User`s manual

36
Installation Appendix
Introduction
How to Use Defi nitions in
Confi guration
RTSP Streaming
“Authentication” It supports disable, basic and digest modes.
“Access name for stream 1” Access URL of stream 1 for making connection from
the client software when using the MPEG-4 codec.
“Access name for stream 2” Access URL of stream 2 for making connection from
the client software when using the MPEG-4 codec.
Using rtsp://<ip address>/<access name> to make connection.
“RTSP port” The port can be changed to another number other than the default
Port 554.
“RTP port for video” The video channel port for RTP must be an even number.
“RTCP port for video” The video channel port for RTCP must be the port number of
video RTP plus 1.
“RTP port for audio” The audio channel port for RTP must be an even number.
“RTCP port for audio” The audio channel port for RTCP must be the port number
of audio RTP plus 1.
User can modify Multicast setting for stream1 and stream2.
“Always multicast” Select it to enable when connecting over 10 multicast clients.
“Multicast group address” Used by sources and the receivers to send and receive
content.
“Multicast video port” The video channel port for multicast must be an even
number.
“Multicast RTCP video port” The video channel port for multicast RTCP must be
the port number of multicast video port plus 1.
“Multicast audio port” The audio channel port for multicast must be an even
number.
“Multicast RTCP audio port” The audio channel port for multicast RTCP must be
the port number of multicast audio port plus 1.
“Multicast TTL” Specifies the number of routers (hops) that multicast traffic is
permitted to pass through before expiring on the network.
Network settings (Cont.)