Network Router User Manual

44
13.4 Point Monitor Page
The Point Monitor page can be accessed by clicking on the “Point Monitor” tab
located at the top of the browser window. Refer to Figure 23 for a screen shot
of the Point Monitor Page.
Figure 23: Embedded Web Server - Point Monitor Page
This page provides a monitor and control interface for the ETH-100’s point
database. Use the “channel select” drop down box to select the ASD channel
to be monitored. The displayed point values are then updated every 1 second.
The “value” field may indicate an error code if a problem occurs. A flyout list of
error codes and their meanings can be accessed by clicking the “Error Codes”
button at the bottom of the screen (Refer to Figure 24).
Values may be interactively changed at any time. To change a point’s value,
click on the “value” field of the point you wish to edit. This will open the point
for editing (Refer to Figure 24). Change the point’s value to the desired value
and click the “upload” button (the icon with three blue arrows). You may
cancel changes at any time by clicking the “cancel” button (the red “X” icon).
Notice again that the “dec” and “hex” buttons will change the radix of the
entered value. Always ensure that any values you may enter are appropriate
for the selected radix.