User`s manual

28
Installation AppendixDefi nitions in
Confi guration
Introduction
How to Use
Build a security application
The Administrator can use the built-in motion detection to monitor any movement
to perform many useful security applications. To upload the snapshots, users can
choose either email, FTP, HTTP or Network storage according to user's needs.
All server settings are in the Server section on the Application page. Refer to the
defi nition section for detail confi guration.
1. Click on "Confi guration" on the home page.
2. Click on "Motion detection" in the left column.
3. Check "Enable motion detection".
4. Click on "New" to have a new window to monitor video.
5. Type in a name to identify the new window.
6. Use the mouse to click, hold, and drag the window corner to resize or the title
bar to move the window.
7. Fine-tune using the "Sensitivity" and "Percentage" fields to best suit the
camera's environment. Higher "Sensitivity" detects the slighter motion. Higher
"Percentage" discriminates smaller objects.
8. Clicking on "Save" enables the activity display. Green means the motion in the
window is below the threshold and red means it is over the threshold.
9. Click on "Application" in the left column.
10. Add a server in the server section.
11. Add a media with snapshot type in media section. Set the number of pre-event
and post-event images to be uploaded.
12. Add a event in event section.
• Enter one event name and enable this event.
• Check the weekdays as you need and give the time interval to monitor the
motion detection every day.
• Select the Trigger on Motion detection and Check the window name set in
step 5.
• Set the appropriate delay time to avoid continuous false alarms following the
original event.
• Check the server name set in Step 10 and select the media name set in
Step 11.
13. Click on "Save" to save the settings.
Administrator's features (Cont.)