User manual
10
DC IN 12V
1 +12V
2 +12V
3 GND
4 GND
REMOTE
1
2
3
4
5
6
7
8
9 NC
NC
NC
NC
GND
NC
RXD
TXD
NC
5 4 A Connector Pin Assignments
䝿 Only use optional camera head model # IK-HD1H with this camera controller.
The use of another head may cause damage to the control unit and camera head.
䝿 When connecting the camera cables, be sure to turn off the camera control unit and
any other equipment connected to it.
䝿 For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA
approved ungrounded type AC adaptor with the specifications described below.
Power supply voltage
䠌
12V DC
㼳
10%
Current rating
䠌
More than 1.5A
Ripple voltage
䠌 Less than 50mV
(
p-p
)
Connector
䠌 HR10A-7P-4S by HIROSE electronics Co. Ltd
Pins 1, 2 䠌 12V
Pins 3, 4 䠌 GND
䝿 If the securing screw on the connector of the camera cable loosens, noise may appear
on the screen. Be sure to tighten the connector completely.
Back panel view
5 2 Caution on Connection
5 3 Connection on Back Panel
3
4
2
1
123 45
8796
60I