Introduction Preparations PORTABLE TV/DVD PLAYER TV viewing SD-P120DTKE Playback OWNER’S MANUAL Function Settings DIGITAL VIDEO Connections Others N SD-P120DTKE_ENG_01-68.
Introduction SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. CAUTION: This equipment employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference.
Model No. Introduction In the spaces provided below, record the Model and Serial No. located on the back of your player. Serial No. Retain this information for future reference. About disposal The cold cathode fluorescent lamp in the LCD panel contains a small amount of mercury. Please follow local ordinances or regulations when you dispose of the product.
Introduction SAFETY PRECAUTIONS Location of the required label Following information is only for EU-member states: The use of the symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
IMPORTANT SAFETY INSTRUCTIONS This unit is fully transistorized and does not contain any parts that can be repaired by the user. DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7.
Introduction IMPORTANT SAFETY INSTRUCTIONS ADDITIONAL SAFETY INSTRUCTIONS 13. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 19. Do not rest the product on your lap or other parts of body. The product may become warm during use. Even low temperatures may cause personal injury when exposed to your skin for prolonged periods. 14.
25. Use the player in a location that facilitates the immediate removal of the plug if there is a malfunction or failure. 26. Do not allow children to scratch, lick or put the memory card into their mouth. Keep the memory card out of the reach of children. Injury to the child or malfunction may result. 27. Battery Pack (Lithium ion battery pack) a) Never throw the battery pack into a fire, as that could cause the battery pack to explode.
Introduction IMPORTANT SAFETY INSTRUCTIONS g) Never dispose of used battery packs with other ordinary solid wastes, since they contain toxic substances. Always dispose of used battery packs in accordance with community regulations that apply to the disposal of batteries. Cover the metal terminals with insulating tape, in order to prevent accidental short-circuiting. h) Always confirm that the battery pack is compatible with your player, before attaching the battery pack to the player.
Introduction 29. After unpacking coin-shaped batteries, store them in poly bags, etc. separately one by one when unused. If you leave them unwrapped, they may be shortcircuited by contact with metal objects, resulting in battery leakage, heat or bursting. This may cause burns or injury. The batteries must be completely discharged when they are deposited in collection containers for old batteries. If a charge remains, countermeasures to prevent short circuits must be taken. 30.
Introduction Precautions Notes on handling Do not shock the LCD monitor. It may cause unit damage and malfunction. Do not use the player in a place subject to vibration. Neglecting this may cause malfunction of the player or damage to the disc. Do not leave the player in a vehicle. Rise or drop in temperature may result in malfunction of the player. When transporting the player, the original shipping carton and packing materials come in handy.
Moisture condensation damages the player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the player. Do not use the player when moisture condensation may occur. If you use the player in such a situation, it may damage discs and internal parts.
Introduction Precautions (Continued) Notes on products incorporated laser system This product incorporates laser system. For proper and safe use of this product, read this owner’s manual carefully, and keep near at hand for future reference. When you need any repair of this product, consult the dealer where you purchased this product. Never disassemble or modify this product. Changes or modifications may result in exposure to laser radiation. Notes on region numbers The region number of this player is 2.
Toshiba is not liable for any damage caused by fires, earthquake, etc., uses by a third person, accidents, owner’s intentional or unintentional misuse, or uses in other improper conditions. Introduction Exemptions Toshiba is not liable for incidental damages (such as profit loss or interruption in business, modification or erasure of record data, etc.) caused by use or inability to use of this product.
Introduction Table of contents Introduction TV viewing SAFETY PRECAUTIONS ..................................... 2 Preparation for TV viewing ................................ 38 IMPORTANT SAFETY INSTRUCTIONS .............. 5 TV view operations ............................................. 40 Precautions ........................................................ 10 System settings .................................................. 45 Identification of Controls ..................................
Skipping chapters or tracks ................................. 54 Locating by entering numbers ............................. 54 Marking the desired position to locate (Bookmark function)..............................................55 Function Settings Customizing the function settings.................... 70 Connections Playing in random order .................................... 56 Viewing on a connected TV ............................... 78 Playing repeatedly ..........................................
Identification of Controls Introduction Instructions and actual buttons Most instructions are based on remote control operation, unless otherwise noted. You can use the buttons on the remote control and those on the main unit as well when they have the same function. Some functions are available only from the remote control. Main Unit See page in for details.
Right side Antenna jack 28 To connect an aerial HDMI terminal 79 Connect to HDMI output terminal of your HDMI equipment AV in jack 80 Connect to AV output terminal of your video equipment AV out jack 78 Connect to AV input terminal of your TV BITSTREAM/PCM jack 81 Connect to Digital input terminal of your amplifier Introduction Left side Disc slot 48 To insert a disc to play EJECT button 48 To remove a disc from the disc slot POWER button 33 Headphone jack 49 To connect a headphone To turn on or off t
Identification of Controls (Continued) Introduction Remote control See page in for details. EPG button* 40 - TELETEXT button* 41 POWER button 33 2 EJECT button 48 MUTE button* 40 EXIT button* 40 .
Accessories Remote control (MEDR120BX) Coin-shaped battery (CR2025) Audio/video cable Power cord* AC adapter (EADP-60EB A)* Battery pack* (SD-PBP120E) Headphones Outdoor aerial Owner’s manual Introduction Check that the following accessories are supplied. * Do not use an AC adapter, a power cord, and a battery pack other than one specified. Also, do not use these supplied accessories with any device other than this player. 19 SD-P120DTKE_ENG_01-68.
Introduction Notes and Information Playable discs This player can play the following discs. Disc Disc Mark Disc Size Contents • Video (moving pictures)+Audio DVD Video disc 12cm DVD-RW 12cm • Video+Audio (DVD VR format (compatible with CPRM)/DVD video format)* *Finalized discs only. • Movie (DivX) DVD-R 12cm • Video+Audio (DVD VR format (compatible with CPRM)/DVD video format)* *Finalized discs only.
On VIDEO CDs This player supports VIDEO CDs equipped with the PBC (Version 2.0) function. (PBC is an abbreviation for Playback Control.) You can enjoy two playback variations depending on types of discs. Introduction Notes • You cannot play discs other than those listed on the previous page. • You cannot play discs of DVD-RAM or non-standardized discs, etc., even if they may be labeled as those on the previous page.
Introduction Notes and Information (Continued) On handling discs Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping. Do not touch the playback side of the disc. Do not attach paper or tape to discs. Playback side On cleaning discs Fingerprints and dust on the disc may cause picture and sound deterioration. Wipe the disc from the centre outwards with a soft cloth. Always keep the disc clean.
Card Card Mark Contents SD Memory Card Multi Media Card Memory Stick • Audio (MP3) • Photograph (JPEG) xD-Picture Card • Audio (MP3) • Photograph (JPEG) • Audio (MP3) • Photograph (JPEG) • Audio (MP3) • Photograph (JPEG) • SD is a trademark. • MMC and MultiMediaCard are trademarks of Infineon Technologies AG and licensed to MMCA (MultiMediaCard Association). are trademarks of Sony • “Memory Stick” and Corporation. or xD-Picture CardTM is a trademark of Fuji • Photo Film Co. Ltd.
Introduction Notes and Information (Continued) 24 Notices for use Ensure that you insert the memory card correctly into this player. Do not eject the memory card while it is in use. If ejected while in use information on the memory card may be lost. This memory card is a precision electrical instrument. Do not bend, drop or apply strong force to it. Do not use or store the memory card in an environment of high static electricity or electrical interference.
Preparations Preparations before using. ● Preparation of the remote control ● Installation ● Antenna connection ● Power connection ● Using the battery pack ● Powering on/off ● Changing the mode ● Using “Quick Menu” SD-P120DTKE_ENG_01-68.
Preparation of the remote control Preparations Insert the specified battery in the remote control. See page 8 , 9 for safe use of coin-shaped batteries. 1 Gently insert a fingernail in groove 1 and pull out the holder in direction 2. Operating with the remote control Point the remote control at the remote sensor at a right angle to the LCD and press the buttons. Backside 1 2 Take care not to break your fingernail. Within about 3 m (9.
Installation Read page 5 - 10 to secure a safe position. Open the stand. Caution • Be sure to open the stand whenever using the player. Neglecting this may cause the player to topple, resulting in personal injury and/or malfunction of the player. • Do not lift or carry the player by the stand. • Hold the handle when moving the player. Install on a smooth, level surface. Preparations Handle Keep this strap stretched. Notes • Be careful not to damage the LCD when moving the player.
Antenna connection When poor broadcast reception due to inclement weather or other reasons, the picture or sound may be affected and video noise or audio noise may occur. Also depending on your location, the broadcast reception signal may fail. Preparations Aerial Aerial cable (not supplied) The tip of the outdoor aerial is sharp and can inflict injury such as puncture wounds. Be careful when handling it. Connect either. CAUTION • Keep the supplied outdoor leads away from children.
Power connection Connect the supplied AC adapter to wall outlet as below. Preparations CAUTION • Do not connect the power plug to a power outlet other than that indicated on the label, as this can result in a risk of fire or electric shock. • Do not connect or disconnect the power plug with wet hands. Doing so may cause electric shock. • Do not use an AC adapter other than one specified, as it can cause a fire or damage to the player. • When the AC adapter is in use, its temperature may increase.
Using the battery pack Preparations The supplied battery pack (lithium ion battery pack) can power the player for operation outdoors or in a place with no outlets. WARNING • Do not use a battery pack other than one specified as it can result in a fire or damage to the unit. • Do not heat, open, or short-circuit the battery pack. Do not throw the battery pack into a fire. Doing so may cause an explosion or a fire. • Attach the battery pack properly following the explanation below.
■ Charging the battery pack The battery pack needs to be charged before use. (The battery indicator is shown in the upper left corner of the screen when the power in the battery pack is running low.) Perform a full charge before the first use. 1 Turn off the player. The battery pack cannot be charged when the player is on. Be sure to turn off the player before charging the battery pack. 2 Attach the battery pack to the player. 3 Connect the supplied AC adapter and the power cord only to the player.
Using the battery pack (Continued) ■ Detaching the battery pack Preparations 1 Turn the player off. 2 Disconnect the AC adapter and the power cord from the player. 3 Turn the player upside down and lift the stand. 4 Slide the battery pack’s lock switch in the direction of the arrow 1, then detach the battery pack in the direction of the arrow 2.
Powering on/off Turning the power on/off Press POWER on the main unit. Turning the power on/off in standby mode Press POWER on the remote control. Preparations POWER button The power turns on and STAND-BY indicator changes colour from red to green. If you press POWER on the remote control again, the power turns off and STAND-BY indicator turns red. STAND-BY indicator Power button Condition On Standby Off STAND-BY indicator Green Red Off When the power turns on, STAND-BY indicator turns green.
Changing the mode Preparations You can enjoy various contents of discs, the digital TV and other external equipment by changing the mode. Change it depending on your needs. Press MODE repeatedly to select the mode. Each time you press MODE, the mode changes on the screen as below. DTV Select when you want to watch the digital TV broadcasting. Select when you want to play a disc on the LCD monitor of this player. DVD/CD • Make sure that “ DVD/CD ” is selected when you play a disc.
Using “Quick Menu” 1 Press QUICK. “Quick Menu” appears. The contents may vary depending on the mode. Preparations When you want to change settings, open “Quick Menu”, a list of functions which are available in the current mode. It can be operated in the same manner in any mode. e.g. 2 Press / ENTER. to select an item, then press 3 Set the details. 35 SD-P120DTKE_ENG_01-68.
SD-P120DTKE_ENG_01-68.
TV viewing ● Preparation for TV viewing ● TV view operations ● System settings SD-P120DTKE_ENG_01-68.
Preparation for TV viewing ■ To change the language or country setting Initial setup When you first use the DTV, the unit shows the language menu for initial setting. Follow through this process to search channels available in your area. TV viewing 1 If you want to change the language or country setting, perform the initial setting steps again. You need to reset to the factory default setting before changing the settings. See page 39 . Turn the power on. The language menu will appear in a few seconds.
Channel scanning ■ Automatic channel scan Scanning will start. To cancel the search, press EXIT while pressing SHIFT. ■ To reset to the factory default setting 1 Press SET UP to display the main menu. 2 Press / ENTER. to select “Channel Search” then press 2 Select “System Setting” using ENTER. 3 Press / ENTER. to select “Auto Scan” then press 3 Press / to select “First Time Installation” then press ENTER. The channel scan will start.
TV view operations Channel selection You can select channels by the following ways: 1 Press . 2 Press number buttons on the remote control. TV viewing • e.g. To select 2 channel Press 2 • e.g. To select 56 channel Press 5 6 (Within about 1 second) To adjust the volume Press +/– (Volume button). The volume indicator will appear in the display. + : Increases the volume – : Decreases the volume The volume indicator will disappear if neither button is pressed for a few seconds.
To adjust brightness of the LCD To change the screen size You can select the screen size to your preference. Press DIMMER while pressing SHIFT. Press WIDE while pressing SHIFT. Each time you press DIMMER, the brightness level changes from 1 (dark) to 4 (bright). Each time you press WIDE, the screen size changes. (depending on the broadcast) To set sleep timer Using the teletext This unit can be turned off automatically by setting a sleep time.
TV view operations (Continued) Using the channel list ■ To display the channel list TV viewing You can view the channel list previously stored by scanning. Press SET UP to display the main menu and select “Channel List” using / then press ENTER. The channel list will appear. To preview the program, select a channel using / then press ENTER. ■ To lock channels The pin code is required to lock channels, see page 45 .
■ “Quick Menu” in TV mode See page 35 on how to operate “Quick Menu”. e.g. 1 PICTURE TV viewing A picture adjustment menu 66 appears. 2 SETUP A setting menu 70 appears. 43 SD-P120DTKE_ENG_01-68.
TV view operations (Continued) Customizing channel lineup You can store lists of your favourite channels. ■ To add channels to the favourite list TV viewing 1 Press SET UP to display the main menu. 2 Press / to select “Favourite List” and then press ENTER. 2 Press / to select the channel you want to delete from the favourite list and then press ENTER. The symbol will disappear and the channel is deleted. Press EXIT while pressing SHIFT to exit.
System settings ■ To display system information You can view the software version and hardware version of this unit. 1 Press SET UP to display main menu. to select “System Setting” then press 3 Press / ENTER. to select “System Info” then press The system information will display. ■ To change the pin code to select 2 Enter the pin code using the number buttons. (Default pin code is 888888) 3 Press / ENTER.
SD-P120DTKE_ENG_01-68.
Playback Play your favourite disc. ● Loading a disc ● Changing the camera angle ● Connecting to headphones ● Selecting subtitles ● Playing a disc ● Selecting a playback sound ● Changing a playback speed ● Playing audio/video/picture files ● Playing a desired scene ● Adjusting the picture ● Playing in random order ● Selecting the sound enhancement ● Playing repeatedly ● Playing in a favourite order ● On-screen Display mode ● Zooming a picture SD-P120DTKE_ENG_01-68.
Loading a disc For disc compatibility information, see page 20 . Load a disc in the disc slot. Playback Do not insert an 8cm disc. Never use incompatible discs. Neglecting this may cause malfunction. ■ To remove the disc Press EJECT then remove the disc after the disc comes out. CAUTION • Keep your fingers clear of the disc slot when disc is loading or unloading. Neglecting to may cause serious personal injury. • Do not use a cracked, deformed, or repaired disc.
Connecting to headphones You can connect headphones to the headphone jack using a stereo mini plug. Stereo mini plug (∅3.5mm) Playback • Before connecting, temporarily turn down the volume with the volume button. Readjust to your preference when playback starts. • Turn off the player before you connect or disconnect the headphone cable. Possible shakes produced by plug connecting/disconnecting may cause damage to the disc. CAUTION When you use headphones, keep the volume at a moderate level.
Playing a disc DVD-V VCD The following icons are used in this manual to indicate features and/or functions that are applicate to each disc. CD DVD-V : DVD Video disc ■ Preparations • Turn on the power of the player. • Select “ DVD/CD ” by pressing MODE. Caution Never operate the player in a moving vehicle. Vibration may prevent proper playback of the player or cause damage to the disc.
Pausing playback (Still mode) Press PAUSE/STEP during playback. The picture gets still and sound is muted. To resume normal playback, press PLAY. Adjusting the volume of the speakers or the connected headphones Press +/– (Volume button). The volume indicator will appear in the display. DVD-V VCD CD 1 Press TOP MENU. e.g. 1 2 3 4 The top menu appears. 2 Press / / / to select the title you want. If the titles in the top menu are assigned a number, you can select the title by pressing number buttons.
Playing a disc (Continued) ■ About the screen saver If 20 minutes elapse while the power is on and there is no disc in the player or while the disc is stopped, the screen saver is automatically displayed (when “Screen saver” (refer to “Function Settings”) is set to “On” ). To turn off the screen saver, press any button on the main unit or remote control.
Changing a playback speed Playing in fast reverse or fast forward DVD-V VCD CD Press REV or FWD during playback. Playing frame by frame DVD-V VCD CD During playback, press PAUSE/STEP to pause playback. : Fast reverse playback Press PAUSE/STEP repeatedly to play frame by frame. : Fast forward playback Press PLAY to resume normal playback. Each time you press the REV or FWD button, the playback speed changes. Press PLAY to resume normal playback.
Playing a desired scene DVD-V VCD CD Skipping chapters or tracks 1 2 Press SKIP ( / ) repeatedly to locate the chapter or track you want. Category Playback starts from the selected chapter or track. : Playback starts from the beginning of the next chapter or track. Playback : Playback starts from the beginning of the current chapter or track. When you press twice, playback starts from the beginning of the preceding chapter or track.
Notes • Pressing the CLEAR button while pressing the SHIFT button resets the numbers. • Some discs may not respond to this process. • Some scenes may not be located precisely as you specified. Marking the desired position to locate (Bookmark function) 1 During playback, press T repeatedly to display “Bookmark”. You can register up to 3 bookmarks. 1 At a scene where you want to register a bookmark, press PAUSE/STEP to pause. 2 Press T repeatedly to display “Bookmark”.
1 Playing in random order Playing repeatedly DVD-V DVD-V VCD CD During playback, press RANDOM to display “Shuffle On” on the screen. 1 The mode on the screen will disappear in a few seconds if not operated. Playback When playing an audio CD, see page 64 . ■ To resume normal playback Press RANDOM repeatedly until “Shuffle off” appears. Notes • Some discs may not permit random playback. • The random mode will be canceled when you turn off the power.
Repeating a title, chapter or track 1 During playback, press REPEAT repeatedly to select the repeat mode. Each time you press the button, the repeat mode changes on the screen. Notes • Some discs may not permit repeat playback. • The repeat mode will be canceled when you turn off the power. • If you press STOP twice, the repeat mode ends and playback stops. Repeat playback starts after finishing the current chapter or track.
Playing in a favourite order DVD-V 1 VCD CD During stop, press MEMORY. The programming display appears. Press to select “Play Program” then press ENTER. e.g. DVD-V The player starts memory playback. Program 2 3 4 Title 2 5 6 Title 3 7 8 Title 4 9 10 11 12 13 14 15 16 Title 5 Title 6 Playback Play Program 2 Enter a track number when using a video CD. 1 Title 1 Clear Clear All Setting the title, chapter or track in the order you wish to play.
Zooming a picture DVD-V 1 VCD CD ■ To resume normal playback Press ZOOM during playback. Press ZOOM repeatedly until “Off” appears. The zoom icon appears. This operation is available also during slow, still, fast forward or fast reverse playback. 2 X Select the zoom point and magnification level. Playback • Magnification level: Press ZOOM repeatedly. Notes • Some discs may not respond to zoom feature. • Depending on scenes, the buttons may not work as described.
1 Changing the camera angle Selecting subtitles DVD-V DVD-V VCD CD Press ANGLE while playing a scene recorded with multiple camera angles. The angle icon ( ) appears on the screen. e.g. Playback Angle icon Number of angles Current angle Press SUBTITLE during playback. The current subtitle setting is displayed. 2 Press SUBTITLE while the subtitle setting is displayed on the screen.
Selecting a playback sound DVD-V 1 VCD Good morning! Bonjour! ¡Buenos días! CD Press AUDIO during playback. The current audio setting is displayed. ■ Selecting sound channels of VIDEO CDs During playback, press AUDIO repeatedly to select the sound channel. e.g. 1/3 D 2 ch Eng Sound recording Audio language system Press AUDIO while the audio setting is displayed on the screen. Each time you press the button, you can select a preferred sound from those included on the DVD video disc.
Playing audio/video/picture files DVD-V VCD CD You can play audio CDs, MP3 (audio), DivX® (video) or JPEG (picture) files on this player. ® ■ MP3 or DivX media compatibility with this player Playback Playable media (MP3) CD-ROM, CD-R, CD-RW, DVD-R, DVD-RW, SD Memory Card*, MultiMediaCard*, Memory Stick*, xD-Picture Card* Playable media (Divx) CD-ROM, CD-R, CD-RW, DVD-R, DVD-RW Sampling Frequency 32 kHz, 44.
When using a memory card 1 How to eject the memory card 1 Press MODE repeatedly until “ CARD ” appears. Press on the centre of the memory card and then, pull the memory card straight and slowly out. 2 Insert a memory card into the slot. Note • Do not eject the memory card while it is in use. If ejected while in use, information on the memory card may be lost. ■ To select the category of file Insert a media you want to play. 1 Select “Filter” on the settings screen using / / / then press ENTER.
Playing audio/video/picture files (Continued) ■ Playing repeatedly (Audio CD/MP3) Select “Repeat” on the settings screen using / / / during playback then press ENTER. Playback Each time you press ENTER, the repeat mode changes. Off: Resume to normal playback. Single: Repeat current track. All: Folder: Repeats all tracks in order. (Audio CD) Repeats current folder. (MP3) ■ Playing in Random/Intro order (Audio CD/MP3) Select “Mode” on the settings screen using / / / during playback then press ENTER.
■ Playing in a favourite order (Audio CD/MP3) You can combine your favourite tracks/files and play in the order you determine. 1 Select “Edit mode” on the settings screen using / / / then press ENTER. 2 Position the cursor using to the track/file list. 3 Select tracks/files you want to play using then press ENTER. ) appears next to the selected 4 Select “Add to Program” on the settings screen using / / / then press ENTER. The check mark ( ) disappears and the player memorizes the selected tracks/files.
Adjusting the picture DVD-V VCD CD These adjustments are effective only on the LCD of this player. When using a connected monitor, make picture adjustment on the monitor. 1 Press PICTURE. A picture adjustment menu appears. / to select BRIGHTNESS CONTRAST COLOR TINT SHARPNESS Playback e.g. PICTURE SIZE 2 Set the details. Refer to the table on the right.
1 2 Selecting the sound enhancement On-screen Display mode DVD-V DVD-V VCD CD Press E.A.M.* 1 VCD CD Press DISPLAY during playback. The current sound enhancement setting appears. The current instructional information appears. * E.A.M. = Enhanced Audio Mode e.g.: DVD video disc Press E.A.M. repeatedly. • [3D Off] Normal sound. Notes • Actual effects to sounds may vary depending on the speaker system. Make the selection to your preference.
SD-P120DTKE_ENG_01-68.
Function Settings You can change the default settings to customize performance to your preference. Customizing the function settings SD-P120DTKE_ENG_69-92.
Customizing the function settings DVD-V VCD CD You can change the default settings to customize performance to your preference. 1 4 Press SET UP during stop. The setting menu appears. 2 Function Settings 3 To change other settings, press 2 to 4. Press / to select the icon of the setting (listed below) to change, then press . 5 Setting OSD Menu , then repeat steps Press SET UP. The setting menu disappears, and the procedure finishes.
Video Audio Default DVD-V VCD CD View Mode DVD-V VCD CD E.A.M. DVD-V VCD CD You can easily switch to a preferred audio enhancement. (E.A.M. = Enhanced Audio Mode) D.R.C. DVD-V VCD CD To turn on or off a function that makes faint sounds easier to hear even if you lower the volume during late hours playback. (D.R.C. = Dynamic Range Control) Digital Out DVD-V VCD CD To select an output sound format corresponding to your system connection.
Customizing the function settings (Continued) Language Audio OSD Menu DVD-V VCD CD To view on-screen displays in English. English: To view on-screen displays in French. Français: To view on-screen displays in Spanish. Español: To view on-screen displays in German. Deutsch: Nederlands: To view on-screen displays in Dutch. To view on-screen displays in Swedish. Svenska: To view on-screen displays in Turkish.
DivX subtitle Western European: To display subtitles in west European language. Central European: To display subtitles in Central Cyrillic: European language. To display subtitles in Slavonic Cyrillic language. Video Aspect Ratio DVD-V VCD CD 4:3 : Select when a standard 4:3 TV is connected. 16:9 : Select when a 16:9 wide TV is connected. SD-P120DTKE_ENG_69-92.indd 73 View Mode DVD-V VCD CD Fill: Pictures are expanded horizontally and vertically to fit the shape of the screen.
Customizing the function settings (Continued) Audio E.A.M. Digital Out DVD-V VCD CD Normal: Normal sound. 3D: To obtain expansive virtual surround sound effects from just two speakers. Function Settings Note • Pressing the E.A.M. button on the remote control also allows you to achieve the same setup. 74 D.R.C. DVD-V VCD CD On : Dynamic range is reduced. Off : DVD-V VCD CD Bitstream: Select when connected to an amplifier equipped with a Dolby Digital, DTS, MPEG1 or MPEG2 decoder.
3 Press / to select “Parental control” and enter the password you set then press ENTER. Rating Parental control DVD-V VCD CD To set the parental level 1 Press / / / to select “Parental control” and then press ENTER. The password setting display appears. 5 Press / to select the parental level to set and then press ENTER. 8 : Adult 7 : NC-17 6:R 5 : PG-R 4 : PG-13 3 : PG 2:G 1 : Kid Safe To change the parental lock level 1 Press / to select “Set Password”.
Customizing the function settings (Continued) To change your 5-digit security code 1 After selecting “Set Password”, press the 9 button five times then press ENTER. Default Default The 5-digit security code is cleared. 2 After selecting “Set Password”, press the number buttons to create a new 5-digit security code. PBC DVD-V VCD To restore the function settings to the factory default settings. To use the menu when playing a PBC-featured VIDEO CD.
Connections You can connect the player to a TV or audio system. Viewing on a connected TV Connecting to a device equipped with HDMI input Viewing pictures from connected video equipment Connecting to audio equipment SD-P120DTKE_ENG_69-92.
Viewing on a connected TV You can connect a TV to this player to view playback picture on it. 1 Connect a TV to the AV OUT jack of this player. Audio/video cable (supplied) To AV OUT Connection to this jack disables the LCD of the player. Red (Right) White (Left) Connections To analog audio inputs Setting Select: Make the following setting. “Digital Out” “Analog 2ch” Page 74 Notes • Refer to the owner’s manual of the connected TV as well.
Connecting to a device equipped with HDMI input This player is compatible with 480i/480p/720p/1080i signals. 1 Connect HDMI equipment to the HDMI terminal of this player. 2 Press MODE repeatedly so that “ HDMI ” appears on the LCD. The LCD is ready to display pictures from the equipment connected to the player. Notes HDMI cable (not supplied) HDMI OUTPUT HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Viewing pictures from connected video equipment You can use the LCD of this player to monitor pictures of connected video equipment. 1 Connect video equipment to the AV IN jack of this player. 2 Press MODE repeatedly so that “ AV-IN” appears on the LCD. The LCD is ready to display pictures from the equipment connected to the player.
Connecting to audio equipment You can enjoy high quality dynamic sounds by connecting the player to audio equipment. Connecting to an AV amplifier (via digital audio input) The connecting method depends on the types of audio input, digital or audio. Signal flow Select the method according to the type of your equipment. Caution • When you connect the player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
Connecting to audio equipment (Continued) CAUTION • When you are connecting (via the BITSTREAM/PCM jack) an AV decoder that does not have Dolby Digital, Digital Theater Systems (DTS) or MPEG2 decoding function, be sure to set “Digital Out” to “PCM” from the on-screen displays 74 . Otherwise, high volume sound may damage your hearing as well as the speakers. • When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog audio output jacks.
Others Useful informations. Output sound conversion table Before calling service personnel Specifications SD-P120DTKE_ENG_69-92.
Output sound conversion table Discs DVD video discs VIDEO CDs AUDIO CDs Sound recording system Dolby Digital 48 kHz 96 kHz DTS MPEG1, MPEG2 MPEG1 Linear PCM 44.
Before calling service personnel Check the following guide for the possible cause of a problem before contacting service. Symptom No power. Correction • Connect the AC adapter or power plug securely. • Install the battery pack. • Re-charge the battery. • Turn on the player again. • Connect the aerial properly. • Redo channel scan. • Change the position and direction of the aerial. • Move the aerial away from the cause of the interference. • Move the aerial away from the cause of the interference.
Before calling service personnel (Continued) Symptom The playback picture has occasional distortion. Cause • The disc is dirty. • Player is in fast forward or fast reverse mode. • The player was moved or given a shock. • The disc is not set correctly. Brightness is unstable or • The effect of copy protection. If you noises are present in the connect the player to a VTR, TV/VTR playback pictures.
Symptom The remote control does not work properly. Cause • The remote control is not pointed at the remote sensor of the player. • The remote control is too far from the player. • The battery in the remote control is exhausted. • The player’s remote sensor is exposed to a strong light source such as direct sunlight or other illumination. Correction • Point the remote control at the remote sensor of the player. • Operate the remote control within about 3 m (9.9 feet). • Replace the battery with a new one.
Specifications Others Player Power supply DC 12 V 100 – 240 V AC, 50/60 Hz (with the supplied AC adapter) Mass Approximately 3.4 kg (Including the battery pack) External dimensions 342 × 324 × 62 mm (W/H/D) (Not including stand) Signal system PAL/3.58NTSC Laser Semiconductor laser, wavelength 650 nm / 795 nm Frequency range DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz 96 kHz sampling 4 Hz to 44 kHz Operating conditions Temperature: 5°C to 35°C (41°F to 95°F) Connectors AV output (AV OUT) ø3.
Liquid crystal display Panel size 29.9 cm (11.8 inches diagonally measured) Projection system IPS (In-Plane-Switching) Driving system Amorphous silicon TFT active matrix Resolution 786 (H) × 466 (V) pixels (effective pixel rate : more than 99.99%) Supplied accessories Audio/video cable ............................................................. 1 Remote control (MEDR120BX) ........................................ 1 Coin-shaped battery (CR2025).........................................
Memo 90 SD-P120DTKE_ENG_69-92.
Memo 91 SD-P120DTKE_ENG_69-92.
© 2008 Toshiba Corporation SD-P120DTKE_ENG_69-92.
