User manual
9
䐡 DC IN 12V terminal
Accept a DC power input (12V).
䐢 Y/G terminal
Outputs Y or G. (BNC connector)
䐣 P
B/B terminal
Outputs P
B or B. (BNC connector)
䐤 P
R/R terminal
Outputs P
R or R. (BNC connector)
䐥 REMOTE terminal
To connect to a RS-232C device for remote control function.
䐦 EXT. SYNC terminal
Used when the camera output signal is synchronized to an external signal.
(BNC connector)
䐧 SYNC OUT terminal Output terminal for synchronization signal. (BNC connector)
䐨 HD-SDI terminal
Video signal output terminal for HD-SDI format video signal. (BNC connector)
䐩 KEY LOCK switch Enables/disables buttons
FORMAT switch Switches between 59.94i and 60i.
䐙 to 䐠.
Lens
(option)
IK-HD1H
䟺
option
䟻
Camera
Control unit
Camera Cable
for IK-HD2C
䟺
option
䟻
HD monitor
analog TV (option)
DC power supply
(option)
DC power supply
(option)
DC IN 12V
Y/P
B/PR
Three Coaxial
Cables 75
(option)
䂿
IK-HD2C
5 CONNECTION
5
5. 1 -1 Analog Connection
1 Standard Connection
Lens
(option)
IK-HD1H
䟺
option
䟻
Camera
Control unit
Camera Cable
for IK-HD2C
䟺
option
䟻
HD monitor
digital TV (option)
DC IN 12V
HD-SDI
One Coaxial
Cable 75
(option)
䂿
IK-HD2C
5. 1 -2 Digital Connection
* Please use a low conductor resistance cable for HD-SDI terminal.