Instruction Manual

EN-20 User’s Manual
TOSHIBA Express Port Replicator II
2. Press the Eject button on the port replicator. The Docked light will turn
off.
(Sample Illustration) Eject button on the port replicator
3. After the Docked light on the port replicator turns off, pull the Eject lever
towards you while sliding the computer backwards.
To avoid damaging the hooks on the port replicator, do not lift up the
computer without sliding the computer backwards.
(Sample Illustration) Disconnecting a computer from the port replicator
4. Lift the computer off of the port replicator.
Securing your computer and port replicator
The security lock slot enables you to connect a security cable (not
provided) to help prevent unauthorized removal of the port replicator. When
a security cable is properly attached to the port replicator and the computer
lock switch is set to the locked position, the Eject lever cannot be operated.
This helps prevent unauthorized removal of your computer from the port
replicator.
There are two positions for the computer lock.
Back: You can disconnect the computer from the port replicator.
Forward: You cannot disconnect the computer from the port replicator.
Eject button
Docked light
Eject lever