User Manual
Table Of Contents
- User’s Manual
- Uživatelská příručka
- Benutzerhandbuch
- Brugerhåndbog
- Manual del usuario
- Käyttöohje
- Manuel de l'utilisateur
- Εγχειρίδιο χρήσης
- Korisnički priručnik
- Felhasználói kézikönyv
- Manuale utente
- Gebruikershandleiding
- Brukerhåndbok
- Podręcznik użytkownika
- Manual do Utilizador
- Korisnički priručnik
- Руководство пользователя
- Содержание
- Введение
- Проверьте наличие компонентов
- Требования к системе
- Подготовка диска к работе
- Подключение диска к компьютеру
- Размонтирование и отключение диска
- Дополнительная информация
- Часто задаваемые вопросы
- Возможные проблемы и способы их решения
- Поддержка TOSHIBA
- Заявления о соответствии нормативным требованиям
- Användarhandbok
- Používateľská príručka
- Uporabniški priročnik
- Kullanıcı El Kitabı
- دليل المستخدم
User’s Manual EN-5
CANVIO BASICS
2. Now, plug the USB 3.0 micro-B connector into the corresponding port of
the drive itself.
< Windows PC >
Immediately,
Q the Power/Data indicator light will illuminate
Q the drive will power up
Q the drive should mount and a new drive icon should appear in “My
Computer”
< Mac >
Immediately,
Q the Power/Data indicator light will illuminate
Q the drive will power up and is ready to use
Dismount and disconnect the drive
It is strongly recommended not to unplug the drive by just unplugging the
cable connection as it may be that data is written to the drive at that time.
Such data will be lost and the drive may be damaged physically!
Please follow the steps below for a safe dismount of the drive.
< Windows PC >
1. Click the “Hardware and Eject Media – icon”
A pop-up message box will appear listing the external devices
connected to your computer.
2. Select the TOSHIBA drive to eject.
After a few seconds, you will get the notification that it is now safe to
remove the device.
3. Click “OK” and you can unplug the drive now.
< Mac >
Ctrl-click on the hard disk icon and choose “Eject”.
OR
Drag the hard disk icon to the trashcan.
You can unplug the drive now.
Cleaning the drive case / enclosure
Before cleaning the drive, make sure that it’s physically disconnected from
the computer. We suggest to use standard products for cleaning it and to
make sure that possible remaining liquid on the surface will be wiped off.