ROMs mit maximal 24-facher Geschwindigkeit gelesen.
Einführung HD DVD-ROM Benutzerhandbuch Einige Modelle sind mit einem HD DVD-ROMLaufwerk ausgestattet, in dem Sie CDs oder DVDs ohne Adapter verwenden können.
Einführung HD DVD-RW-Laufwerk Einige Modelle sind mit einem HD DVD-RLaufwerk ausgestattet, in dem Sie CDs oder DVDs ohne Adapter verwenden können.
Einführung LCD Der Flüssigkristallbildschirm (Liquid Crystal Display, LCD) unterstützt hochauflösende Grafik. Der Bildschirm lässt sich in vielen Neigungswinkeln einstellen, sodass optimale Lesbarkeit und maximaler Komfort gewährleistet sind. Eingebaut 17" WXGA+ 16 Millionen Farben, mit folgender Auflösung: 1440 horizontale × 900 vertikale Pixel Grafikadapter Der Grafikadapter optimiert die Anzeigeleistung.
Einführung Steckplätze ExpressCard In den ExpressCard-Steckplatz können Sie ein ExpressCard/34-Modul oder ein ExpressCard/54-Modul einsetzen. Ein Express Card-Modul ist eine kleine Add-in-Karte, die auf der PCI Express- und USB-Schnittstelle basiert. Kartensteckplatz für Unterstützt SD/SDHC-Speicherkarte, MMC, verschiedene digitale MEMORY STICK, MEMORY STICK PRO und xD Medien Picture Card.
Einführung LAN Der Computer ist mit einer LAN-Karte ausgestattet, die Fast Ethernet LAN (100 Mbit/s, 100BASE-TX) oder Gigabit Ethernet LAN (1 Gbit/s, 1000BASE-T) unterstützt. In einigen Vertriebsgebieten ist das Modem als Standardausstattung vorinstalliert (je nach Modell).
Einführung Sicherheit Schlitz für ein Sicherheitsschloss Dient zur Anbringung eines optionalen Sicherheitsseils, mit dem der Computer am Schreibtisch oder an einem anderen schweren Gegenstand befestigt werden kann.
Einführung Automatischer Schlafmodus/ Ruhezustand *1 Mit dieser Funktion wird das System automatisch in den Sleep-Modus oder Ruhezustand versetzt, wenn über einen festgelegten Zeitraum keine Eingabe oder Hardwarezugriff erfolgt. Dies kann in den Energieoptionen angegeben werden. Intelligente Stromversorgung *1 Ein Mikroprozessor in der intelligenten Stromversorgung des Computers prüft den Ladezustand des Akkus und ermittelt die verbleibende Akkukapazität.
Einführung Sleep-Modus Wenn Sie Ihre Arbeit unterbrechen möchten, können Sie den Computer ausschalten, ohne die Software beenden zu müssen. Die Daten bleiben im Arbeitsspeicher erhalten. Nach dem nächsten Einschalten können Sie Ihre Arbeit dort fortsetzen, wo Sie sie unterbrochen haben. *1 Klicken Sie auf , Systemsteuerung, System und Wartung und dann auf Energieoptionen.
Einführung TOSHIBA Button Support Dieses Dienstprogamm steuert den Tastenbetrieb des Computers. Die Anwendung, die mit dieser Taste gestartet wird, kann geändert werden. Dienstprogramme und Anwendungen In diesem Abschnitt werden die vorinstallierten Dienstprogramme beschrieben. Hinweise zur Verwendung der einzelnen Programme finden Sie in den jeweiligen Onlinehandbüchern, Hilfedateien oder ReadmeDateien.
Einführung TOSHIBA DVD-RAMDienstprogramm TOSHIBA DVD-RAM Utility verfügt über eine Funktion zum physischen Formatieren und eine Schreibschutzfunktion für DVD-RAMs. Dieses Dienstprogramm ist im Setupmodul von TOSHIBA Disc Creator enthalten.
Einführung TOSHIBA DVD Mit dem DVD-PLAYER können Sie DVD-Videos PLAYER wiedergeben. Die Steuerungen auf dem (je nach Konfiguration) Bildschirm ähneln denen eines HD DVD-Players. TOSHIBA HD DVD Mit dem HD DVD PLAYER können Sie HD DVDPLAYER Videos wiedergeben. Die Steuerungen auf dem (je nach Konfiguration) Bildschirm ähneln denen eines HD DVD-Players.
Einführung Windows Mobility Center In diesem Abschnitt wird das Windows Mobility Center beschrieben. Mobility Center ist ein Dienstprogramm, mit dem Sie in einem Fenster Zugriff auf mehrere Einstellungen für mobile PCs haben. Standardmäßig sind vom Betriebssystem höchstens acht Bereiche vordefiniert. Zwei weitere Bereiche lassen sich dem Mobility Center hinzufügen.
Rund um den Computer Kapitel 2 Rund um den Computer In diesem Kapitel werden die einzelnen Bestandteile des Computers kurz vorgestellt. Machen Sie sich mit jeder Komponente vertraut, bevor Sie den Computer in Betrieb nehmen. Vorderseite mit geschlossenem Bildschirm Die folgende Abbildung zeigt die Vorderseite des Computers mit geschlossenem Bildschirm.
Rund um den Computer Power-LED Die LED Power leuchtet blau, wenn der Computer eingeschaltet ist. Wenn Sie unter Herunterfahren die Option Sleep Mode wählen, blinkt diese Anzeige orange (eine Sekunde an, zwei Sekunden aus), während der Computer in den Sleep-Modus wechselt. Akku-LED Die LED Akku informiert Sie über den Ladezustand des Akkus. Blau bedeutet volle Kapazität, bei Orange wird der Akku geladen, und wenn die LED orange blinkt, ist der Ladezustand des Akkus schwach.
Rund um den Computer Linke Seite Die Abbildung unten zeigt die linke Seite des Computers. Anschluss für einen externen Monitor Lüftungsschlitze TVAusgang Universal Serial Bus (USB 2.0) HDMIAnschluss LANBuchse Express CardSteckplatz i.LINKAnschluss (IEEE 1394a)Anschluss Linke Seite des Computers Anschluss für einen externen Monitor An diesen 15-poligen Anschluss können Sie einen externen Monitor anschließen.
Rund um den Computer LAN-Buchse Über diese Buchse können Sie den Computer an ein LAN anschließen. Der Adapter unterstützt Fast Ethernet LAN oder Giga Bit Ethernet. (modellabhängig). Nähere Informationen finden Sie in Kapitel 4, Grundlagen der Bedienung. i.LINK-Anschluss (IEEE1394a) Hier können Sie ein externes Gerät wie eine digitale Videokamera anschließen, um Daten mit hoher Geschwindigkeit zu übertragen.
Rund um den Computer Modembuchse Über die Modembuchse und ein Modemkabel wird das Modem direkt mit einer Telefonleitung verbunden. (Abhängig vom erworbenen Computermodell.) ■ Ziehen Sie bei Gewitter das Modemkabel aus der Telefonbuchse. ■ Schließen Sie das Modem nur an eine analoge Telefonleitung an. Wenn Sie das Modem an eine digitale Telefonleitung (ISDN) anschließen, wird es beschädigt. FM-Antennenbuchse Eine Buchse ermöglicht den Anschluss einer FMAntenne (Abhängig vom erworbenen Computermodell.
Rund um den Computer Unterseite Diese Abbildung zeigt die Unterseite des Computers. Schließen Sie den Bildschirm, bevor Sie den Computer umdrehen. Lüftungsschlitze Speichermodul und Wireless LAN-Abdeckung Festplattenabdeckung Akkufreigabe Akkuverriegelung Akku Unterseite des Computers Lüftungsschlitze Durch die Lüftungsschlitze wird die CPU mit Kühlluft versorgt, um ein Überhitzen zu vermeiden.
Rund um den Computer Vorderseite mit geöffnetem Bildschirm Dieser Abschnitt zeigt die Vorderseite des Computers mit geöffnetem Bildschirm. Details finden Sie in den entsprechenden anderen Abbildungen. Um den Bildschirm zu öffnen, klappen Sie ihn nach oben. Stellen Sie einen angenehmen Neigungswinkel ein.
Rund um den Computer Webcam Nehmen Sie ein Bild auf, oder senden Sie ein Bild an Ihre Webkontakte. (Bei einigen Modellen verfügbar) Eingebautes Mikrofon Das Mikrofon kommt gemeinsam mit der Webcam zum Einsatz. Sie können damit mit anderen Webcam-Benutzern sprechen und Nachrichten auf Windows-Medien aufnehmen. Ein/Aus-Taste Schaltet den Computer ein und aus bzw. versetzt den Computer in den Ruhezustand und reaktiviert ihn aus dem Schlafmodus.
Rund um den Computer Fingerabdrucksensor Sie müssen nur Ihren Finger über den Fingerabdrucksensor bewegen, um die folgenden Funktionen zu aktivieren: Anmeldung bei Windows und Zugriff auf eine sichere Homepage über IE (Internet Explorer). Verschlüsseln/Entschlüsseln von Dateien und Ordnern, um den Zugriff durch Unbefugte zu verhindern. Deaktivierung des kennwortgeschützten Bildschirmschoners bei der Reaktivierung aus dem Schlafmodus.
Rund um den Computer Die HD DVD In diesem Abschnitt werden die Funktionen und die Verwendung des HD DVD-ROM-Laufwerks und von HD DVDs beschrieben. Übersicht Mit HD DVDs können Sie Filme, Konzerte und ähnliche Inhalte genießen und dabei die Vorteile der großen Speicherkapazität und der hervorragenden Audio- und Videoqualität dieser Medien nutzen. Auf HD DVD lassen sich auch überlange Filme speichern, wenn die neueste Videokomprimierungstechnologie verwendet wird.
Rund um den Computer ■ Die Wiedergabe von High-Bitraten-Inhalten kann zum Auslassen von Einzelbildern, zu Sprüngen in der Audiowiedergabe und zu einer Verschlechterung der Computerleistung führen. ■ Für das Anzeigen von HD DVD-Inhalten auf einem externen Bildschirm ist ein HDCP-fähiger HDMI™- oder DVI-Eingang am externen Gerät erforderlich. ■ Schließen Sie den Netzadapter des Computers an, wenn Sie eine HD DVD abspielen.
Rund um den Computer HD DVDs (Unterstützung nur durch HD DVD-RW-Laufwerk) ■ HD DVD-Rs können nur einmal beschrieben werden. Die aufgezeichneten Daten können nicht gelöscht oder geändert werden. ■ HD DVD-RWs können mehrfach beschrieben werden. DVD-Super-Multi-Laufwerk (DVD±R DL) Im DVD-Super-Multi-Laufwerkmodul können Sie Daten auf (wieder)beschreibbare CDs/DVDs aufzeichnen (brennen) und CDs/DVDs mit 12 oder 8 cm Durchmesser ohne Adapter verwenden.
Rund um den Computer HD DVD-RW-Laufwerk Im HD DVD-RW-Laufwerkmodul können Sie HD DVDs mit 12 cm Durchmesser oder CDs/DVDs mit 12 oder 8 cm Durchmesser ohne Adapter verwenden. Die Lesegeschwindigkeit ist in der Mitte des Datenträgers niedriger und am äußeren Rand höher.
Rund um den Computer Netzadapter Der Netzadapter wandelt Wechselstrom in Gleichstrom um und verringert die an den Computer gelieferte Spannung. Er kann sich automatisch auf jede Spannung zwischen 100 und 240 Volt sowie auf eine Frequenz von 50 oder 60 Hertz einstellen, sodass Sie den Computer praktisch überall auf der Welt verwenden können. Zum Neuaufladen des Akkus schließen Sie einfach den Netzadapter an eine Steckdose und an den Computer an.
Rund um den Computer Verwenden Sie nur den mitgelieferten Netzadapter. Andere Netzadapter arbeiten mit einer anderen Spannung und anderer Polung, sodass ihre Verwendung zur Erwärmung, unter Umständen zur Entzündung oder anderen Beschädigungen führen kann. Fernbedienung (nur bei bestimmten Modellen) Zum Lieferumfang einiger Modelle gehört eine Fernbedienung, mit der Sie einige der Computerfunktionen steuern können.
Rund um den Computer Helligkeit verringern Verringert die Helligkeit der LCD-Anzeige stufenweise. Helligkeit erhöhen Erhöht die Helligkeit der LCD-Anzeige stufenweise. Energie Startet das Betriebssystem oder fährt es herunter. Diese Taste entspricht der Ein/Aus-Taste des Computers. Standardmäßig entspricht der Schlafmodus dem ausgeschalteten Computer. Um die Einstellung zu ändern, klicken Sie auf Start Systemsteuerung System und Wartung Energieoptionen Choose what the Power button does.
Rund um den Computer Wiedergabe/Pause Startet die Wiedergabe des ausgewählten Mediums. Diese Taste wird auch als Pause-Taste verwendet. Schneller Vorlauf Spult die Medien (Video, DVD, Musik usw.) vor Wiederholung Führt einen kurzen Rücklauf für das aktuelle Medium aus (sieben Sekunden für Videos, ein Musiktitel oder ein DVD-Kapitel) und beginnt dann mit der Wiedergabe. Stopp Stoppt die Wiedergabe des aktuellen Mediums.
Rund um den Computer 30 Grad 15 Grad (vertikal) 5m Infrarotempfängerfenster 30 Grad Fernbedienung Reichweite der Fernbedienung In den folgenden Fällen kann es zu Fehlfunktionen der Fernbedienung kommen, selbst wenn sie im oben beschriebenen Funktionsbereich verwendet wird.
Rund um den Computer Beachten Sie folgende Sicherheitshinweise bei der Verwendung der Batterie der Fernbedienung. ■ Verwenden Sie nur die angegebenen Batterien. ■ Setzen Sie die Batterien richtig herum ein, d. h. achten Sie auf die Polung (+ oder -). ■ Laden Sie die Batterie nicht auf, überhitzen Sie sie nicht, bauen Sie sie nicht auseinander, schließen Sie sie nicht kurz und halten Sie sie von offenem Feuer fern.
Rund um den Computer 2. Stellen Sie sicher, dass die Polung der Batterien korrekt ist. Drücken Sie die Batterie nach unten bis zum Stopper, und schieben Sie sie dann nach vorne in das Batteriegehäuse. Stopper Akku Batterien einsetzen 3. Schließen Sie die Batterieabdeckung. Schließen Sie die Abdeckung bis sie einrastet. Batterieabdeckung schließen Ersetzen von Batterien Wenn die Batterien der Fernbedienung das Ende ihrer Lebensdauer erreicht haben, kann es zu Funktionsstörungen kommen.
Rund um den Computer 3. Setzen Sie die Batterie ein. Stellen Sie sicher, dass die Polung der Batterien korrekt ist. Drücken Sie die Batterie nach unten bis zum Stopper, und schieben Sie sie dann nach vorne in das Batteriegehäuse. 4. Schließen Sie die Batterieabdeckung. Schließen Sie die Abdeckung bis sie einrastet. Einsetzen der schmalen Fernbedienung Einsetzen der schmalen Fernbedienung So setzen Sie die schmale Fernbedienung ein: 1. Stellen Sie sicher, dass der ExpressCard-Steckplatz leer ist. 2.
Erste Schritte Kapitel 3 Erste Schritte In diesem Kapitel finden Sie grundlegende Informationen, die Sie benötigen, um die Arbeit mit Ihrem Computer beginnen zu können. Es werden die folgenden Themen behandelt: Lesen Sie auch das Handbuch der Sicherheitsvorkehrungen, das Sie mit dem Computer erhalten haben. Es ist im Lieferumfang des Computers enthalten und gibt Informationen zur Produkthaftung.
Erste Schritte 3. Setzen Sie den Akku ein. Die Akkufreigabe (2) rastet ein. 4. Sichern Sie die Akkuverriegelung, um den Akku an seinem Platz zu halten. Diese Verriegelung müssen Sie beim Entfernen des Akkus zuerst entsichern. Akkuverriegelung Akkufreigabe Akku sichern Informationen zum Entfernen des Akkus finden Sie im Abschnitt Akku entfernen in Kapitel 6, Stromversorgung und Startmodi.
Erste Schritte ■ Verwenden Sie nur den Netzadapter, den Sie mit dem Computer erhalten haben, oder ein entsprechendes kompatibles Modell. Wenn Sie einen ungeeigneten Netzadapter verwenden, kann der Computer beschädigt werden. TOSHIBA übernimmt keine Haftung für Schäden, die durch die Verwendung eines inkompatiblen Netzadapters entstehen. ■ Halten Sie sich beim Anschließen des Netzadapters an den Computer immer an die Reihenfolge der Schritte, die im Benutzerhandbuch angegeben sind.
Erste Schritte Öffnen des Bildschirms Die Neigung des Bildschirms ist in einem großen Bereich einstellbar und ermöglicht so ein Optimum an Lesbarkeit und Komfort. 1. Klappen Sie den Bildschirm auf und stellen Sie einen angenehmen Neigungswinkel ein. Seien Sie beim Öffnen und Schließen des Bildschirms vorsichtig. Öffnen Sie ihn nicht ruckartig und lassen Sie ihn nicht heftig zufallen, um Schäden am Computer zu vermeiden.
Erste Schritte Einschalten des Computers Einrichten von Windows Vista™ Wenn Sie den Computer zum ersten Mal einschalten, wird der Startbildschirm von Microsoft® Windows Vista™ angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm. Lesen Sie den angezeigten Windows-Endbenutzerlizenzvertrag (EULA) sorgfältig durch. Ausschalten des Computers Der Computer kann in einem von drei Modi ausgeschaltet werden: Beenden (Boot), Ruhezustand (Hibernation) oder Schlafmodus.
Erste Schritte 3. Klicken Sie auf . Klicken Sie dann auf das Pfeilsymbol , das sich auf der Schaltfläche für die Energieverwaltung befindet Wählen Sie im Pulldownmenü Herunterfahren. 4. Schalten Sie alle angeschlossenen Peripheriegeräte aus. Schalten Sie den Computer oder die Peripheriegeräte nicht sofort wieder ein. Warten Sie einen Moment, damit die Kondensatoren vollständig entladen werden können.
Erste Schritte Aktivieren des Sleep-Modus Der Schlafmodus lässt sich auf drei Arten starten: ■ Klicken Sie auf Start. Klicken Sie dann auf der Schaltfläche für die Energieverwaltung ( ) auf Ein/Aus ( ). Diese Funktion muss zuvor in den Energieoptionen aktiviert werden (um die Energieoptionen aufzurufen, klicken Sie auf Systemsteuerung System und Wartung Energieoptionen).
Erste Schritte ■ Speichern Sie Ihre Arbeit. Wird der Ruhezustand aktiviert, speichert der Computer den Inhalt des Arbeitsspeichers auf dem Festplattenlaufwerk. Aus Sicherheitsgründen sollten Sie die Daten jedoch auch selbst speichern. ■ Wenn Sie den Akku entfernen oder den Netzadapter abtrennen, bevor der Speichervorgang abgeschlossen ist, gehen Daten verloren. Warten Sie, bis die LED Festplatte erlischt. ■ Bauen Sie keine Speichermodule ein oder aus, wenn sich der Computer im Ruhezustand befindet.
Erste Schritte Speichern von Daten im Ruhezustand Wenn Sie den Computer im Ruhezustand ausschalten, benötigt der Computer einen Moment, um die aktuellen Daten aus dem Arbeitsspeicher auf der Festplatte zu speichern. Während dieser Zeit leuchtet die LED Festplattenlaufwerk. Nachdem Sie den Computer ausgeschaltet haben und der Inhalt des Arbeitsspeichers auf der Festplatte gespeichert wurde, können Sie die angeschlossenen Peripheriegeräte ausschalten.
Erste Schritte In der Windows-Hilfe finden Sie nähere Informationen zum Beheben von Startproblemen. Die Systemwiederherstellungsoptionen können auch manuell ausgeführt werden, um Probleme zu beheben. Gehen Sie dazu folgendermaßen vor: Befolgen Sie die Anweisungen auf dem Bildschirm. 1. Schalten Sie den Computer aus. 2. Schalten Sie den Computer ein. Wenn der TOSHIBA Bildschirm wiederholt angezeigt wird, drücken Sie F8. 3. Das Menü Erweiterte Boot-Optionen wird angezeigt.
Erste Schritte Erstellen von optischen Datenträgern für die Wiederherstellung Dieser Abschnitt beschreibt die Erstellung von Recovery Discs. ■ Schließen Sie den Netzadapter an, wenn Sie Recovery Discs erstellen. ■ Schließen Sie alle Softwareprogramme mit Ausnahme von Recovery Disc Creator. ■ Deaktivieren Sie Programme (zum Beispiel Bildschirmschoner), die die CPU stark beanspruchen. ■ Betreiben Sie den Computer mit voller Leistung. ■ Verwenden Sie keine Energiesparfunktionen.
Erste Schritte Wiederherstellen der vorinstallierten Software von selbst erstellten Recovery Discs Wenn vorinstallierte Dateien beschädigt wurden, können Sie sie wiederherstellen, indem Sie die von Ihnen erstellten Recovery Discs verwenden, um den Computer in den Zustand zurückzuversetzen, in dem Sie ihn erhalten haben.
Erste Schritte Schließen Sie den Netzadapter an. Andernfalls könnte sich die Batterie während des Wiederherstellungsprozesses vollständig entladen. Wenn Sie das Windows-Betriebssystem neu installieren, wird die Festplatte neu formatiert, wobei alle darauf gespeicherten Daten gelöscht werden. 1. Schalten Sie den Computer aus. 2. Schalten Sie den Computer ein. Wenn der TOSHIBA Bildschirm wiederholt angezeigt wird, drücken Sie F8. 3. Das Menü Erweiterte Boot-Optionen wird angezeigt.
Erste Schritte 4. Es wird ein Menü angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm. 5. Zusätzlich auf Ihrem Computer installierte Software kann nicht mit der Product Recovery DVD-ROM wiederhergestellt werden. Installieren Sie diese Anwendungen (zum Beispiel Works Suite, Spiele) von separaten Datenträgern.
Grundlagen der Bedienung Kapitel 4 Grundlagen der Bedienung Dieses Kapitel enthält grundlegende Informationen zur Bedienung des Computers, darunter zur Verwendung des TouchPads, der optischen Laufwerke, des Audiosystems, des Modems und des Wireless LAN- sowie des LAN-Anschlusses. Darüber hinaus finden Sie hier Hinweise zum Umgang mit dem Computer. Verwenden des Touchpads Legen Sie Ihren Finger auf das Touchpad und bewegen Sie ihn in die Richtung, in die sich der Bildschirmzeiger bewegen soll.
Grundlagen der Bedienung Die zwei Tasten vor der Tastatur haben die gleiche Funktion wie die Tasten einer Maus. Drücken Sie die linke Taste, um einen Menüeintrag auszuwählen oder um ein Text- oder Grafikobjekt zu bearbeiten, auf dem sich der Zeiger befindet. Drücken Sie auf die rechte Taste, um ein Kontextmenü oder je nach Software andere Funktionen aufzurufen. Drücken Sie nicht zu fest auf das Touchpad und verwenden Sie keine spitzen Gegenstände wie zum Beispiel Kugelschreiber.
Grundlagen der Bedienung Finger swipen Gehen Sie wie nachstehend beschrieben vor, um den Finger zur Registrierung oder Authentifizierung über den Sensor zu bewegen („swipen“): 1. Richten Sie das erste Glied des Fingers an der Mitte des Sensors aus. Berühren Sie den Sensor leicht und ziehen Sie den Finger gleichmäßig und gerade in Ihre Richtung. 2. Ziehen Sie den Finger unter leichter Berührung des Sensors zu sich hin, bis die Sensoroberfläche sichtbar ist. 3.
Grundlagen der Bedienung Hinweise zum Fingerabdruck-Sensor Beachten Sie unbedingt die folgenden Richtlinien, da andernfalls (1) der Sensor beschädigt werden kann oder ausfällt und (2) Fingerabdrücke weniger gut erkannt werden. ■ Zerkratzen Sie den Sensor nicht, indem Sie in mit Ihren Fingernägeln oder harten bzw. spitzen Gegenständen berühren. ■ Drücken Sie nicht fest auf den Sensor. ■ Berühren Sie den Sensor nicht mit nassen Fingern oder feuchten Gegenständen.
Grundlagen der Bedienung ■ Fingerabdrücke sind einzigartig und für jeden Finger unterschiedlich. Achten Sie darauf, für die Erkennung immer nur die registrierten Finger zu verwenden. ■ Achten Sie auf die Position und Geschwindigkeit beim Bewegen des Fingers. ■ Es werden bis zu 30~34 Fingerabdruckdaten registriert. ■ Die Fingerabdruckdaten werden im nicht flüchtigen Speicher des Fingerabdrucksensors gespeichert.
Grundlagen der Bedienung Hinweise zum Fingerabdruck-Dienstprogramm ■ Wenn Sie die Verschlüsselungsfunktion von Windows Vista™, EFS (Encryption File System), zum Verschlüsseln einer Datei verwenden, kann die Datei mit der Verschlüsselungsfunktion dieser Software nicht weiter verschlüsselt werden. ■ Sie können ein Backup der Fingerabdruckdaten oder der in der Kennwortbank registrierten Informationen erstellen.
Grundlagen der Bedienung 6. Der Bildschirm „Fingerprint Image Capture“ (FingerabdruckBilderfassung) wird angezeigt. Befolgen Sie die Anweisungen auf dem Bildschirm und verwenden Sie denselben Finger, den Sie im Control Center gewählt haben, um Ihren Finger dreimal zu swipen und gute Bilder für die Erstellung der Fingerabdruckvorlage zu erhalten. 7. Für den Fall einer Fingerverletzung oder fehlgeschlagenen Authentifizierung sollten Sie mindestens einen weiteren Fingerabdruck registrieren.
Grundlagen der Bedienung Fingerabdruck-Authentifizierung beim Systemstart Allgemein Die tastaturbasierte Authentifizierung des Benutzerpasswortes beim Starten des Systems kann durch die Fingerabdruck-Authentifizierung ersetzt werden.
Grundlagen der Bedienung Einzelanmeldung mit Fingerabdruck Allgemein Dabei handelt es sich um eine Funktion, die es dem Benutzer ermöglicht, die Authentifizierung sowohl für das Benutzerpasswort (und optional das HDD-Benutzerpasswort und das Supervisorpasswort) als auch die Anmeldung bei Windows nur mithilfe der Fingerabdruck-Authentifizierung beim Starten durchzuführen.
Grundlagen der Bedienung USB-Schlaf- und Ladefunktion Ihr Computer kann den USB-Anschluss auch dann mit USB Bus Power (DC 5 V) versorgen, wenn der Computer ausgeschaltet ist. Der Begriff „ausgeschaltet“ schließt den Schlafmodus, den Ruhezustand und den vollständig ausgeschalteten Zustand ein. Diese Funktion kann nur für Anschlüsse verwendet werden, die die USBSchlaf- und Aufladefunktion unterstützen (im Folgenden „kompatible Anschlüsse“ genannt).
Grundlagen der Bedienung Büroklammer, Haarklammer und ähnliche Gegenstände aus Metall erhitzen sich, wenn sie mit USB-Anschlüssen in Kontakt kommen. Achten Sie darauf, dass USB-Anschlüsse nicht mit Gegenständen aus Metall in Berührung kommen, zum Beispiel beim Transport des Computers in einer Tasche. Aktivieren/deaktivieren der USB-Schlaf- und Ladefunktion Sie können die Aktivierung/Deaktivierung der USB-Schlaf- und Ladefunktion im HW Setup einstellen.
Grundlagen der Bedienung Verwenden der Software Die Webcam-Software ist so vorkonfiguriert, dass sie beim Starten von Windows Vista startet; wenn Sie sie erneut starten möchten, gehen Sie zu Start Alle Programme Kamera-Assistenten-Software KameraAssistenten-Software. Aufnehmen von Standbildern Aufnehmen von Videos Aufnehmen von Audio Funktion Anzeigefenster Kameraauflösung Effekte Ton aus Aufnehmen von Standbildern Klicken Sie, um eine Vorschau des aufgenommenen Bilds anzuzeigen.
Grundlagen der Bedienung Eigenschaften Auf der Registerkarte Optionen können Sie das Bild umdrehen, zoomen, die Flimmerrate bearbeiten, den Nachtmodus auswählen oder den Hintergrundbeleuchtungsausgleich einstellen; auf der Registerkarte Bild können Sie die Farbeinstellungen ändern; auf der Registerkarte Profile können Sie die Beleuchtungseinstellungen ändern.
Grundlagen der Bedienung Verwenden des optischen Laufwerks Der Text und die Abbildungen in diesem Abschnitt beziehen sich hauptsächlich auf das optische Laufwerk. Die Bedienung ist jedoch für alle anderen optischen Laufwerke identisch. Mit dem Laufwerk können Sie CD-/DVD-gestützte Programme ausführen. Sie können CDs mit 12 cm oder 8 cm Durchmesser ohne Adapter verwenden. Für den CD/ DVD-ROM-Betrieb wird ein ATAPI-Schnittstellen-Controller verwendet.
Grundlagen der Bedienung Lade manuell öffnen 2. Ziehen Sie vorsichtig an der Schublade, um sie vollständig zu öffnen. Lade vollständig öffnen 3. Legen Sie die Disc mit der beschrifteten Seite nach oben in die Laufwerkschublade.
Grundlagen der Bedienung Disc einlegen Wenn die Schublade vollständig geöffnet ist, ragt das Gehäuse des Computers etwas über die Schublade hinaus. Deshalb müssen Sie die Disc beim Einlegen leicht geneigt halten. Prüfen Sie nach dem Einlegen, ob die Disc, wie in der Abbildung gezeigt, flach in der Lade liegt. ■ Berühren Sie nicht die Laserlinse. Sie könnten ihre Ausrichtung verändern. ■ Achten Sie darauf, dass keine Fremdkörper in das Laufwerk geraten.
Grundlagen der Bedienung Schublade schließen Discs entnehmen Beachten Sie die folgenden Schritte und halten Sie sich an die Abbildung, um eine Disc aus dem Laufwerk zu nehmen. Drücken Sie nicht auf die Entnahmetaste, während der Computer noch auf das Laufwerk zugreift. Öffnen Sie die Lade erst, wenn die Laufwerkanzeige nicht mehr leuchtet. Warten Sie außerdem, bis sich die Disc nicht mehr dreht, bevor Sie sie herausnehmen. 1. Drücken Sie auf die Entnahmetaste, um die Schublade etwas zu öffnen.
Grundlagen der Bedienung Disc aus dem Laufwerk nehmen 3. Drücken Sie die Schublade in der Mitte nach hinten, um sie zu schließen. Schieben Sie vorsichtig, bis sie einrastet. Beschreiben von CDs/DVDs im DVD-Super-Multi-Laufwerk oder HD DVD-ROM-Laufwerk mit DVD±R DL-Unterstützung Einige Modelle dieser Serie sind mit einem DVD-Super-Multi-Laufwerk oder HD DVD-ROM-Laufwerk (mit Unterstützung für DVD±R DL) ausgestattet.
Grundlagen der Bedienung Vor dem Aufzeichnen ■ Ausgehend von TOSHIBAs Tests zur eingeschränkten Kompatibilität empfehlen wir die Produkte der folgenden Hersteller von DVD-R/-RW/ +R/+RW/-RAM-Medien. TOSHIBA übernimmt jedoch in keinem Fall die Garantie für die Funktionstüchtigkeit, Qualität oder Leistung der Datenträger. Die Qualität des Mediums kann die Qualität der Aufzeichnung beeinflussen. CD-R: CD-RW: High-Speed CD-RW: TAIYO YUDEN Co., Ltd. MITSUBISHI KAGAKU MEDIA CO, LTD. Ricoh Co., Ltd.
Grundlagen der Bedienung ■ Es gibt zwei Arten von DVD-R-Medien: eine für Authoring und eine für allgemeine Verwendung (General Use). Verwenden Sie keine Authoring-Discs. In einem Computerlaufwerk können nur DVDs für die allgemeine Verwendung beschrieben werden. ■ Es wird nur Format 1 für DVD-R DL unterstützt. Deshalb können Sie keine zusätzlichen Daten hinzufügen. Wenn Sie weniger als 4,7 GB Daten schreiben möchten, sollten Sie DVD-R (SL)-Discs verwenden.
Grundlagen der Bedienung ■ Verwenden Sie keine Festplatten-Dienstprogramme, zum Beispiel Programme zur Beschleunigung des Festplattenzugriffs. Sie können Instabilitäten verursachen und Daten beschädigen. ■ Schreiben Sie von der Festplatte des Computers auf die DVD/CD. Versuchen Sie nicht, von gemeinsam genutzten Geräten wie etwa einem LAN-Server oder einem anderen Netzwerkgerät zu schreiben. ■ Das Beschreiben von Medien mit anderer Software als TOSHIBA Disc Creator wird nicht empfohlen.
Grundlagen der Bedienung Haftungsausschluss (DVD-Super-Multi-Laufwerk oder HD DVD-ROMLaufwerk mit DVD±R DL-Unterstützung) TOSHIBA ist für die folgenden Schäden nicht haftbar: ■ Schäden an CD-R/RWs oder DVD-R/RWs, DVD+R/RWs und DVD-RAMs, die durch das Beschreiben oder Wiederbeschreiben mit diesem Produkt verursacht werden. ■ Jegliche Veränderungen bzw. Verluste des aufgezeichneten Inhalts der CD-R/RW oder DVD-R/-RW/+R/+RW/-RAM, die beim Beschreiben bzw.
Grundlagen der Bedienung ■ Im Abschnitt „Beschreibbare Discs“ in Kapitel 2 finden Sie nähere Angaben zu den Arten beschreibbarer CDs, DVDs und HD DVDs, die von diesem Computer unterstützt werden. ■ Schalten Sie das optische Laufwerk nicht aus, während der Computer darauf zugreift, da dies zu Datenverlust führen könnte. ■ Mit der Media Center-Option CD/DVD erstellen können Sie nicht auf CD-R/RW-Discs zugreifen.
Grundlagen der Bedienung Wegen der technischen Einschränkungen bei den aktuellen Laufwerken zum Beschreiben optischer Medien können qualitativ minderwertige Datenträger oder Probleme mit den Hardwaregeräten zu unerwarteten Schreibfehlern führen. Deshalb ist es empfehlenswert, mindestens zwei Sicherungskopien wichtiger Daten zu erstellen, auf die Sie notfalls zurückgreifen können.
Grundlagen der Bedienung HD DVD-R DL: MITSUBISHI KAGAKU MEDIA CO., LTD. Hitachi Maxell Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD. HD DVD-RW: RITEK Co. HD DVD-R: ■ In diesem Laufwerk können Sie keine Discs verwenden, die ein schnelleres Schreiben als 8-fach (DVD-R, DVD+R und DVD+RW), 6-fach (DVD-RW), 5-fach (DVD-RAM), 4-fach (DVD-R (Dual Layer) und DVD+R (Double Layer)) ermöglichen. ■ Einige Arten und Formate von DVD-R- (Dual Layer) und DVD+R(Double Layer) Discs können möglicherweise nicht gelesen werden.
Grundlagen der Bedienung ■ Beim Beschreiben von DVD-R-, DVD-R (Dual Layer)-, DVD-RW-, DVD+R-, DVD+R (Double Layer)-, DVD+RW-, DVD-RAM-, HD DVD-R-, HD DVD-R (Dual Layer)- oder HD DVD RW-Medien wird etwas Speicherplatz für die Dateiverwaltung benötigt, sodass Sie möglicherweise nicht die volle Kapazität der Disc nutzen können. ■ Da der Datenträger auf dem DVD-Standard basiert, wird er unter Umständen mit Platzhalterdaten gefüllt, wenn sich weniger als 1 GB Daten darauf befinden.
Grundlagen der Bedienung Während des Beschreibens oder Wiederbeschreibens von Discs Bitte beachten Sie die folgenden Punkte während des Schreibens oder Wiederbeschreibens von Daten auf CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer), DVD+RW, DVD-RAM, HD DVD-R, HD DVD-R (Dual Layer) oder HD DVD-RW: ■ Kopieren Sie die Daten von der Festplatte auf das optische Medium. Verwenden Sie nicht die Methode Ausschneiden und Einfügen, da die Daten bei einem Schreibfehler verloren gehen.
Grundlagen der Bedienung TOSHIBA Disc Creator Beachten Sie bei der Verwendung von TOSHIBA Disc Creator die folgenden Einschränkungen: ■ Sie können kein DVD-Video mit TOSHIBA Disc Creator erstellen. ■ Sie können kein DVD-Audio mit TOSHIBA Disc Creator erstellen.
Grundlagen der Bedienung ■ TOSHIBA Disc Creator unterstützt die Aufzeichnung auf DVD-RAMDiscs nicht. Sie sollten dazu Windows Explorer oder ein ähnliches Dienstprogramm verwenden. ■ Wenn Sie eine DVD sichern, sollten Sie darauf achten, dass das Quelllaufwerk die Aufzeichnung von DVD-R-, DVD-R- (Dual Layer), DVD-RW-, DVD+R-, DVD+R- (Double Layer) oder DVD+RW-Medien unterstützt, da sonst die Quelldisc möglicherweise nicht richtig gesichert wird.
Grundlagen der Bedienung Anzeige Mit Ulead DVD MovieFactory® for TOSHIBA können Sie Videos aufzeichnen. Verwendung von Ulead DVD MovieFactory® for TOSHIBA So erstellen Sie eine Label Flash-DVD Vereinfachte Schritte zum Erstellen einer Label Flash-DVD: 1. Legen Sie eine Label Flash-Disc in das DVD-Laufwerk ein. Legen Sie DRUCKSEITE als Unterseite fest. 2. Klicken Sie auf Start All Programme DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher, um DVD MovieFactory zu starten. 3.
Grundlagen der Bedienung Vereinfachtes Erstellen eines DVD-Videos durch Hinzufügen der Videoquelle: 1. Klicken Sie auf Alle Programme DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher, um DVD MovieFactory zu starten. 2. Klicken Sie auf Video Disc New Project, um den zweiten Launcher zu starten, wählen Sie den Projekttyp und rufen Sie dann MovieFactory auf. 3. Wählen Sie bei HD Disk die Quelle aus, indem Sie auf Add Video files klicken, um das Browser-Dialogfeld zu öffnen. 4.
Grundlagen der Bedienung ■ CD-Recorder-, JPEG-, DVD-Audio-, mini DVD- und Video CDFunktionen werden in dieser Version nicht unterstützt. ■ Wenn Sie Video auf DVD oder Band aufnehmen, schließen alle anderen Programme. ■ Deaktivieren Sie Programme (zum Beispiel Bildschirmschoner), die die CPU stark beanspruchen. ■ MP3-Decodierung und -Codierung wird nicht unterstützt. 2.
Grundlagen der Bedienung Umgang mit Datenträgern In diesem Abschnitt finden Sie Tipps zum Schutz der auf CDs/DVDs/HD DVDs gespeicherten Daten. Gehen Sie mit Ihren Datenträgern sorgfältig um. Durch Einhaltung nachfolgender Richtlinien wird die Lebensdauer der Datenträger verlängert, und die darauf gespeicherten Daten werden geschützt: CD/DVD/HD DVD 1. Bewahren Sie die CDs/DVDs/HD DVDs in der Originalverpackung auf, um sie vor Beschädigung und Verschmutzung zu schützen. 2.
Grundlagen der Bedienung Gebietsauswahl Die Bestimmungen bezüglich der Telekommunikation variieren von Region zu Region, deshalb müssen Sie darauf achten, dass die Einstellungen für das internationale Modem für das Gebiet, in dem es verwendet wird, korrekt sind. So wählen Sie ein Gebiet aus: 1. Klicken Sie auf Start, Alle Programme, TOSHIBA, Netzwerkumgebung und Gebietsauswahl. Verwenden Sie nicht die Funktion zur Länder-/Gebietsauswahl im ModemSetup der Systemsteuerung, falls verfügbar.
Grundlagen der Bedienung Standortliste für die Gebietsauswahl Es wird ein Untermenü mit Informationen über die Telefonstandorte angezeigt. Dialogfeld öffnen, wenn Gebietscodes für Modem und aktuellen Telefon-Standort nicht übereinstimmen Es wird eine Warnung angezeigt, wenn die Einstellungen für den Gebietscode nicht mit dem Telefonstandort übereinstimmen. Modemauswahl Wenn der Computer das interne Modem nicht erkennt, wird ein Dialogfeld angezeigt. Wählen Sie den COM-Port, den das Modem verwendet.
Grundlagen der Bedienung Internes Modem anschließen Ziehen Sie nicht am Kabel und bewegen Sie den Computer nicht, während das Kabel angeschlossen ist. Gerät abtrennen So trennen Sie das Kabel des optionalen internen Modems ab: 1. Ziehen Sie den Modemstecker aus der Telefonanschlussbuchse. 2. Drücken Sie auf die Lasche des Steckers, der sich in der Buchse des Computers befindet, und ziehen Sie ihn heraus.
Grundlagen der Bedienung Verwenden des FM-Tuners Die Verfügbarkeit dieser Funktion ist modellabhängig. 1. Stecken Sie die FM-Tuner-Antenne in die FM-Antennenbuchse. FM-Tuner-Antenne FMAntennenbuchse 2. Wählen Sie Start Alle Programme FM Tuner Utility, um die FMSoftware zu starten.
Grundlagen der Bedienung Drahtlose Kommunikation Die Funktion für drahtlose Kommunikation unterstützt sowohl Wireless LAN- als auch Bluetooth-Geräte ■ Verwenden Sie die Wireless LAN- (Wi-Fi) oder Bluetooth-Funktionen nicht in der Nähe von Mikrowellengeräten oder in Gebieten, die Funkstörungen oder magnetischen Feldern ausgesetzt sind. Störungen durch Mikrowellengeräte oder andere Quellen können den Wi-Fi- oder Bluetooth-Betrieb unterbrechen.
Grundlagen der Bedienung Sicherheit ■ Aktivieren Sie die Verschlüsselungsfunktion. Andernfalls ist Ihr Computer nicht vor unberechtigten Zugriffen über das Wireless LAN geschützt, sodass Ihre Daten von Unbefugten ausspioniert, verwendet oder zerstört werden können. TOSHIBA empfiehlt deshalb, unbedingt die Verschlüsselungsfunktion zu aktivieren. ■ TOSHIBA ist nicht haftbar für Datenspionage und die Zerstörung von Daten mithilfe des Wireless LAN.
Grundlagen der Bedienung Schalter für drahtlose Kommunikation Die Wireless LAN-Funktion wird mit diesem Schalter aktiviert oder deaktiviert. Wenn der Schalter auf Aus (Off) steht, werden keine Daten gesendet oder empfangen. Schieben Sie den Schalter nach rechts bzw. nach links, um die drahtlose Kommunikation zu aktivieren bzw. zu deaktivieren. In Flugzeugen und Krankenhäusern müssen Sie den Schalter auf „Aus“ stellen. Überprüfen Sie die LED. Sie erlischt, wenn die drahtlose Kommunikation deaktiviert wurde.
Grundlagen der Bedienung LAN Der Computer unterstützt Fast Ethernet-LANs oder Giga-Bit-EthernetLANs (je nach Modell). LAN-Kabeltypen Vor dem Anschluss an ein LAN muss der Computer entsprechend konfiguriert werden. Wenn Sie sich mit den Standardeinstellungen des Computers an ein LAN anmelden, kann es bei LAN-Vorgängen zu Fehlern kommen. Fragen Sie Ihren LAN-Administrator nach den korrekten Einstellungen und Verfahren.
Grundlagen der Bedienung Abtrennen des LAN-Kabels So trennen Sie das LAN-Kabel ab: 1. Drücken Sie auf die Lasche des Steckers, der sich in der LAN-Buchse des Computers befindet, und ziehen Sie ihn heraus. 2. Ziehen Sie das Kabel auf die gleiche Art aus dem LAN-Hub. Fragen Sie Ihren LAN-Administrator, bevor Sie die Verbindung trennen.
Grundlagen der Bedienung ■ Schalten Sie den Computer immer aus, wenn Sie ihn bewegen. Falls die Ein/Aus-Taste mit einer Tastensperre versehen ist, verriegeln Sie diese. Setzen Sie den Computer keinen Stößen aus. Andernfalls können es zu einer Beschädigung des Computers, zu Fehlfunktionen oder Datenverlusten kommen. ■ Transportieren Sie den Computer nicht, wenn ExpressCards installiert sind. Dabei könnten der Computer und/oder die ExpressCards beschädigt werden.
Tastatur Kapitel 5 Tastatur Die Anzahl der Tasten auf der Tastatur ist davon abhängig, für welches Land/Gebiet der Computer konfiguriert wurde. Es stehen Tastaturbelegungen für verschiedene Sprachen zur Verfügung. Auf der Tastatur finden Sie fünf Arten von Tasten: Schreibmaschinentasten, Funktionstasten, Softkeys, Windows®-Sondertasten und Cursortasten.
Tastatur Funktionstasten F1 bis F12 Die Funktionstasten – nicht zu verwechseln mit der Taste Fn – sind 12 Tasten am oberen Rand der Tastatur. Diese Tasten unterscheiden sich in der Funktion von den anderen Tasten. F1 bis F12 heißen Funktionstasten, weil mit ihnen vorprogrammierte Funktionen ausgeführt werden. Tasten, die mit bestimmten Symbolen beschriftet sind, erfüllen beim Computer besondere Aufgaben, wenn sie zusammen mit der Taste Fn benutzt werden.
Tastatur Hotkeys + Ton aus: Schaltet den Ton ein und aus. + Sicherung: Aktiviert den Sicherungsmodus. Sie müssen sich erneut anmelden, um den Desktop zu reaktivieren. + Stromversorgungsplan: Zeigt die Energiesparmodi an und ermöglicht die Änderung der Stromversorgungseinstellungen. + Sleep: Mit dieser Tastenkombination aktivieren Sie den Sleep-Modus. + Ruhezustand: Mit dieser Tastenkombination aktivieren Sie den Ruhezustand. + Ausgabe: Ändert das aktive Anzeigegerät.
Tastatur + Drahtlose Kommunikation: Mit dem Schalter für die drahtlose Kommunikation wechseln Sie zwischen den aktiven drahtlosen Geräten. + TouchPad: Aktiviert oder deaktiviert die Touch Pad-Funktion. + Zoom: Ändert die Bildschirmauflösung. + TOSHIBA Zooming Utility (verkleinern): Verkleinert die auf dem Desktop angezeigten Symbole oder die in einem der Anwendungsfenster angezeigte Schriftart.
Tastatur Windows®-Sondertasten Die Tastatur verfügt über zwei Tasten, die unter Windows® besondere Funktionen haben: die Windows®-Taste ruft das Menü Start auf, die Anwendungstaste hat die gleiche Funktion wie die sekundäre Maustaste. Mit dieser Taste rufen Sie das Windows®-Menü Start auf. Diese Taste hat die gleiche Funktion wie die sekundäre Maustaste. Erzeugen von ASCII-Zeichen Nicht alle ASCII-Zeichen lassen sich mit den normalen Tasten erzeugen.
Stromversorgung und Startmodi Kapitel 6 Stromversorgung und Startmodi Der Computer kann entweder über den Netzadapter oder über die eingebauten Akkus mit Strom versorgt werden. In diesem Kapitel wird erläutert, wie Sie welche Energieressourcen am effektivsten nutzen und die Akkus laden und auswechseln. Darüber hinaus erhalten Sie hier Tipps zum Sparen von Akkuenergie und Informationen zu den Startmodi.
Stromversorgung und Startmodi Stromversorgungs-LEDs Wie aus der vorstehenden Tabelle deutlich wird, zeigen die LEDs Akku und Power die Funktionsfähigkeit des Computers sowie den Ladezustand des Akkus an. LED „Akku“ Anhand der LED Akku lässt sich der Ladezustand des Akkus überprüfen. Die folgenden LED-Signale geben Auskunft über den Akkustatus: Blinkt orange Die Akkuladung ist gering. Der Netzadapter muss angeschlossen werden, um den Akku wieder aufzuladen.
Stromversorgung und Startmodi Akkutypen Der Computer verfügt über die folgenden Akkutypen: ■ Akku (6 Zellen oder 9 Zellen je nach Modell) ■ Echtzeituhr-Akku (RTC-Akku) ■ Der Akku besteht aus einer Lithium-Ionen-Batterie, die bei unsachgemäßer Handhabung explodieren kann. Erkundigen Sie sich bei den zuständigen Behörden, wie Sie diese Batterien entsorgen müssen. Verwenden Sie nur einen von TOSHIBA empfohlenen Akku. ■ Nehmen Sie den Akku nicht aus dem Computer, während der Schlafmodus aktiviert ist.
Stromversorgung und Startmodi Um die maximale Kapazität des Akkus zu erhalten, sollten Sie den Computer mindestens einmal im Monat im Akkubetrieb laufen lassen, bis der Akku vollständig entladen ist. Lesen Sie dazu den Abschnitt Akkulebensdauer verlängern in diesem Kapitel. Wird der Computer länger als einen Monat ausschließlich über den Netzadapter mit Netzstrom betrieben, kann der Akku möglicherweise nicht mehr vollständig aufgeladen werden.
Stromversorgung und Startmodi Pflege und Gebrauch des Akkus Der Akku ist eine entscheidende Komponente eines tragbaren Computers. Durch sachgerechte Pflege lässt sich sowohl die Betriebszeit als auch die Lebensdauer des Akkus verlängern. Befolgen Sie sorgfältig die Anweisungen in diesem Abschnitt, um einen sicheren Einsatz und maximale Leistung des Akkus sicherzustellen. Sicherheitsmaßnahmen Wenn Sie Akkus unsachgemäß handhaben, können Tod, schwere Verletzungen oder Sachschäden die Folge sein.
Stromversorgung und Startmodi 6. Verwenden Sie nur den Akku, den Sie mit dem Computer erhalten haben, oder einen vom Hersteller zugelassenen Akku. Akkus haben unterschiedliche Spannungen und Polaritäten der Anschlusskontakte. Wenn Sie einen ungeeigneten Akku verwenden, kann dies Rauch oder Feuer erzeugen oder zum Bersten oder Entzünden des Akkus führen. 7. Setzen Sie den Akku keinen hohen Temperaturen aus; lagern Sie ihn zum Beispiel nicht in der Nähe einer Heizung.
Stromversorgung und Startmodi Achtung 1. Verwenden Sie den Akku nicht mehr, wenn die Ladekapazität des Akkus beeinträchtigt ist oder wenn die Warnmeldung angezeigt wird, dass die Akkuenergie erschöpft ist. Die Weiterverwendung eines entladenen oder nicht mehr ladefähigen Akkus kann zu Datenverlust führen. 2. Entsorgen Sie Akkus nicht mit dem normalen Hausmüll. Bringen Sie sie zu Ihrem TOSHIBA-Händler oder zu einer Recycling-Einrichtung zurück, um Ressourcen wiederzuverwenden und Umweltschäden zu vermeiden.
Stromversorgung und Startmodi Vorgehensweise Um einen Akku wieder aufzuladen, ohne ihn aus dem Computer zu entfernen, stecken Sie den Netzadapter in den Gleichstromeingang (DC IN 19V) und schließen das Netzkabel an eine spannungsführende Steckdose an. Die LED Akku leuchtet orange, wenn der Akku geladen wird. Verwenden Sie zum Laden des Akkus nur den an das Stromnetz angeschlossenen Computer. Laden Sie den Akku nicht mit einem anderen Gerät auf.
Stromversorgung und Startmodi Gehen Sie in diesen Fällen folgendermaßen vor. 1. Entladen Sie den Akku vollständig, indem Sie den Computer so lange eingeschaltet lassen, bis er sich automatisch abschaltet. 2. Schließen Sie den Netzadapter an. 3. Laden Sie den Akku auf, bis die LED Akku blau leuchtet. Wiederholen Sie diesen Vorgang zwei- oder dreimal, bis der Akku wieder seine normale Kapazität erreicht. Wenn Sie den Netzadapter angeschlossen lassen, verkürzt sich die Lebensdauer des Akkus.
Stromversorgung und Startmodi ■ Anfängliche Ladung des Akkus ■ Intensität der Verwendung von Zusatzgeräten, wie z. B. einer ExpressCard, die über den Akku mit Strom versorgt werden ■ Durch die Aktivierung des Schlafmodus sparen Sie Akkuenergie, wenn Sie den Computer häufig ein- und ausschalten ■ Ort der Speicherung von Programmen und Daten ■ Durch Schließen des Bildschirms bei Nichtbenutzung der Tastatur können Sie Strom sparen. ■ Bei niedrigen Temperaturen sinkt die Betriebszeit des Akkus.
Stromversorgung und Startmodi 5. Laden Sie den Akku auf, bis die LED Akku blau leuchtet. ■ Wenn Sie zusätzliche Akkus haben, verwenden Sie sie abwechselnd. ■ Nehmen Sie den Akku heraus, wenn Sie den Computer längere Zeit (länger als einen Monat) nicht benutzen. ■ Lagern Sie Ersatzakkus an einem kühlen, trockenen Ort ohne direkte Sonneneinstrahlung. Ersetzen des Akkus Wenn der Akku das Ende seiner Lebensdauer erreicht, muss er durch einen neuen ersetzt werden.
Stromversorgung und Startmodi 5. Schieben Sie die Akkufreigabe und halten Sie sie fest, nachdem Sie die Akkuverriegelung entsichert haben, und nehmen Sie den Akku heraus. Akkufreigabe Akkuverriegelung Akku Entsichern des Akkus Einsetzen des Akkus So setzen Sie eine Batterie ein: ■ Der Akku besteht aus einer Lithium-Ionen-Batterie, die bei unsachgemäßer Handhabung explodieren kann. Erkundigen Sie sich bei den zuständigen Behörden, wie Sie diese Batterien entsorgen müssen.
Stromversorgung und Startmodi Starten des Computers mit Passwort Wenn Sie bereits ein Passwort eingetragen haben, können Sie den Computer auf zwei Arten starten: ■ Swipen Sie Ihren Finger über den Sensor, wenn Sie bereits einen Fingerabdruck beim Fingerabdruck-Dienstprogramm registriert und die Fingerabdruck-Sicherheit beim Einschalten aktiviert haben.
Stromversorgung und Startmodi Hotkeys Sie können den Sleep-Modus mit dem Hotkey Fn + F3 und den Ruhezustand mit Fn + F4 aktivieren. Weitere Informationen erhalten Sie in Kapitel 5, Tastatur. LCD-gesteuerte Ein-/Ausschaltung Der Computer kann so eingestellt werden, dass er beim Schließen des Bildschirms automatisch ausgeschaltet wird. Wenn Sie den Bildschirm aufklappen, wird der Computer im Sleep-Modus oder im Ruhezustand wieder eingeschaltet, nicht jedoch im Bootmodus.
HW Setup Kapitel 7 HW Setup In diesem Kapitel wird beschrieben, wie Sie den Computer mit dem Programm TOSHIBA HW Setup konfigurieren. In TOSHIBA HW Setup können Sie die folgenden Einstellungen konfigurieren: Allgemein, Passwort, Anzeige, Boot-Reihenfolge, Tastatur, LAN und USB. Zugriff auf HW Setup Zum Ausführen von HW Setup klicken Sie auf TOSHIBA, Dienstprogramme, HWSetup.
HW Setup Passwort Auf dieser Registerkarte können Sie das Benutzerpasswort zum Einschalten festlegen oder löschen. Benutzerpasswort Für die Einrichtung eines neuen Passworts oder Änderung eines vorhandenen Passworts. Nicht eingetragen Änderung eines vorhandenen Passworts Registriert Einrichtung eines neuen Passworts anhand der Anweisungen auf dem Bildschirm Benutzerzeichenfolge In diesem leeren Feld wird bei der Anzeige des Passwortfeldes beim Start eine Meldung angezeigt.
HW Setup Tastatur Reaktivierung durch Tastatur (Wakeup-on-Keyboard) Wenn diese Funktion aktiviert ist und sich der Computer im Schlafmodus befindet, können Sie das System reaktivieren, indem Sie eine beliebige Taste drücken. Die Funktion gilt nur für die eingebaute Tastatur und nicht für den Ruhezustand. Aktiviert Aktiviert die Wakeup-on-Keyboard-Funktion. Deaktiviert Deaktiviert die Wakeup-on-Keyboard-Funktion (Standardeinstellung).
HW Setup LAN Eingebaute LAN-Unterstützung Mit dieser Funktion wird der integrierte LAN-Anschluss aktiviert oder deaktiviert. Aktiviert Aktiviert die eingebauten LAN-Funktionen (Standardeinstellung). Deaktiviert Deaktiviert die eingebauten LAN-Funktionen.
Zusatzeinrichtungen Kapitel 8 Zusatzeinrichtungen Durch spezielle Zusatzeinrichtungen können Sie Ihren Computer noch leistungsfähiger und vielseitiger machen. In diesem Kapitel wird beschrieben, wie Sie die folgenden von Ihrem TOSHIBA Händler erhältlichen Einrichtungen verbinden bzw.
Zusatzeinrichtungen Einsetzen von ExpressCards Ein ExpressCard-Anschluss befindet sich auf der linken Seite des Computers. Der Computer ermöglicht die Installation von ExpressCards bei laufendem Betrieb; Sie müssen den Computer vor der Installation also nicht ausschalten. So installieren Sie eine ExpressCard: 1. Setzen Sie die ExpressCard ein. 2. Drücken Sie sie vorsichtig fest, um eine sichere Verbindung zu gewährleisten.
Zusatzeinrichtungen ExpressCard entfernen ■ Vergewissern Sie sich vor dem Herausnehmen der ExpressCard, dass keine Anwendungen oder Systemdienste auf die Karte zugreifen. ■ Deaktivieren Sie die ExpressCard, bevor Sie sie herausnehmen. Andernfalls kann das System schwerwiegend beschädigt werden. So entfernen Sie eine ExpressCard: 1. Klicken Sie in der Taskleiste auf das Symbol Hardware sicher entfernen. 2. Klicken Sie auf die ExpressCard, die Sie entfernen möchten. 3.
Zusatzeinrichtungen Speicherkarten der folgenden Typen: SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xD Der Computer ist mit einem Kartensteckplatz für verschiedene Speichermedien (Multiple Digital Media Card Slot) ausgestattet, in den Sie eine SD/SDHC/MMC/MEMORY STICK/MEMORY STICK PRO/xDSpeicherkarte einsetzen können. Über diese Karten lassen sich Daten auf einfache Weise von Geräten, die Flash-Speicherkarten verwenden, übertragen.
Zusatzeinrichtungen Speicherkarten installieren So installieren Sie eine Speicherkarte: 1. Setzen Sie die Speicherkarte ein. 2. Drücken Sie sie vorsichtig fest, um eine sichere Verbindung zu gewährleisten. Speicherkarte installieren Achten Sie darauf, die Speicherkarte richtig herum einzusetzen. Falls Windows® die Karte nicht lesen kann, nehmen Sie sie heraus und setzen Sie sie erneut ein. ■ In den Steckplatz für verschiedene digitale Medien können Sie jeweils nur eine Karte einsetzen.
Zusatzeinrichtungen Speicherkarte entfernen ■ Die LED der Speicherkarte darf nicht mehr leuchten, wenn Sie die Karte entfernen oder den Computer ausschalten. Wenn Sie die Karte herausnehmen oder den Computer ausschalten, während er auf die Karte zugreift, können Sie Daten zerstören oder die Karte beschädigen. ■ Entfernen Sie keine Karte, wenn sich der Computer im Schlafmodus oder im Ruhezustand befindet.
Zusatzeinrichtungen 7. Legen Sie Speicherkarten in ihre Box zurück, wenn Sie sie nicht mehr benötigen. 8. Berühren Sie nicht den metallenen Bereich der Medien und vermeiden Sie, dass er feucht oder schmutzig wird. Speichererweiterung Sie können den Arbeitsspeicher des Computers erweitern, indem Sie ein zusätzliches Speichermodul installieren. In diesem Abschnitt wird beschrieben, wie Sie Speichermodule installieren und entfernen. ■ Verwenden Sie nur von TOSHIBA zugelassene Speichermodule.
Zusatzeinrichtungen Speichermodulabdeckung Speichermodul-Abdeckung entfernen 6. Heben Sie eine Seite des Isolierblatts an und setzen Sie die Kontakte des Speichermoduls etwa in einem 45°-Winkel in den Sockel. Drücken Sie das Modul vorsichtig fest, um eine sichere Verbindung zu gewährleisten. Berühren Sie die Anschlüsse des Speichermoduls oder des Computers nicht. Kleine Partikel auf den Anschlüssen können den Zugriff auf das Speichermodul beeinträchtigen. Sockel A ist für den Hauptspeicher reserviert.
Zusatzeinrichtungen 9. Setzen Sie den Akku ein wie in Kapitel 6, Stromversorgung und Startmodi, beschrieben. 10. Schalten Sie den Computer ein und überprüfen Sie, ob der zusätzliche Speicher erkannt wird. Öffnen Sie dazu das Symbol System in der Systemsteuerung und klicken Sie auf die Registerkarte Allgemein.
Zusatzeinrichtungen Laschen 1 2 1 Speichermodul entfernen 6. Setzen Sie die Abdeckung ein und sichern Sie sie mit den Schrauben. Setzen Sie den Akku wieder ein. Zusätzlicher Akku Mit zusätzlichen Akkus können Sie die Mobilität Ihres Computers erhöhen. Wenn kein Netzstrom zur Verfügung steht und die Leistung des Akkus nachlässt, können Sie diesen durch einen vollständig aufgeladenen Akku ersetzen. Lesen Sie dazu Kapitel 6, Stromversorgung und Startmodi.
Zusatzeinrichtungen 3. Schalten Sie den Monitor ein. 4. Schalten Sie den Computer ein. Nach dem Einschalten wird der Windows®-Boot-Bildschirm (das Windows® Logo) auf dem Anzeigegerät angezeigt. Der Windows®-Desktop wird jedoch auf dem Anzeigegerät angezeigt, das beim letzten Ausschalten des PCs aktiv war, sofern dieses beim Einschalten angeschlossen ist. Zum Ändern der Anzeigeeinstellungen drücken Sie Fn + F5.
Zusatzeinrichtungen HDMI (optional) An den HDMI-Ausgang des Computers kann ein HDMI-Monitor angeschlossen werden. Folgende Signalformate werden unterstützt: 1080p, 720p, 576p und 480p. Das Signalformat ist jedoch vom HDMIMonitor abhängig. So schließen Sie den Monitor an: Da die Funktionsfähigkeit des HDMI-Anschlusses nicht mit allen Monitoren getestet werden konnte, können einige HDMI-Monitore möglicherweise nicht verwendet werden. (HDMI=High-Definition Multimedia Interface) 1.
Zusatzeinrichtungen Audioeinstellungen für HDMI Gehen Sie wie nachstehend beschrieben vor, um das Audiogerät für HDMI einzustellen. 1. Klicken Sie auf Start. 2. Klicken Sie auf Systemsteuerung. 3. Klicken Sie auf Hardware und Sound. 4. Klicken Sie auf Sound. 5. Klicken Sie auf Digital Output Device (HDMI). 6. Klicken Sie auf Set Default Device. Gehen Sie wie nachstehend beschrieben vor, um das Audiogerät für den internen Lautsprecher einzustellen. 1. Klicken Sie auf Start. 2.
Zusatzeinrichtungen 3. Wenn Sie Daten über einen IEEE1394-Hub übertragen, schließen Sie während der Datenübertragung keine anderen Geräte an den Hub an und trennen Sie keine Geräte vom Hub. Dadurch könnten Daten zerstört werden. Schließen Sie alle benötigten Geräte an den Hub an, bevor Sie den Computer einschalten. 4. Sie dürfen urheberrechtlich geschützte, von einer Videokamera übertragene Video- oder Musikdaten nur zum persönlichen Gebrauch wiedergeben. 5. Wenn Sie ein i.LINK-Gerät an ein anderes i.
Zusatzeinrichtungen Gerät abtrennen 1. Klicken Sie in der Taskleiste auf das Symbol Hardware sicher entfernen. 2. Klicken Sie auf i.LINK (IEEE1394)-Gerät. 3. Trennen Sie das Kabel zuerst vom Computer, dann vom i.LINK-Gerät ab. Lesen Sie auch die Dokumentation, die Sie mit dem i.LINK-Gerät erhalten haben. Sicherheitsschloss Mithilfe von Sicherheitsschlössern können Sie den Computer an einem Schreibtisch oder einem anderen schweren Gegenstand befestigen, um den Diebstahl des Geräts zu verhindern.
Fehlerbehebung Kapitel 9 Fehlerbehebung TOSHIBA-Computer sind für den Langzeiteinsatz konzipiert. Sollten trotzdem einmal Probleme auftreten, können Ihnen die in diesem Kapitel beschriebenen Vorgehensweisen bei der Fehleranalyse helfen. Jeder Leser sollte sich mit diesem Kapitel vertraut machen. Indem Sie sich potenzielle Probleme bewusst machen, können Sie sie leichter vermeiden.
Fehlerbehebung Erste Überprüfung im Fehlerfall Ziehen Sie zunächst die einfachste Lösung in Betracht. Die hier genannten Punkte sind leicht zu überprüfen; trotzdem können sie zu scheinbar ernsten Problemen führen. ■ Achten Sie darauf, dass vor dem Einschalten des Computers alle Peripheriegeräte eingeschaltet sind. Dazu gehören z. B. Ihr Drucker sowie alle anderen angeschlossenen externen Geräte, die Sie verwenden. ■ Schalten Sie den Computer aus, bevor Sie ein externes Gerät anschließen.
Fehlerbehebung Machen Sie sich Notizen über Ihre Beobachtungen, so dass Sie sie Ihrem Händler beschreiben können. Software Hardware Die Probleme können von Ihrer Software oder dem Datenträger verursacht werden. Falls Sie ein Softwarepaket nicht laden können, kann der Datenträger beschädigt oder das Programm fehlerhaft sein. Versuchen Sie, eine andere Kopie der Software zu laden. Wird bei Verwendung eines Softwarepakets eine Fehlermeldung ausgegeben, schlagen Sie in Ihrer Softwaredokumentation nach.
Fehlerbehebung Systemstart Wenn sich der Computer nicht ordnungsgemäß starten lässt, überprüfen Sie folgende Punkte: ■ Selbsttest ■ Stromquellen ■ Einschaltpasswort Selbsttest Wenn der Computer eingeschaltet wird, läuft der Selbsttest automatisch ab. Auf dem Bildschirm erscheint folgende Anzeige: TOSHIBA Leading Innovation >>> Diese Meldung bleibt einige Sekunden auf dem Bildschirm.
Fehlerbehebung Systemabschaltung wegen Überhitzung Wenn die Temperatur im Innern des Computers zu hoch wird, wechselt das System automatisch in den Ruhezustand oder Sleep-Modus und schaltet sich ab. Wenn der Computer wieder Raumtemperatur hat und immer noch nicht startet, oder wenn er startet und sich gleich wieder abschaltet, wenden Sie sich an Ihren Händler. Netzstrom Wenn sich der Computer bei angeschlossenem Netzadapter nicht einschalten lässt, überprüfen Sie die LED Akku.
Fehlerbehebung Akku Wenn Sie vermuten, dass ein Problem mit dem Akku vorliegt, überprüfen Sie die LED Akku. Informationen zu den LEDs und zur Verwendung des Akkus finden Sie in Kapitel 6, Stromversorgung und Startmodi. Problem Vorgehensweise Akku versorgt den Computer nicht mit Strom Der Akku könnte entladen sein. Schließen Sie den Netzadapter an, um den Akku aufzuladen.
Fehlerbehebung Problem Vorgehensweise Wenn Sie häufig einen erst teilweise entladenen Akku versorgt den Computer nicht so lange Akku wiederaufladen, wird der Akku möglicherweise mit Strom wie erwartet. nicht bis zu seiner vollen Kapazität aufgeladen. Warten Sie, bis der Akku vollständig entladen ist und versuchen Sie erneut, ihn aufzuladen. Überprüfen Sie die Stromverbrauchseinstellungen in den Energieoptionen. Wählen Sie eventuell einen Energiesparmodus.
Fehlerbehebung Echtzeituhr Problem Vorgehensweise Die BIOS-Einstellung und Systemdatum/uhrzeit sind verloren gegangen Der RTC-Akku verfügt nur noch über wenig oder keine Ladung. Sie müssen das Datum und die Uhrzeit im BIOS-Setup wie nachstehend beschrieben einstellen 1. Drücken Sie F2. BIOS Setup wird gestartet. 2. Stellen Sie das Datum unter Systemdatum ein. 3. Stellen Sie die Uhrzeit unter Systemzeit ein. 4. Drücken Sie F10. Eine Bestätigungsmeldung wird angezeigt. 5. Drücken Sie Enter.
Fehlerbehebung Festplattenlaufwerk Problem Vorgehensweise Computer startet nicht von der Festplatte Das Problem könnte mit den Betriebssystemdateien zusammenhängen. Lesen Sie dazu auch die Dokumentation zum Betriebssystem. Computer ist sehr langsam Die Dateien sind eventuell fragmentiert. Führen Sie das Defragmentierungsprogramm aus, um den Zustand der Dateien und der Festplatte zu überprüfen.
Fehlerbehebung Problem Vorgehensweise Einige CDs/DVDs funktionieren problemlos, andere nicht Eventuell verursacht die Software- oder Hardwarekonfiguration Probleme. Überprüfen Sie, ob die Hardwarekonfiguration der Software entspricht. Lesen Sie die CD/DVD-Dokumentation. Überprüfen Sie, welchen CD/DVD-Typ Sie verwenden.
Fehlerbehebung Problem Vorgehensweise Discs werden nicht korrekt gebrannt Wenn es beim Aufzeichnen (Brennen) von CDs zu Problemen kommt, stellen Sie sicher, dass Sie Folgendes beachten: ■ Verwenden Sie nur von TOSHIBA empfohlene Rohlinge. Verwenden Sie während des Schreibvorgangs weder die Maus noch die Tastatur. ■ Verwenden Sie nur die mit dem Computer gelieferte Brennsoftware. ■ Während des Beschreibens dürfen Sie keine andere Software ausführen oder starten.
Fehlerbehebung Problem Vorgehensweise Einige CDs/DVDs funktionieren problemlos, andere nicht Eventuell verursacht die Software- oder Hardwarekonfiguration Probleme. Überprüfen Sie, ob die Hardwarekonfiguration der Software entspricht. Lesen Sie die CD/DVD-Dokumentation. Überprüfen Sie den verwendeten DVD-Typ.
Fehlerbehebung Problem Vorgehensweise Discs werden nicht korrekt gebrannt Wenn es beim Aufzeichnen (Brennen) von CDs zu Problemen kommt, stellen Sie sicher, dass Sie Folgendes beachten: Verwenden Sie nur von TOSHIBA empfohlene Rohlinge. Verwenden Sie während des Schreibvorgangs weder die Maus noch die Tastatur. Verwenden Sie nur die mit dem Computer gelieferte Brennsoftware. Während des Beschreibens dürfen Sie keine andere Software ausführen oder starten.
Fehlerbehebung Problem Vorgehensweise Einige CDs/DVDs/HD DVDs funktionieren problemlos, andere nicht. Eventuell verursacht die Software- oder Hardwarekonfiguration Probleme. Überprüfen Sie, ob die Hardwarekonfiguration der Software entspricht. Lesen Sie die CD/DVD/HD DVDDokumentation. Überprüfen Sie den verwendeten DVD-Typ.
Fehlerbehebung Problem Vorgehensweise Discs werden nicht korrekt gebrannt Wenn es beim Aufzeichnen (Brennen) von CDs zu Problemen kommt, stellen Sie sicher, dass Sie Folgendes beachten: Verwenden Sie nur von TOSHIBA empfohlene Rohlinge. Verwenden Sie während des Schreibvorgangs weder die Maus noch die Tastatur. Verwenden Sie nur die mit dem Computer gelieferte Brennsoftware. Während des Beschreibens dürfen Sie keine andere Software ausführen oder starten.
Fehlerbehebung Problem Vorgehensweise Der Bildschirmzeiger bewegt sich zu schnell oder zu langsam Ändern Sie die Zeigerbeschleunigung in den Mauseigenschaften. 1. Klicken Sie dazu auf , Systemsteuerung, Hardware und Audio und dann auf das Symbol Maus. 2. Klicken Sie im Fenster Mouse Properties auf die Registerkarte Pointer Options. 3. Stellen Sie die Zeigergeschwindigkeit ein und klicken Sie auf OK. Touchpad ist zu empfindlich Regulieren Sie die Berührungsempfindlichkeit des Touchpads. 1.
Fehlerbehebung Problem Vorgehensweise Doppelklicken funktioniert nicht Verändern Sie die Doppelklickgeschwindigkeit im Mausprogramm. 1. Klicken Sie dazu auf , Systemsteuerung, Hardware und Audio und dann auf das Symbol Maus. 2. Klicken Sie im Fenster Mouse Properties auf die Registerkarte Buttons. 3. Stellen Sie die Doppelklickgeschwindigkeit ein und klicken Sie auf OK. Der Bildschirmzeiger bewegt sich zu schnell oder zu langsam Ändern Sie die Zeigerbeschleunigung in den Mauseigenschaften. 1.
Fehlerbehebung USB-Schlaf- und Ladefunktion Problem Vorgehensweise Ich kann die USBSchlaf- und Aufladefunktion nicht verwenden. Möglicherweise ist die USB-Schlaf- und Aufladefunktion deaktiviert. Ändern Sie die Einstellung im HW Setup auf [Aktiviert]. Wenn ein an einen kompatiblen Anschluss angeschlossenes Gerät überladen wird, kann die USB Bus Power-Versorgung (DC 5V) aus Sicherheitsgründen beendet werden.
Fehlerbehebung Problem Vorgehensweise An einen kompatiblen Anschluss angeschlossene externe Geräte funktionieren nicht. Einige externe Geräte funktionieren nicht, wenn sie an einen kompatiblen Anschluss angeschlossen sind und die USB-Schlaf und Aufladefunktion im HW Setup aktiviert ist. Schließen Sie das externe Gerät an, nachdem Sie den Computer eingeschaltet haben.
Fehlerbehebung Audiosystem Lesen Sie auch die Dokumentation zu Ihren Audiogeräten. Problem Vorgehensweise Es wird kein Ton ausgegeben. Prüfen Sie die Lautstärkeeinstellungen der Software. Überprüfen Sie die Kopfhörerverbindung. Lassen sich die Probleme nicht beheben, wenden Sie sich an Ihren Händler. Monitor Weitere Informationen finden Sie auch in Kapitel 8, Zusatzeinrichtungen, und in der Dokumentation zu Ihrem Monitor.
Fehlerbehebung Problem Vorgehensweise Bei einer Anwahl kann keine Verbindung hergestellt werden Überprüfen Sie die Einstellungen der Kommunikationsanwendung. Nach einer Anwahl ist kein Klingelzeichen hörbar Stellen Sie sicher, dass im Kommunikationsprogramm Ton- oder Pulswahl korrekt festgelegt ist. Sie können auch den Befehl ATD verwenden.
Fehlerbehebung Wireless LAN Wenn Sie den LAN-Zugriff mit den folgenden Schritten nicht herstellen können, wenden Sie sich an Ihren LAN-Administrator. Ausführliche Informationen zur drahtlosen Kommunikation finden Sie in Kapitel 4, Grundlagen der Bedienung. Problem Vorgehensweise Zugriff auf das Wireless Vergewissern Sie sich, dass der Schalter für LAN ist nicht möglich drahtlose Kommunikation am Computer auf EIN (ON) steht. Lassen sich die Probleme nicht beheben, wenden Sie sich an den LAN-Administrator.
Fehlerbehebung ExpressCard Lesen Sie dazu auch Kapitel 8, Zusatzeinrichtungen. Problem Vorgehensweise ExpressCard-Fehler Setzen Sie die ExpressCard erneut ein, um sicherzustellen, dass sie fest angeschlossen ist. Vergewissern Sie sich, dass zwischen dem externen Gerät und der Karte eine feste Verbindung besteht. Lesen Sie die Dokumentation zur Karte. Lassen sich die Probleme nicht beheben, wenden Sie sich an Ihren Händler.
Technische Daten Anhang A Technische Daten In diesem Anhang werden die technischen Daten des Computers zusammengefasst. Umgebungsbedingungen Betrieb Außer Betrieb Umgebungstemperatur 5°C bis 35°C -20°C bis 60°C Relative Luftfeuchtigkeit 20 % bis 80 % 10% bis 90% Höhe (über NN) 0 bis 3.000 m -60 bis 10.
Technische Daten Kommunikationsspezifikationen Kommunikationssystem Daten:Vollduplex Fax: Halbduplex Kommunikationsprotokoll Daten ITU-T-Rec (Früher CCITT) Bell Fax: ITU-T-Rec (Früher CCITT) V.21/V.22/V.22bis/V.32/V.32 bis/V.34/V.90/V.92 103/212A V.17/V.29/V.27ter/ V.21 ch2 Kommunikationsgeschwindigkeit Datenübertragung und Datenempfang 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Datenempfang nur mit V.
Grafikadapter und Anzeigemodi Anhang B Grafikadapter und Anzeigemodi Grafikadapter Der Grafikadapter übersetzt Softwarebefehle in Hardwarebefehle, um bestimmte Bildpunkte ein- oder auszuschalten. Der Adapter ist ein erweiterter Video Graphics Array (VGA)-Adapter, der Super VGA (SVGA) und Extended Graphics Array (XGA) für den eingebauten LCD-Bildschirm und externe Monitore unterstützt. Ein an den Computer angeschlossener hochauflösender, externer Monitor kann bis zu 2048 x 1536 Pixel bei bis zu 16 Mio.
Grafikadapter und Anzeigemodi Anzeigemodi Der Computer unterstützt die in der folgenden Tabelle aufgeführten Anzeigemodi. Wenn Sie von Ihrer Software aufgefordert werden, einen Modus anhand von Nummern auszuwählen, die nicht mit denen in der Tabelle übereinstimmen, wählen Sie einen Modus anhand der Auflösung, der Anzahl der Farben und der Auffrischungsrate.
Wireless LAN Anhang C Wireless LAN Kartenspezifikationen Formfaktor Mini PCI Typ III Kompatibilität ■ IEEE 802.11-Standard für Wireless LANs ■ Wi-Fi-(Wireless Fidelity-)zertifiziert durch die Wi-Fi Alliance. Das „Wi-Fi CERTIFIED“-Logo ist eine Zertifizierungsmarke der Wi-Fi Alliance. Netzwerkbetriebssystem ■ Microsoft® Windows® Networking Medienzugriffsprotokoll ■ CSMA/CA (Collision Avoidance) mit Acknowledgement (ACK) Datenraten ■ 54/48/36/24/18/12/9/6 Mbit/s (IEEE 802.
Wireless LAN Funkmerkmale Die Funkeigenschaften von Wireless LAN-Karten können in Abhängigkeit von den folgenden Punkten variieren: ■ Land/Vertriebsgebiet, in dem das Produkt erworben wurde ■ Produkttyp Die drahtlose Kommunikation unterliegt häufig den nationalen Vorschriften für den Funkverkehr.
Wireless LAN Unterstützte Frequenzbänder Entsprechend den in im jeweiligen Land/Vertriebsgebiet geltenden Bestimmungen für den Funkverkehr unterstützt Ihre Wireless LAN-Karte möglicherweise einen anderen Satz von 2,4-GHz-Kanälen. Fragen Sie Ihren autorisierten Wireless LAN- oder TOSHIBA-Händler nach Informationen über die Funkbestimmungen Ihres Landes/Gebietes. Kanalsätze für die drahtlose Kommunikation nach dem IEEE 802.11Standard (Revision B, G und Entwurf N) Frequenzbereich Kanal-ID 2400-2483.
Netzkabel und Netzstecker Anhang D Netzkabel und Netzstecker Der Stecker des Netzkabels muss mit dem Steckdosentyp des jeweiligen Landes/Gebietes kompatibel sein. Das Netzkabel muss die Normen des Landes/Gebietes erfüllen, in dem es verwendet wird.
Netzkabel und Netzstecker In den USA und Kanada ist die Steckerkonfiguration 2-15P (250 V) oder 1-15P (125 V) gemäß U.S. National Electrical Code Handbook und Canadian Electrical Code Part II definiert. Die folgenden Abbildungen zeigen die Steckerformen für die USA und Kanada, Großbritannien und Europa.
Rechtliche Hinweise Anhang E Rechtliche Hinweise In diesem Kapitel werden rechtliche Hinweise, die für TOSHIBA-Computer gelten, aufgeführt. In diesem Handbuch wird *XX verwendet, um zu kennzeichnen, welche rechtlichen Hinweise sich auf TOSHIBA-Computer beziehen. Beschreibungen, die sich speziell auf diesen Computer beziehen, sind im Handbuch mit *XX in blauer Schrift gekennzeichnet. Klicken Sie auf *XX, um die jeweilige Beschreibung anzuzeigen.
Rechtliche Hinweise ■ bei Verwendung des Computers unter Temperaturbedingungen außerhalb des Bereichs von 5°C und 30°C bzw. über 25°C in großen Höhen (Alle Werte sind ungefähr und variieren je nach Computermodell. Weitere Informationen finden Sie im Benutzerhandbuch oder auf der Toshiba-Website unter http://www.pcsupport.toshiba.com.) Auch Änderungen der Gerätekonfiguration können dazu führen, dass die CPU-Leistung von den Spezifikationen abweicht.
Rechtliche Hinweise Lebensdauer des Akkus Die Lebensdauer des Akkus kann je nach Modell, Konfiguration, Anwendungen, Energieverwaltungseinstellungen und verwendeten Funktionen erheblich variieren, dazu tragen auch die normalen Leistungsschwankungen aufgrund der Bauweise einzelner Komponenten bei. Die angegebenen Zeiten für die Akkulebensdauer wurden bei Tests von TOSHIBA zum Zeitpunkt der Veröffentlichung auf bestimmten Modellen unter bestimmten Konfigurationen erzielt.
Rechtliche Hinweise Wireless LAN Die Übertragungsgeschwindigkeit und die Reichweite des Wireless LAN kann variieren. Sie hängt von folgenden Faktoren ab: elektromagnetische Umgebung, Hindernissen, Aufbau und Konfiguration des Zugangspunktes sowie Aufbau des Clients und Software/Hardware-Konfiguration. [54 Mbit/s ist das theoretische Maximum unter dem IEEE802.11 (a/b/g)Standard.] Die tatsächliche Übertragungsgeschwindigkeit liegt unter dem theoretischen Maximum.
Falls Ihr Computer gestohlen wird Anhang F Falls Ihr Computer gestohlen wird Achten Sie immer gut auf Ihren Computer, um einen Diebstahl zu verhindern. Dieses wertvolle technische Gerät hat eine hohe Anziehungskraft auf Diebe, deshalb sollten Sie es besonders an öffentlichen Plätzen immer im Auge behalten. Mit optional erhältlichen Diebstahlsicherungen können Sie Ihr Notebook an schweren Gegenständen befestigen und die Diebstahlgefahr verringern.
Falls Ihr Computer gestohlen wird TOSHIBA Diebstahlregistrierung An: Fax: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr. 2 93055 Regensburg Deutschland +49 (0) 941 7807 921 Land, in dem der Computer gestohlen wurde: Modell: (z. B. P300/P300D) Modellnummer: (z.B. PSA50 YXT) Seriennummer: (z. B.
Glossar Glossar In diesem Glossar werden die im Handbuch verwendeten Begriffe erläutert. Alternativbezeichnungen dienen zu Referenzzwecken.
Glossar HDD: Hard Disk Drive HD DVD: High Definition DVD HDCP: High-Bandwidth Digital Content Protection HDMI: High Definition Multimedia Interface HDMI-CEC: High Definition Multimedia Interface Consumer Electronics Control IDE: Integrated Drive Electronics IEEE: Institute of Electrical and Electronics Engineers IMSM: Intel Matrix Storage Manager I/O: Input/Output IRQ: Interrupt Request KB: Kilobyte LAN: Local Area Network LCD: Liquid Crystal Display LED: Light Emitting Diode MB: Megabyte MMC: Multi Media
Glossar A AACS: Ein Standard für den Kopierschutz für HD DVDs (Kopieren und Ausgabe). Adapter: Ein Gerät, das den Anschluss zweier Einheiten ermöglicht. Beispiel: Der interne Display Adapter des Computers empfängt Informationen von der Software und übersetzt sie in Bilder auf dem Bildschirm. Bei einem Adapter kann es sich beispielsweise um einen Mikroprozessor oder einen einfachen Anschluss handeln. Ein intelligenter Adapter (der Daten verarbeiten kann) wird auch als Controller bezeichnet.
Glossar Ausgabe: Die ausgegebenen Ergebnisse einer Computeroperation. Unter Ausgaben versteht man im Allgemeinen Daten, die 1) auf Papier gedruckt, 2) auf einem Bildschirm angezeigt, 3) über den seriellen Modemausgang übertragen oder 4) auf einem Datenträger gespeichert werden. B Backup: Kopie einer Datei (in der Regel auf einem austauschbaren Datenträger) für den Fall, dass die Originaldatei verloren geht oder beschädigt wird.
Glossar Bootfähige Diskette: Siehe Systemdiskette. Bus: Eine Schnittstelle zur Übertragung von Signalen, Daten oder elektrischer Energie. Byte: Repräsentiert ein Zeichen. Folge von acht Bits, die als Einheit behandelt werden; gleichzeitig die kleinste adressierbare Einheit innerhalb des Systemspeichers. C Cache-Speicher: Sehr schneller Speicherbereich, in dem häufig verwendete Informationen für den schnellen Zugriff dupliziert werden.
Glossar Controller: Eingebaute Hardware und Software, die die Funktionsweise eines bestimmten internen oder peripheren Geräts steuert (z. B. der Tastatur-Controller). CPU: Central Processing Unit (zentrale Recheneinheit). Der Teil des Computers, der Anweisungen interpretiert und ausführt. CRT: Cathode Ray Tube (Kathodenstrahlröhre). Eine Vakuumröhre, bei der Elektronenstrahlen durch Abtasten eines mit fluoreszierendem Material beschichteten Bildschirms ein Bild erzeugen.
Glossar Dokumentation: Die Handbücher und/oder sonstigen schriftlichen Anleitungen für den Benutzer eines Computers oder einer Anwendung. Die Dokumentation für ein Computersystem umfasst in der Regel Verfahrens- und Lernunterlagen sowie Unterlagen über die Systemfunktionen. doppelklicken: Zweimal kurz auf die primäre Taste des Zeigegeräts drücken, ohne das Zeigegerät zu bewegen. Im WindowsBetriebssystem ist dies die linke Taste des Zeigegeräts (sofern nicht anders angegeben).
Glossar Escape Guard Time: Der Zeitraum vor und nach dem Senden eines Escape-Codes an das Modem, der zwischen „Escape“ als Teil der übertragenen Daten und „Escape“ als Befehl an das Modem unterscheidet. Escape: 1) Ein Code (ASCII-Code 27), der dem Computer mitteilt, dass Befehle folgen, und mit peripheren Geräten wie Druckern und Modems verwendet wird. 2) Abbrechen der momentan ausgeführten Aufgabe.
Glossar formatieren: Vorbereiten eines Datenträgers für die erste Verwendung. Beim Formatiervorgang wird eine Struktur erzeugt, die das Betriebssystem benötigt, um Dateien oder Programme auf den Datenträger zu schreiben. Funktionstasten: Die Tasten F1 bis F12, die zur Ausführung bestimmter Funktionen betätigt werden. G Gehäuse: Die äußere „Hülle“ des Computers. Gerätetreiber: Programm („Treiber“), mit dem ein Computer mit einem Gerät kommunizieren kann.
Glossar I i.LINK (IEEE1394): Dieser Anschluss ermöglicht die Datenübertragung mit hoher Geschwindigkeit direkt von einem externen Gerät wie z. B. von einer digitalen Videokamera. I/O: Input/Output, Ein-/Ausgabe. Bezieht sich auf den Datentransfer vom und zum Computer. I/O-Geräte: Geräte für die Kommunikation mit dem Computer und für den Datentransfer vom und zum Computer.
Glossar Komponenten: Die Elemente oder Teile (eines Systems), die das ganze System bilden. Konfiguration: Die einzelnen Komponenten des Systems (Eingabegerät, Drucker, Laufwerke etc.) und die Einstellungen der Arbeitsweise des Systems. Sie können das System mit dem Programm HW Setup konfigurieren. L L1-Cache: Level One Cache. Speicher-Cache im Prozessor für eine schnellere Verarbeitungsgeschwindigkeit. Siehe auch CacheSpeicher, L2-Cache.
Glossar M Megabyte (MB): Eine Einheit der Datenspeicher, die 1024 Kilobyte entspricht. Siehe auch Kilobyte. Megahertz: Eine Maßeinheit für die Wellenfrequenz, die einer Million Zyklen pro Sekunde entspricht. Siehe auch Hertz. Menü: Eine Liste von Optionen, die auf dem Bildschirm angezeigt werden. Manchmal auch als Bildschirm oder Seite bezeichnet. Mikroprozessor: Eine Hardwarekomponente, die in Form eines einzelnen Chips Anweisungen ausführt.
Glossar O OCR: Optical Character Recognition (Reader). Optische Zeichenerkennung bzw. optisches Lesegerät. Ein Verfahren, bei dem mit Hilfe eines bestimmten Geräts (auf Laser- oder Lichtbasis) geschriebene Zeichen (auf Papier o. Ä.) in den Computer eingelesen und identifiziert werden können. Online-Modus: Betriebszustand eines Peripheriegerätes, wenn es aktiviert und bereit ist, Daten zu empfangen oder zu übertragen.
Glossar Platine: Eine Leiterplatte, auch „Board“ genannt. Eine interne Karte mit elektronischen Komponenten, Chips genannt, die bestimmte Funktionen erfüllen oder die Leistungsfähigkeit des Systems erhöhen. Plug and Play: Ein Merkmal von Windows, wodurch das System den Anschluss von externen Geräten automatisch erkennt und die erforderlichen Einstellungen am Computer vornimmt. Power Saver: Ein TOSHIBA-Dienstprogramm, mit dem sich Parameter verschiedener Energiesparfunktionen einstellen lassen.
Glossar S S/P DIF: Ein Standard für eine digitale Audioschnittstelle. Schnittstelle: 1) Hardware- oder Softwarekomponenten, die speziell zum Anschließen eines Systems oder Geräts an ein anderes verwendet werden. 2) Eine physische Verbindung von einem System oder Gerät zu einem anderen, sodass Informationen ausgetauscht werden können. 3) Die Elemente, die es dem Benutzer ermöglichen, mit dem Computer und der Anwendung zu interagieren, z. B. die Tastatur oder Menüs.
Glossar Standard (einstellung): Die Werte oder Optionen, die vom System automatisch gewählt werden, wenn der Benutzer oder das Programm keine Werte eingibt. Auch als voreingestellter Wert bezeichnet. Stoppbit: Ein oder mehr Bits eines Bytes, die in der asynchronen seriellen Kommunikation nach einem übertragenen Zeichen folgen oder Codes gruppieren. Symbol: Eine kleine grafische Darstellung auf dem Bildschirm oder der LED-Leiste.
Glossar V VGA: Video Graphics Array; Grafikadapter nach Industriestandard, mit dem jede gebräuchliche Software verwendet werden kann. W Warmstart: Neustart (Reset) des Computers, ohne ihn auszuschalten. Wechselstrom: Elektrischer Strom, der seine Fließrichtung in regelmäßigen Intervallen ändert. Wi-Fi®: Eine eingetragene Marke der Wi-Fi Alliance, die für Wireless Fidelity steht. Wi-Fi® umfasst ein Kommunikationsprotokoll, mit dem eine Ethernet-Verbindung drahtlose Kommunikationskomponenten verwenden kann.
Index Index A B Akku, 1-4 aufladen, 6-7 Echtzeituhr, 1-4, 6-4 Energiesparmodus, 1-13 ersetzen, 6-11 LED, 6-1 Position, 2-6 sicherer Umgang mit der Batterie, 6-5 Typen, 6-3 Überwachen der Kapazität, 6-9 Verlängern der AkkuLebensdauer, 6-10 zusätzlicher, 8-10 Anschlüsse, 1-9 externer Monitor, 1-9 USB, 1-9 Anzeigemodi, B-2 ASCII-Zeichen, 5-5 Audiosystem, 1-10 Kopfhörer-/S/P DIF-Buchse, 1-10 Mikrofonbuchse, 1-10 Ton aus-Hotkeys, 5-3 Bildschirm automatische Anschaltung, 1-12 Helligkeit erhöhen, 5-3 Helligkei
Index Fn + F8 (Drahtlose Kommunikation), 5-4 Fn + F9 (Touchpad), 5-4 Fn-Einrastfunktion, 5-4 Funktionstasten, 5-2 G Gerät ausschalten, 3-5 einschalten, 3-5 Grafik Adapter, 1-9 Grafikadapter, 1-9 H HW Setup, 1-15 L LAN, 1-11, 4-41 abtrennen, 4-42 anschließen, 4-41 Kabeltypen, 4-41 LCD, 1-9 M Modem, 1-10, 4-33 abtrennen, 4-36 anschließen, 4-35 Gebietsauswahl, 4-34 Menü „Eigenschaften“, 4-34 Monitor, externer, 1-9, 8-10 N Netzadapter, 1-4 anschließen, 3-3 zusätzlicher, 1-18 Neustarten des Computers, 3-9
Index S T Schalter für die drahtlose Kommunikation LED, 4-40 Schalter für drahtlose Kommunikation, 4-40 Sicherheitsschloss anbringen, 8-15 Sleep-Modus, 1-14 automatische Aktivierung, 1-13 Einstellung, 3-6 Softkeys Emulieren von Tasten der erweiterten Tastatur, 5-2 ScrLock, 5-2 Speicher, 1-3 entfernen, 8-9 Erweiterung, 1-18, 8-7 installieren, 8-7 Startmodi, 6-13 Stromversorgung Automatische Systemabschaltung, 6-14 Bedingungen, 6-1 Beenden-Modus (Boot-Modus), 3-6 LCD-gesteuerte Ein-/ Ausschaltung, 1-13, 6-