user manual
Table Of Contents
- Introduction
- Connecting Your TV
- Overview of cable types
- Connecting a VCR, antenna, cable TV, or camcorder
- Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream® or VCR
- Connecting an HDMITM or DVI device to the HDMITM input
- HDMITM CEC connection
- Connecting a digital audio system
- Connecting an analog audio system
- Connecting a computer
- Using the Remote Control
- Menu Layout and Navigation
- Setting up your TV
- Setting up your TV
- Selecting the video input source
- Labeling the video input sources
- Tuning channels using the Channel Browser
- Favorites browser
- Selecting the picture size
- Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
- Using the Auto Aspect feature
- Using the 4:3 Stretch
- Using the FREEZE feature
- Adjusting the picture
- Using closed captions
- Adjusting the audio
- Selecting the PIN code
- Using parental controls (for USA region)
- Using the input lock feature
- Locking channels
- Using the PC settings feature
- Using the Media Player
- Setting the sleep timer
- No Signal Power Down
- Using HDMITM CEC
- Using the HDMITM settings feature
- Using the HDMITM settings feature
- Displaying TV status information
- Understanding the last mode memory feature
- Using the TV’s Advanced Features
- Troubleshooting
- Specifications
- License Agreement
34
Connecting Your TV
Connecting a digital audio system
(Sample Illustration) 58L1350U—HDMI
TM
CEC compatible audio
receiver and playback device connections
To connect an HDMI
TM
device, you will need one HDMI
TM
cable
(type A connector) per HDMI
TM
device (see “Overview of cable
types” on page 23)
v If several devices are connected, HDMI
TM
CEC Control feature
may not operate properly.
v For proper operation, it is recommended that you use an HDMI
TM
cable with the HDMI
TM
Logo ( ).
Before controlling the device(s):
v After completing the above connections, congure the HDMI
TM
CEC Setup menu with the desired settings, see “Setting up
HDMITM CEC” on page 101
v The connected devices must also be congured. For details, see
the operation manual for each device.
v This feature uses the CEC technology as regulated by the
HDMI
TM
standard.
v This feature is limited to models incorporating Toshiba’s
HDMI
TM
CEC. However, Toshiba is not liable for those
operations. Refer to the individual instruction manuals for
compatibility information.
This feature may not work properly depending on the devices that are
connected.
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
®
Digital decoder or other
HDMI
TM
Side panel
Audio Receiver
Playback device (HDMI
CEC DVD Player, etc.)
TM
Playback device (HDMI
CEC DVD Player, etc.)
TM