user manual
Table Of Contents
- Introduction
- Connecting Your TV
- Overview of cable types
- Connecting a VCR, antenna, cable TV, or camcorder
- Connecting a Blu-ray™ / DVD player, satellite receiver with ColorStream® or VCR
- Connecting an HDMITM or DVI device to the HDMITM input
- HDMITM CEC connection
- Connecting a digital audio system
- Connecting an analog audio system
- Connecting a computer
- Using the Remote Control
- Menu Layout and Navigation
- Setting up your TV
- Setting up your TV
- Selecting the video input source
- Labeling the video input sources
- Tuning channels using the Channel Browser
- Favorites browser
- Selecting the picture size
- Scrolling the TheaterWide® picture (TheaterWide 2 and 3 only)
- Using the Auto Aspect feature
- Using the 4:3 Stretch
- Using the FREEZE feature
- Adjusting the picture
- Using closed captions
- Adjusting the audio
- Selecting the PIN code
- Using parental controls (for USA region)
- Using the input lock feature
- Locking channels
- Using the PC settings feature
- Using the Media Player
- Setting the sleep timer
- No Signal Power Down
- Using HDMITM CEC
- Using the HDMITM settings feature
- Using the HDMITM settings feature
- Displaying TV status information
- Understanding the last mode memory feature
- Using the TV’s Advanced Features
- Troubleshooting
- Specifications
- License Agreement
79
Setting up your TV
Adjusting the audio
2 Highlight MTS, and then press the ENTER button.
3 Select Stereo, and then press the ENTER button.
v You can typically leave the TV in Stereo mode because it outputs
the type of sound being broadcast (stereo or monaural).
v If the sound is noisy, select Mono to reduce the noise.
To listen to an alternate language on an ATSC digital station (if
available), highlight the Primary Audio Language eld in step 2
above, and then press the ◄/►(arrow) buttons to select the
language you prefer.
To listen to a second audio program on an analog station, if
available, select SAP in step 2 above.
v A second audio program (SAP) can be heard only on those TV
stations that offer it. For example, a station might broadcast
another language as a second audio program. If you have SAP
on, you will see the current program on the screen but hear the
other language instead of the program’s normal audio.
v If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal audio
will be output. However, occasionally there is no sound at all in
SAP mode. If this happens, set the MTS feature to Stereo mode.
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble and
balance.
To adjust the audio quality:
1 Press the MENU button and open the Sound menu.
2 Press the ▲/▼(arrow) buttons to highlight the item you wish to
adjust (Bass, Treble, or Balance), and then press the ENTER
button.
3 Press the ◄/►(arrow) buttons to adjust the level.
v ◄ makes the bass or treble weaker or increases the balance
in the left channel (depending on the item selected).
v ► makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).