32KL933R 32KL934R DIGITAL Series OWNER’S MANUAL
Contents 01_MB62_[GB]_(01-TV)_IDTV_(IB_INTERNET)_(32155LED_1911UK)_NICKEL17_10077403_10077738.indd 1 English Safety Precautions ................................................. 3 Viewing Info Banner, Electronic Programme Air Circulation ..................................................... 3 Guide .................................................................... 20 Viewing Info Banner.......................................... 20 Heat Damage......................................................
English Other Settings ................................................... 28 Using a Conditional Access Module ................. 28 Setting Timers, Setting Date/Time ........................ 29 Timers ............................................................... 29 Setting Sleep Timer .......................................... 29 Setting Programme Timers ............................... 29 Configuring Date/Time Settings ........................ 29 Source Settings, Other Controls .........................
Safety Precautions Air Circulation Do not Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DON’T remove any fixed cover as this may expose dangerous voltages. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater.
Installation and Important Information Where to install English Sturdy tie (as short as possible) P Clip * Button and stand style is dependent on model. P Clip “P” Clip position on TV is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. Headphone Warning English USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Loud music can damage your hearing irreversibly. Do not set the volume to a high level when listening through headphones, particularly for extended listening periods.
Important safety information (continued) English • Do not open this unit. An attempt to repair the unit by a non-expert could be dangerous and potentially cause a fire hazard. All repairs must be carried out by qualified service personnel only. • Keep away from rodents. Rodents (and also cockatiels) enjoy biting electric flexes. They can cause a short circuit (fire hazard!) and receive a fatal electric shock. • Always hold the plug when disconnecting the unit from the socket outlet. Do not pull on flex.
Removing the pedestal stand English When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. • Two people are required for installation. • To install a wall-mount from another manufacturer. (1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. (3) Follow the instructions provided with your wall bracket.
The Remote Control English Simple at-a-glance reference of your remote control.
Connecting External Equipment Side View English Before connecting any external equipment, remove the mains plug from the wall socket. COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). USB Input RGB/PC Input Aerial/Cable Input DIGITAL AUDIO Socket YPbPr 5Vdc Max:500mA YPbPr Input SIDE AV HDMI Input Sockets SIDE AV Input MODE o Headphone Menu Wheel SCART Socket * a decoder could be Digital Satellite, Free to Air or any other compatible decoder.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI inputs on your TV receive digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. These inputs are designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a DVD Player Connecting to a DVD Player via YPbPr With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component YPbPr video connection cable for enabling connection. First, plug the single jack of the cable to the TV’s YPbPr socket (side).
Connecting a USB Memory English Connect a USB Memory • You can connect a USB memory to your TV by using the USB input of the TV. This feature allows you to display/play music, photo or video files stored in a USB memory. • It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with this TV. • You may back up your files before making any connections to the TV set in order to avoid any possible data loss.
Power Save Mode English Environmental Information • This television is designed to consume less energy to save environment. You not only help to save the environment but also can save money by reducing electricity bills, thanks to the energy efficiency feature of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located on page 28.
Controlling the TV English A wide variety of external equipment can be connected via the sockets located on the side and back of the TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the button on the left side of the TV may be used for some functions.
Initial Installation English Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on page 13. IMPORTANT: Ensure that the aerial is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV to on using the side control switch.
Initial Installation - continued Auto Tuning English Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • Auto Tuning will completely retune the television and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost. Note: You can press MENU button to cancel.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press . to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking Viewing Channel List The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: English You can view stored channels and sort them by using the Channel List feature. will be displayed. Select Yes if you want to move the channel and press OK. • Selected channel is now moved.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • • Press button. The information screen will appear giving details of the channel and programme currently being viewed. • • To set the timer for a selected programme, press OK button to select Timers menu. • • Press YELLOW button to switch to timeline view. • • Press GREEN button to list the schedule. • • Press BLUE button to display filtering options.
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Press MENU button and select Settings by using Left or Right button. • Select Language from setup menu and press OK to view this menu. Press the RETURN button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: by pressing Left or Right button change the audio language.
Digital Settings - Parental Control, Menu Lock, Set PIN English You can view or set parental preferences of your TV. Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Press MENU button and select settings by using Left or Right button. Press OK to continue. Use Up or Down to select parental and then press OK to continue.
Configuring Picture Settings English You can configure picture settings of your TV by using Picture Settings menu. Configuring Picture Settings Brightness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour, Sharpness and Hue. Sets the brightness value for the screen. Press MENU button and select Picture by using Left or Right button.
Configuring Picture Settings - continued English Colour Temp: Colour Temperature increases the ‘warmth’ or ‘coolness’ of the picture by increasing the red or blue tint. Picture Zoom: Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema. Press MENU button and select Picture by using Left or Right button. Press Up or Down button to select Picture Zoom.
Changing Picture Format 16:9 Subtitle Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9 etc.) black bars may be visible on the top and bottom of the screen. When subtitles are included on a letterbox format broadcast, this setting will raise the picture to ensure that all the text is displayed.
Configuring PC Picture Settings English PC Picture Settings (*) V Position (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. V (Vertical) Position shifts the image vertically towards the top or bottom of the screen. PC Picture controls In the PC Position menu press the Down button until V Position is highlighted. Press the Left or Right button to adjust the value.
Configuring Sound Settings Configuring Sound Settings Sound settings can be configured according to your personal preferences. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. English You can configure sound settings of your TV by using Sound Settings menu. In equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Classic and User. Press the MENU button to return to the previous menu.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Other Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Displays other setting options of the TV set.
Setting Timers, Setting Date/Time English Timers Editing a Timer To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: • Select the timer you want to edit by pressing Up or Down button. • When finished with editing, press GREEN button to save. You can press MENU button to cancel.
Source Settings, Other Controls English Configuring Source Settings Configuring Other Settings - General You can enables or disable selected source options. The TV will not switch to the disabled source options when button is pressed. You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit. To view general configuration preferences, select Other Settings in the Settings menu and press OK button.
Other Controls - continued English Blue Background If the signal is weak or absent, the TV will automatically change to a blue screen. To enable this, set Blue Background to On. • In the Other Settings menu, select Blue Background and choose On or Off using Left or Right button. Software Upgrade This feature helps to keep your TV updated. It works automatically and searches for new information when available. Note that this setting is inactive to be modified.
USB Media Browser English This TV allows you to enjoy photo, music or video files stored on a USB memory Manual Start • To display Media Browser window, you can press MENU button on the remote control and then select Media Browser by pressing Left or Right button. • You can also select Media Browser from the Quick button menu. • Only limited types of U3 USB device are supported. Therefore, it is suggested not to use U3 USB for playing Media Player.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory, you can use this menu screen. To view photo files from a USB Memory, you can use this menu screen. When you select Photos from the main options, available image files will be filtered and listed on this screen. • / : Navigate menu • Play ( button): Starts the playback. • Stop ( button) : Stops playback.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Slideshow Feature You can use this feature to display photos on your TV. • Pause ( • Continue ( button) : Pauses the slideshow. button) : Continues the slideshow. • Loop/Shuffle (GREEN button): Press once to disable Loop. Press again to disable both Loop and Shuffle. Press once more to enable only Shuffle. Press again to enable all.
USB Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB memory English Media Browser Settings You can set your Media Browser preferences by using the Settings dialogue. Press Up or Down button to highlight an item and use Left or Right button to set. View Style: Sets default browsing mode. Slideshow Interval: Sets slide show interval time. Show Subtitle: Sets subtitle enabling preference. Subtitle Language: Sets supported subtitle language.
Analogue Text Services English This television has a multi-page text memory, which takes a few moments to load. Analogue Text Services Revealing Concealed Text Before using the text services, the required language region must be chosen. To discover the solutions on quiz and joke pages press the button. • Select Language from the Settings menu. Holding a Page • Press the Left or Right button to choose the required language region. • After the Teletext language is selected, press MENU button to exit.
Appendix A: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) English Source Supported Signals PAL 50/60 EXT NTSC 60 (SCART) RGB 50 RGB 60 Side AV YPbPr HDMI1 HDMI2 PAL 50/60 NTSC 60 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 50Hz 1080p 60Hz 480i 60Hz 480p 60Hz 576i 50Hz 576p 50Hz 720p 50Hz 720p 60Hz 1080i 50Hz 1080i 60Hz 1080p 24Hz 1080p 25Hz 1080p 30Hz 1080p 50Hz 1080p 60Hz Note: In some cases a signal
Appendix C: Supported File Formats for USB Mode Format File Extension Video Audio .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 Movie .dat MPEG1, 2 .vob MPEG2 .mkv H.264, MPEG1,2,4 EAC3 / AC3 .mp4 MPEG4, H.264 PCM/MP3 MPEG2, MPEG4 PCM/MP3 H.264 PCM - MPEG 1 Layer 1 / 2 (MP3) .avi Music .mp3 .bmp .sub Subtitle MPEG2 max 1920x1080 @ 30p 20Mbit/sec max 1920x1080 @ 30p 20Mbit/sec Baseline JPEG .jpg .jpeg Photo Remarks (Maximum resolution/Bit rate etc.
Specifications and Accessories English Broadcast Systems/Channels DVB-T, MPEG2, DVB-T, MPEG4 HD DVB-C, MPEG2, DVB-C, MPEG4 Video Input Stereo Nicam External Connections 1-SCART 1 Input 2-SCART-S (via SCART 1) Input 3-YPbPr (via VGA) Input 4-SIDE AV Input 5-HDMI 1/2 Input 6-PC Input 7-Digital Audio Output 8-YPbPr Input USB Port Headphone Socket Operating Conditions Supplied Accessories PAL, SECAM, NTSC 4.
License Information • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals. Because this is an evolving technology, it is possible that some devices may not operate properly with the television.
Questions and Answers Questions English Q A Q A Q A Q A Q A Q A Q A Q A Why is there no sound or picture? Check the TV is not in standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check the volume has not been turned down or that sound mute has not been selected. What can cause a poor picture? Interference or a weak signal. Try a different TV station.
Questions Q A Why doesn't the Media Browser feature operate? Make sure that USB memory is connected correctly. Incorrect behaviour may occur with a USB Hub connection. Why is the digital channel locked? Parental control is activated. Check parental settings.
Features Contents English Features ............................................................... 44 General Properties............................................ 44 Safety Information ................................................ 45 Notes on Discs ..................................................... 45 On handling discs ............................................. 45 On cleaning....................................................... 45 Notes on moisture condensation ..........................
Safety Information Notes on Discs On handling discs DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed. • To keep the disc clean, handle the disc by its edge. Do not touch the surface. CLASS 1 LASER PRODUCT • Do not stick paper or tape on the disc. English CAUTION • If the disc is contaminated with any substance like glue remove before using it.
English Notes on moisture condensation Moisture condensation damages the DVD video player. Please read the following carefully. Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts of the DVD video player.
Overview of the Remote Control Switch to TV or DVD mode Eject Subtitle Angle Title Menu Root Menu (if available) Audio language of the disc English Operation LED Standby/ On mode Numeric Buttons AV / Source MENU On/Off Quick Settings OK / Confirm Navigation Buttons Exit menu Setup menu Return to Root menu Jump Info To alter the volume To mute the sound Pause Skip Next / Skip Previous Rapid Reverse Play Zoom Repeat Rapid Advance Stop Title Menu Root Menu Note: Buttons that are not indicated o
General Operation English You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons. Buttons on the Remote Control DVD Playback Movie Playback Picture Playback Music Playback Play Play Play Play Pause Pause Pause Pause Stop Stop Stop Stop / Skip backward/forward e/f / / ANGLE SETUP Skip Previous / Next backward/forward Highlights a menu item.
11. For your convenience: General Playback 1. Press the button. 2. Insert a disc to the loader. The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it. 12. Slide Show is disabled when the ZOOM mode is on. Using the Karaoke Mode A menu may appear on the TV screen after a few moments or the film may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change.
4. You can set your preferences on this menu screen. 5. Press OK to open the following screen during connecting the microphone. Subtitle English You can select the default subtitle language if supported by the DVD disc. Preference Setup Page M1: Microphone-1 volume control. M2: Microphone-2 volume control. Play: Playback volume control. Echo: Sets echo level. Setup Menu Items Video Setup Page Default If you choose Reset and press OK button, the factory-presets are loaded.
Some functions (Angle, Zoom, etc.) do not work Spdif Output • Angle can only be changed when the angle symbol is displayed. No picture English • These functions are not available on the DVD. • Have you pressed the correct buttons on the remote control? Try once more. You can set Spdif Output as RAW or PCM. If you select PCM from Spdif Output in DVD menu and play DVD with Dolby audio, you can get audio output with two channels via the speakers and the DIGITAL AUDIO socket.
LPCM Definition of Terms English LPCM stands for Linear Pulse Code Modulation and is digital audio. Angle Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles. MPEG Chapter Number DivX® These numbers are recorded on DVD discs.
Disc Types Compatible with This Unit R e c o r d in g Ty p e s D is c S iz e English D is c Ty p e s (L o g o s ) C h a r a c t e r is tic s DVD DVD contains excellent sound and video • due to Dolby Digital and MPEG2 System A u d io + V id e o 12 cm A u d io 12 cm screen and audio functions can be • Various easily selected through the on screen menu. A U D IO -C D LP is recorded as an analog signal with • An more distortion.
Supported File Formats English Media Format File Extension .mpg/ .dat/ .vob Movie .avi (optional) Audio MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG4 PCM/MP3 MS ISO MPEG4 PCM/MP3 Support SP and ASP PCM/MP3 DivX 3.11, 4.x, 5.x, 6.0 PCM Sample Rate: 8k ~ 48kHz MPEG4 - Remarks (Maximum resolution/Bitrate etc.) MPEG2 MS ISO .divx Music Video - MPEG 1/2 .
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner's manual Helpline number from the numbers shown below.
