Owner manual

12
Activating the Noise Reduction
If the receiving signal is weak and the picture is blurry,
the picture may be improved when using this function.
1
In the PICTURE menu, press
B
or
b
to select Noise
Reduction.
2
Press
C
or
c
to select O , Low, Middle or High.
Sound controls
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
Press MENU /
C c
to highlight SOUND icon.
2
Press
B
or
b
to select MTS.
OK Enter
SOUND
MTS
Dual
Bass
Treble
Balance
Audio Level Oset
Auto
0
0
0
0
Dual 1
3
Press
C
or
c
to select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual programme, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
NOTE: If you experience noise with a particular
programme on whose channel reception is usually good,
try setting MTS mode to Auto, then switch
s
to
e
Mono (monaural).
Reset
1
In the PICTURE menu, press
B
or
b
until Reset is
selected and press OK.
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
1
In the SOUND menu, press
B
or
b
to select Dual.
2
Press
C
or
c
to select Dual 1 or Dual 2.
NOTE:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV is
turned o .
Adjusting the sound quality
You can adjust the basic sound quality.
1
In the SOUND menu, press
B
or
b
to select an item
you want to adjust.
2
Press
C
or
c
to adjust the settings as required.
Selection
C
Pressing
c
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
Adjusting Audio Level O set
Sometimes there can be large changes in volume when
switching from an ATV channel or an external input.
Using this feature reduces these volume di erences.
1
In the SOUND menu, press
B
or
b
to select Audio
Level O set and press OK.
2
Press
B
or
b
to select an option and press
C
or
c
to
adjust the volume level.
CONTROLS AND FEATURES