ON-LINE MANUAL 48L344*DG LED Backlight LCD Satellite TV During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance. You can download the latest version of firmware from www.toshiba-om.net/firmware.php Some features listed in this document are limited due to local legislation and may not be available in all countries. “Register your TV online at: www.toshiba-europe.
Contents Child Lock.......................................................... 23 Set PIN.............................................................. 23 Configuring Picture Settings.............................. 24 Mode.................................................................. 24 Contrast............................................................. 24 Brightness.......................................................... 24 Sharpness......................................................... 24 Colour.
English Software Upgrade.............................................. 32 Application Version............................................ 32 Hard of Hearing................................................. 32 Audio Description.............................................. 32 Auto TV Off........................................................ 33 Store Mode........................................................ 33 MEDIA Renderer............................................... 33 Power Up Mode................
Safety Precautions Air Circulation Do not Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. DON’T remove any fixed cover as this may expose dangerous voltages. Heat Damage Damage may occur if the television is left in direct sunlight or near a heater.
Installation and Important Information Where to install English * Button and stand style is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information • Even if the television conforms to the required DVB - T/C/S specifications, the compatibility with future digital DVB - T/C/S transmissions is not guaranteed. • Some digital television functions may not be available in certain countries. • The DVB - T/C/S system present in this device, allows reception of both FTA (Free To Air) and Encrypted channels. Note; Encrypted channels require a specific encryption system to view, which may not be available in certain countries.
Removing the pedestal stand English When using a Wall Bracket Please use a wall bracket appropriate for the size and weight of the LCD TV. • Two people are required for installation. • To install a wall-mount. (1) Unplug and remove any cables and/or other component connectors from the rear of the TV. (2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. (3) Follow the instructions provided with your wall bracket.
The Remote Control Simple at-a-glance reference of your remote control. 17. Pause 2. Numeric buttons 18. Play 3. TV-AV / Channel list / 19. Subtitle on-off (in Media Switches among broadcast Browser mode and in DVB types channels) 4. Mute 20. Stop 5. Volume Up / Down 21. Rapid advance 6. Menu on-off 22. Image size 7. Navigation buttons (Up/Down/Left/Right) 23. My button 2 (*) 8. Okay (Confirm) / Hold (in TXT mode) / Channel List 9. Return / Index page (in TXT mode) 10.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. English (*) Number of these inputs may change according to the model of your TV. (**) Your TV may not be supported depending on the model. NOTE: Although this TV is able to connect to HDMI Aerial cable:..................................................... Connect the aerial to the ANT. socket on the rear of equipment, it is possible that some equipment may not operate correctly. the TV.
Connecting an HDMI® or DVI Device to the HDMI Input English The HDMI inputs on your TV receive digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device. These inputs are designed to accept HDCP (HighBandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D– compliant [1] consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output).
Connecting a Computer Connecting a DVD Player English To Connect a Computer Connecting to a DVD Player via YPbPr With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component YPbPr video connection cable for enabling connection. First, plug the single jack of the cable to the TV’s YPbPr socket (side).
Connecting a home network English The LAN port allows your TV to connect to your home network. You can use this networking system to access photo, video and audio files that are stored on a media server and play/display them on your TV. Note: Wireless USB LAN adaptor can be purchased from the retail outlet or Toshiba service company. You can find the phone numbers of the local services on the back cover of this manual.
Power Save Mode English Environmental Information This television is designed to be environment friendly. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
Controlling the TV Switching on Using the Remote Control If the standby LED is unlit, check that the mains plug is connected to the power and press the / I button on the back side of the television to switch the television on. Press the MENU button on the remote control to see the menus. To put the television into Standby, press button on the remote control or on the TV. To view the television, press button again. The picture may take a few seconds to appear.
Initial Installation English Before switching on the TV, put your decoder and media recorder to Standby if they are connected and ensure the aerial/cable and/or Satellite dish is connected to your TV. To set up the TV, use the buttons on the remote control as detailed on page 7. IMPORTANT: Ensure that the aerial/cable and/or Satellite dish is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1.
Initial Installation - continued English After the available stations are stored, Edit Channel List will be displayed on the screen. 9. You can select Network, Frequency, Network ID and Search Step from this screen. For highlighting lines you see, use Up or Down button. You can set Search Step as 8000 kHz or 1000 kHz. If you select 1000 kHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search. 10.
Auto Tuning English Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • It is recommended to run Auto Tuning periodically to ensure that all new services are added. Please be aware that Auto Tuning will completely retune the television and all current channels and settings will be lost. progress bar will move along. The television will search for all available stations. You must allow the television to complete the search.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. • Select Manual channel scan from the Install and Retune menu and press OK. Only if an analogue signal or Service is available. The television can be tuned-in manually.
Manual Tuning, Analogue Fine Tuning - continued The television can be tuned-in manually using Manual Search feature. English • After selecting search type as Satellite, you can set the desired options and press OK button to search. In satellite manual scan, you can enter frequency, polarisation, symbol rate values and change network channel scan and satellite options by using left/right buttons or numeric buttons on the remote. You can then press OK button to search.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press “LANG Mono.
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. English Viewing Channel List The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: • Select Edit Channel List to manage all stored channels. Use Up or Down and OK buttons to select Edit Channel List. • Selected channel is now moved.
Viewing Info Banner, Electronic Programme Guide English Viewing Info Banner • Press SUBTITLE button to sort channels by a genre. • Press“INFO - ” button. The information screen will appear giving details of the channel and programme currently being viewed. • For information on a highlighted programme, press i button. • Whenever you change channel, the TV displays the broadcast picture along with an information banner at the bottom of the screen. This will remain on the screen for a few seconds.
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. • Press MENU button and select Settings by using Left or Right button. • Select Language and press OK to view this menu. Select the desired language by using Left or Right button. Press the MENU button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used. Audio: By pressing Left or Right button change the audio language.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. English Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Child Lock disables the buttons on the television. All buttons on the remote control can still be used. • A dialogue box asking for the lock key will be displayed.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. English Configuring Picture Settings Sharpness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour and Sharpness. Sets the sharpness value for the objects displayed on the screen. Press Left or Right button to adjust the sharpness.
Configuring Picture Settings - continued English Film Mode (optional): Films are recorded at a different number of frames per second to normal television programmes. Press Left or Right button to set this feature to Auto or Off. Turn this feature to Auto when you are watching films to see the fast motion scenes clearly. Skin Tone: Adjust the desired skin tone. Colour Shift: Adjust the desired colour tone. RGB Gain: Press OK button to edit RGB gain.
Changing Picture Format English Press “SCREEN ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Note: Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. Note: You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle.
Configuring PC Picture Settings English Press Left or Right button to adjust the value. PC Picture Settings (*) (*) While in VGA/PC mode, some sections in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. PC Picture controls Contrast, Brightness and Colour adjustments in this menu are identical to adjustments defined in TV picture menu. Select Reset and press OK button to reset the adjustments.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. English Configuring Sound Settings Balance (Only for speaker) Sound settings can be configured according to your personal preferences. This setting is used for emphasizing left or right speaker balance. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. • Press Left or Right button to change the level of the balance.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Other Settings Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Operating Settings Menu Items • Press Up or Down button to highlight a menu item. • Press OK button to select an item. • Press MENU button to exit.
Setting Timers, Setting Date/Time English Timers Editing a Timer To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: • Select the timer you want to edit by pressing Up or Down button. Setting Sleep Timer The television can be set to turn itself off after a certain length of time. • Highlight Sleep Timer by using Up or Down button.
Source Settings, Other Controls English Configuring Source Settings You can enable or disable selected source options. The TV will not switch to the disabled source options when the “SOURCE - ” button is pressed. You can download or upload satcoDX data. In order to perform these functions a USB device must be connected to the TV first. You can upload current services and related satellites & transponders in TV, to a USB device (file extension will be “sdx”).
Other Controls - continued English Configuring Other Settings - General Blue Background You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit. If the signal is weak or absent, the TV can automatically change to a blue screen. To enable this, set Blue Background to On from. To view general configuration preferences, select Other Settings in the Settings menu and press OK button.
Other Controls - continued English Auto TV Off CEC You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time, the TV will go off. Press MENU button and select Settings by using Left or Right button. Press OK button to continue. Use Up or Down button to select Other Settings and then press OK button. Select Auto TV Off using Up or Down button.
Network Settings, Portal, Internet Browser and YouTube English Configuring Network Settings Press the MENU button to open the main TV menu. Highlight Settings by pressing Left or Right buttons and press OK to enter. Highlight Network Settings and press OK. While Network Type is highlighted, press Left or Right buttons to select connection type. Press OK to enable the connection. If you are going to make a wireless connection for the first time, press YELLOW button to search for available networks.
Network Settings, Portal, Internet Browser and YouTube continued English Press the EXIT button to close the portal and watch TV again. NOTES: • The virtual keyboard or numeric buttons on the remote, which are assosiated with the letters of the alphabet, can be used for entries. • The browser does not support multiple tabs. • Some internet pages include flash content. These are not supported by the browser. • The TV does not support any download processes from the web browser.
Using Media Browser This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Manual Start To display Media Browser window, press the “ ” button on the remote control. The Media Browser menu is also accessable from the main menu. Press the MENU button on the remote. Select Media Browser by pressing Left or Right button and press OK. Select the media type to be listed and press OK.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory or a DMS, you can use this menu screen. To view photo files from a USB Memory or a DMS, you can use this menu screen. When you select Photos in the main Media Browser menu, available image files will be filtered and listed on this screen. • / : Navigate menu.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Slideshow Feature • Pause ( • Continue ( (Play Preview): Display selected file in a small preview screen. Press again to stop preview. Red button: Sort files by name. Play ( button): Start to play all files listed beginning with the selected one. LANG - You can use this feature to display all images automatically on your USB Memory or a DMS.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or on a MEDIA SERVER. English Using MENU button in Media Browser Mode Media Browser Settings Pressing MENU button while in Media Browser mode displays the following menu screen: You can set your Media Browser preferences by using the Settings dialogue. Press Up or Down button to highlight an item and use Left or Right button to set. View Style: Set default browsing mode.
Analogue Only Text Services English This television has a multi-page text memory, which takes a few moments to load. Only available if an analogue service is transmitted. Before using the text services, the required language region must be chosen. • Select Language from the Settings menu. • Highlight Teletext in the Language Settings menu and press Left or Right button to choose the required language region. After the Teletext language is selected, press MENU button to exit.
Appendix A: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) English Source EXT-1 (SCART1) EXT-1 (SCART2) Side AV Supported Signals Available PAL O NTSC 60 O RGB 50/60 O SECAM O PAL O NTSC 60 O SECAM O PAL 50/60 O NTSC 60 O SECAM YPbPr HDMI1 HDMI2 HDMI3 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50
Appendix C: PIN Information Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No. Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H-sync 4 NC* 9 NC 14 V-sync 5 NC 10 Ground 15 NC * NC = not connected English - 43 - English Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
Appendix D: Supported File Formats for USB Mode English Media Movie Extension Format Notes Video Audio dat, mpg, mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@ 30fps 50Mbit/ sec dat, mpg, mpeg MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@25fps 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps” 50Mbit/ sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/ sec .
Specifications and Accessories Optional Accessories Wireless USB Adaptor - Toshiba WLM -30U2 and is available from the retail outlet or Toshiba service company. 48” L A ++ Energy Efficiency Class 121 cm / 48” Visible Screen Size (approx.) On Mode Power Consumption (approx.) (*) 44 W Annual Power Consumption (approx.) (**) 64 kWh < 0.50 W Standby Power Consumption (approx.
License Information English • HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals.
Q & A Section Picture General Answer Why is there no sound or picture? Check if the TV is not in standby mode Check the mains plug and all mains connections Why is there a picture but no sound? Check if the volume has not been turned off or sound mute has not been selected Why does the sound come only from one speaker when stereo sound is selected? Check the balance in the SOUND menu if it has been set to one side or not Why is the soundtrack in English when a different audio language has been sel
REACH information English The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation. Please consult the following website www.toshiba.
If you wish to view the advanced functions but do not have access to a computer or the internet then please contact your nearest owner’s manual Helpline number from the numbers shown below. Country name locally Contact Number Österreich 0810 - 144 122 (7,3 ct/min aus dem Festnetz der Telekom Austria, Mobil ggf.