User Guide

Network Setting Checklists 45
Network Setting Checklists
When a computer cannot print data to this equipment through a network, check if the settings
are correctly made according to Chapter 1 “EASY SETUP FLOW” by referring to the checklists
shown below. The checklist covers major printing setting items explained in Chapter 1 “EASY
SETUP FLOW”.
Raw TCP or LPR printing in a Windows operating system environment:
IPP printing in a Windows operating system environment:
No. Check Item Yes No Countermeasure
1 Are the IP Address proper-
ties correctly set?
Next Step
Ø
Ö
Set up the IP address correctly.
2 Is the Raw TCP Printing
correctly set?
Next Step
Ø
Ö
Set up the Raw TCP print service
correctly.
3 Is the LPR/LPD Printing cor-
rectly set?
Next Step
Ø
Ö
Set up the LPD print service cor-
rectly.
4 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
5 Is the Raw TCP or LPR port
configured with correct IP
address?
Next Step
Ø
Ö
See the Printing Guide to config-
ure the proper port.
6 Can you print to this equip-
ment?
End Ö
Refer to the following section to
troubleshoot the condition.
 P.55 “Cannot print data to this
equipment”
No. Check Item Yes No Countermeasure
1 Are the IP Address proper-
ties correctly set?
Next Step
Ø
Ö
Set up the IP address correctly.
2 Is the HTTP Server on this
equipment enabled?
Next Step
Ø
Ö
Enable the HTTP server in the
HTTP Network Service.
3 Is the IPP Printing correctly
set?
Next Step
Ø
Ö
Set up the IPP print service cor-
rectly.
4 Were the proper printer driv-
ers installed?
Next Step
Ø
Ö
See the Printing Guide to install
proper printer drivers.
5 Is the IPP port configured
with correct URL?
Next Step
Ø
Ö
See the Printing Guide to config-
ure proper port.
6 Can you print to this equip-
ment?
End Ö
Refer to the following section to
troubleshoot the condition.
 P.55 “Cannot print data to this
equipment”