User`s manual

29
Installation Appendix
Defi nitions in
Confi guration
Introduction
How to Use
Software revision upgrade
Obtain up-to-date software from the Toshiba web site (http://www.toshibasecurity.
com). An easy-to-use Upgrade Wizard is provided to upgrade the Network Camera
with just a few clicks. The upgrade function is available to only the Administrator. To
upgrade the system, follow the procedures below.
1. Download the fi rmware fi le named "xxx.pkg" from the appropriate product folder.
2. Run the Installation Wizard and proceed by following the prompts. Refer to the
instructions of the Installation Wizard on CD-ROM for details.
3. Or upgrade fi rmware from Maintenance settings directly.
4. The entire process will fi nish in a few minutes and then automatically restart the
system.
If power fails during the writing process to the Flash memory, the program
in the memory of the Network Camera could be permanently destroyed. If
the Network Camera does not restart properly, ask your dealer for technical
service.