Before attempting to connect or operate this product, please read these instructions completely.
IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and user instructions should be followed. 5. Electrical Connections - Only a qualified electrician should make electrical connections. 6.
! Electrical Specifications Power 24VAC Class 2 Only 24 VAC Accessories: Camera Power: Tools Required: English Español Français Portuguese Italiano JK-SM5C-O JK-SM5T-O JK-SM5C-I JK-SM5T-I Heater/ Blower: 40 Watts SEE CAMERA MANUAL Phillips Head Screwdriver ⅝” Allen Wrench 24 VAC Accesorios: Calentador: 40 watts, Soplador: 40 Watts Energía De la Cámara fotográfica: SEE CAMERA MANUAL Las Herramientas Requirieron: Destornillador Principal Plano Del ⅝” Allen Wrench.
FOR WALL APPLICATION PACKETS (4) (8) 1 (4) Spacer Packet (1) Mounting Plate (1) (1) Seal wall mount on pendent pipe with teflon tape (1) (1) (7) (4) (4) (1) • Montaje de la pared del sello en la pipa pendiente con la cinta del Teflon • Bâti de mur de joint sur la pipe en suspens avec la bande de teflon • Dichtungswandeinfassung auf pendent Rohr mit Teflonklebeband • Montagem da parede do selo na tubulação pendent com fita do Teflon • Supporto della parete della guarnizione sul tubo pendent con na
3 4 Add teflon tape to PMSM5 and thread on to adapter • Agregue la cinta del Teflon a PMSM5 y rosque encendido al adaptador • Ajoutez la bande de teflon à PMSM5 et filetez dessus à l'adapteur • Fügen Sie Teflonklebeband PMSM5 hinzu und verlegen Sie an zum Adapter • Adicione a fita do Teflon a PMSM5 e rosqueie-a sobre ao adaptador • Aggiunga il nastro del Teflon a PMSM5 e filetti sopra all'adattatore 5 WARNING: Ensure drill is level to avoid damage to the circuit board Remove plug with ⅝” Allen hex tool
7 8 A FEED cable through wall mount and PMSM5 and into housing • Cable de la ALIMENTACIÓN con el montaje de la pared y PMSM5 y en la cubierta • Câble d'ALIMENTATION par le bâti de mur et le PMSM5 et dans le logement • ZUFUHR-Kabel durch Wandeinfassung und PMSM5 und in Gehäuse • Cabo da ALIMENTAÇÃO com a montagem da parede e o PMSM5 e na carcaça • Cavo dell'ALIMENTAZIONE con il supporto della parete e PMSM5 ed in alloggiamento Tighten cable gland; align notch and boss with mating boss in housing top (indi
11 Finish assembly with Pendant or Wall mount (not supplied) • Asamblea del final con el montaje pendiente o de la pared (not supplied) • Finition avec le bâti en suspens ou de mur (not supplied) • Ende mit Pendent oder Wandeinfassung (not supplied) • Conjunto do revestimento com a montagem Pendent ou da parede (not supplied) • Assemblea di rivestimento con il supporto della parete o Pendent (not supplied) FOR SURFACE MOUNTING USING SIDE CONDUIT ENTRANCE 12 Etch knockout slightly with utility knife.
FOR SURFACE MOUNT APPLICATIONS 13 WARNING: Ensure drill is level to avoid damage to the circuit board 14 2 1 3 Drill out (3) mounting holes as shown for # 10 hardware (not supplied) • Taladre (3) los agujeros de montaje como se muestra para # el hardware 10 (not supplied) • Percez (3) les trous de montage comme montré pour # le matériel 10 (not supplied) • Bohren Sie (3) Entlüftungslöcher wie gezeigt für # Hardware 10 heraus (not supplied) • Fure (3) furos de montagem como mostrado para # a ferragem 10
17 Housing is designed to mount to 411/16 x 411/16” electrical box. Mount box securely to ceiling structure • La cubierta se diseña para montar a 411/16 x 411/16” caja eléctrica. Caja del montaje con seguridad a la estructura del techo • Le logement est conçu pour monter dans 411/16 x 411/16 » boîte électrique. Boîte de bâti solidement à la structure de plafond • Gehäuse ist entworfen, um zu 411/16 x 411/16“ elektrischem Kasten anzubringen.
Toshiba IKWB21A CAMERA 21 (13mm) ½" Install (4) ½” spacers to center bosses Secure camera quick release mounting plate with #8 hardware provided • Instale (4) espaciadores del ½ los” para centrar los jefes • Pletina segura del lanzamiento rápido de la cámara con el hardware #8 proporcionado • Entretoises installez (4) ½ des » pour centrer des patrons • Le plat de support bloqué de dégagement rapide d'appareil-photo avec le matériel #8 a fourni • Bringen Sie (4) ½“ Distanzscheiben an, um Chefs zu ze
FOR CONNECTING HEATER AND BLOWER POWER 24 23 24VAC power for Heater blower connect to PCB • la energía 24VAC para el soplador del calentador conecta con el PWB • la puissance 24VAC pour le ventilateur de réchauffeur se relient à la carte • Energie 24VAC für Heizungsgebläse schließen an PWB an • o poder 24VAC para o ventilador do calefator conecta ao PWB • il potere 24VAC per il ventilatore del riscaldatore si collega al PWB 25 Wire Gauge ,5 22 Total vA consumed 5.
27 An anti glare ring is privided for use with IK-WB21A camera. Press ring around lens as shown. (A drop of Cyanoacrylate adhesive can be used if desired) • Un anillo antideslumbrante privided para el uso con la cámara de IK-WB21A. Presione el anillo alrededor de la lente como se muestra. (La gota de A del pegamento del cianocrilato puede ser utilizada si está deseada) • Un anneau anti-éblouissant privided pour l'usage avec l'appareil-photo d'IK-WB21A. Pressez l'anneau autour de l'objectif comme montré.
30 NOTE: To change the power input plug (from female to male connector) cut off existing plug.
32 Install security screw, if desired 33 Attach lanyard loop to hook • Instale el tornillo de la seguridad, si está deseado • Ate el lazo del acollador al gancho • Installez la vis de sécurité, si désiré • Attachez la boucle de lanière au crochet • Bringen Sie Sicherheitsschraube an, wenn Sie gewünscht werden • Bringen Sie Abzuglinieschleife zum Haken an • Instale o parafuso da segurança, se desejado • Avviti la vite di sicurezza, se voluto 34 Secure Dome Assembly to housing • Asegure la asamble
Replacement Parts List Item Number JK-SM5C-0 1 5 2 6 3 7 4 Part Number Comments 1 RP0SM5TR Replace Trim Ring Assembly 2 RPDC5 Dome and Gasket 3 RP0SM5HG Housing 4 RP95FSP01 1” NPT Plug 5 RP0SM5HB Heater / Blower Unit 6 RP0SM5BKT Heater Bracket 7 RP0SM5PCB Accessory PCB
