User manual

- 5-2 -
How to Shut Down the Software
This section describes how to shut down the software.
To shut down the software, follow the procedure described below.
1 Right-click the icon in the task tray.
2 In the menu that appears, click Exit.
3 When the “automatic backup shut down confirmation” dialog appears, click OK.
The software will shut down.
Exit
 You cannot click Exit while a backup/restore process is in progress.
 You cannot click Exit while the setup window of the software is
open. Close the window and right-click the icon in the task tray to
open the menu.
NOTE
OK
 If you shut down the software, the backup will not be
performed at the specified time even if the storage device is
connected to the computer.
 Re-launch the software in order to have it running in the task
tray again.
 The software will also run the task tray again if the computer
is restarted or if you start the computer again after shutting
down the software.