ON-LINE MANUAL 40L3448DG LED Backlight LCD Satellite TV During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance. You can download the latest version of firmware from www.toshiba-om.net/firmware.php Some features listed in this document are limited due to local legislation and may not be available in all countries.
Contents English Safety Precautions.................................................. 4 Air Circulation...................................................... 4 Heat Damage...................................................... 4 Mains Supply....................................................... 4 Warning............................................................... 4 Do........................................................................ 4 Do not........................................................
Contents Video Playback.................................................. 43 Recordings........................................................ 44 Media Browser Settings..................................... 44 Using MENU button in Media Browser Mode.... 45 To Close the Media Player................................. 45 Analogue Only Text Services................................. 46 Analogue Text Services..................................... 46 Using Text Button -TEXT...................................
Safety Precautions English This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products. Air Circulation Do not Leave more than 10cm around all edges when wall mounting the television to allow adequate ventilation.
Installation and Important Information * Button and stand style is dependent on model. Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen. Place the TV on a stable, level surface that can support the weight of the TV.
Important safety information English • Any function related to the digital television (with the DVB logo) is available only within the country or area where such signals are transmitted. Verify with the salesperson if it is possible to receive a DVB - T/C/S/S2 signal in the area where you live. • Even if the television conforms to the required DVB - T/C/S/S2 specifications, the compatibility with future digital DVB - T/C/S/S2 transmissions is not guaranteed.
Fitting or Removing the pedestal stand (2) To fit the stand use the screws supplied. or (3) Remove the screws fixing the pedestal stand (4) After the screws are removed, hold the pedestal stand in place, then remove the pedestal stand and the plastic moulding from the TV. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.
The Remote Control Simple at-a-glance reference of the remote control. The supplied type is model dependant. English 1. Standby 17. Pause / Timeshift recording 2. Numeric buttons 18. Play 3. TV-AV / Channel list / 19. Subtitle on-off (in Media Switches among broadcast Browser mode and in DVB types channels) 4. Mute 20. Stop 5. Volume Up / Down 21. Rapid advance 6. Menu on-off 22. Image size 7. Navigation buttons (Up/Down/Left/Right) 23. My button 2 (*) 8.
Connecting External Equipment Before connecting any external equipment, remove the mains plug from the wall socket. English Side View COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Satellite Input 5Vdc Max:500mA USB Inputs (*) 13Vdc/18Vdc SPDIF 5Vdc Max:500mA Coax.OUT SIDE AV DIGITAL AUDIO Socket 300mA Max.
Connecting an HDMI® or DVI Device to the HDMI Input English • Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz. To Connect an HDMI Device Connect an HDMI cable (type A connector) to the HDMI terminal. For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ). • If your HDMI connection is capable of 1080p and/or your TV is capable of refresh rates greater than 50Hz, you will need a Category 2 cable.
Connecting a Computer Connecting a DVD Player English To Connect a Computer Connecting to a DVD Player via YPbPr With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the TV and hear the sound from the TV’s speakers. Some DVD players are connected through COMPONENT SOCKETS (YPbPr). In this case, you must use the supplied Component YPbPr video connection cable for enabling connection. First, plug the single jack of the cable to the TV’s YPbPr socket (side).
Connecting a home network English Connectivity feature allows the TV to connect to the home network wired or wirelessly. You can use this networking system to connect to the Toshiba Portal or to access photo, video and audio files that are stored on a media server connected to the network and play/ display them on the TV. Wired connection Connect the TV to the modem/router via a LAN cable (not supplied). Select Network Type as Wired Device in Network Settings menu and then highlight Network.
Power Save Mode English Environmental Information This television is designed to be environment friendly. You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy efficiency feauture of this TV. To reduce energy consumption, you should take the following steps: You can use Power Save Mode setting, located in the Picture Settings menu.
Controlling the TV English A wide variety of external equipment can be connected via the sockets located on the side and back of the TV. Whilst all the necessary adjustments and controls for the TV are made using the remote control, the buttons on the Back of the TV may be used for some functions.
Initial Installation IMPORTANT: Ensure that the aerial/cable and/or Satellite dish is connected and a Common Interface module is not inserted before switching on the TV for the first time installation. 1. Connect the mains plug and switch the TV on button. If the TV does not switch on, using the press any numbered or button on the remote control, then the language selection menu will be displayed. This screen will appear the first time that the TV is switched on and each time the TV is reset.
Initial Installation - continued English You can select Network, Frequency, Network ID and Search Step from this screen. For highlighting lines you see, use Up or Down button. You can set Search Step as 8000 kHz or 1000 kHz. If you select 1000 kHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search.
Initial Installation - continued English While the search continues a message will appear, asking whether you want to sort channels according to the LCN(*). Select Yes and press OK to confirm. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). After the available stations are stored, Edit Channel List will be displayed on the screen. Press OK button to quit channel list and watch TV.
Auto Tuning English Auto Tuning As new services are broadcast, it will be necessary to retune the television in order to view them. • It is recommended to run Auto Tuning periodically to ensure that all new services are added. Please be aware that Auto Tuning will completely retune the television and all current channels and settings will be lost. button to cancel the process. In such a case, located channels are not stored. Note: Menu list of available features may change depending on the model.
Manual Tuning, Analogue Fine Tuning The television can be tuned-in manually using Manual Search feature. English Digital Aerial Manual Search Analogue Manual Search The feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. The television can be tuned-in manually. For example: if the television cannot be connected to a media recorder/decoder with a SCART lead or to tune-in a station on another System.
Manual Tuning, Analogue Fine Tuning - continue The television can be tuned-in manually using Manual Search feature. English • After selecting search type as Satellite, you can set the desired options and press OK button to search. In satellite manual scan, you can enter frequency, polarisation, symbol rate values and change network channel scan and satellite options by using left/right buttons or numeric buttons on the remote. You can then press OK button to search.
General Operation English Stereo and Bilingual Transmissions Standby Notifications If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear. If the TV switches off while in No Signal mode, the following on-screen message will be displayed on the next switch-on: Stereo… Press “LANG - ” to select Stereo or Mono.
Channel List, Sorting Programmes, Programme Locking You can view stored channels and sort them by using the Channel List feature. English Viewing Channel List Deleting a Channel The channel order may be changed to suit your personal preference. • Select Channel List from the main menu and press OK button. The following menu will be displayed: You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel.
Viewing Info Banner, Electronic Programme Guide English • Press GREEN button to view the next day. Viewing Info Banner • Press“INFO - ” button. The information screen will appear giving details of the channel and programme currently being viewed. • Press YELLOW button for zooming to a programme. • Press BLUE button to display filtering options. • Press SUBTITLE button to sort channels by a genre. • For information on a highlighted programme, press “INFO ” button.
Language Selection English Language Settings Using this menu you can adjust the preferred language settings. Some features may not be available. • Press MENU button and select Settings by using Left or Right button. • Select Language and press OK to view this menu. Select the desired language by using Left or Right button. Press the MENU button on the remote control to exit. Preferred These settings will be used if available. Otherwise the current settings will be used.
Digital Settings - Parental Control, Menu Lock, Set PIN You can view or set parental preferences of your TV. English Viewing Parental Control Menu Child Lock Press MENU button and select the Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Parental and press OK to continue: Child Lock disables the buttons on the television. All buttons on the remote control can still be used. • A dialogue box asking for the lock key will be displayed.
Configuring Picture Settings You can configure picture settings of your TV by using Picture Settings menu. English Configuring Picture Settings Sharpness You can use different picture settings in detail. You can customize current picture mode settings as desired. For example, you can change items such as, Brightness, Contrast, Colour and Sharpness. Sets the sharpness value for the objects displayed on the screen. Press Left or Right button to adjust the sharpness.
Configuring Picture Settings - continued English Picture Zoom: Sets the picture size to Auto, Full, 16:9, Subtitle, 14:9, 14:9 Zoom, 4:3 or Cinema. Press Left or Right button to change the setting. Film Mode (optional): Films are recorded at a different number of frames per second to normal television programmes. Press Left or Right button to set this feature to Auto or Off. Turn this feature to Auto when you are watching films to see the fast motion scenes clearly. Skin Tone: Adjust the desired skin tone.
English Press “SCREEN 4:3 or Cinema. Changing Picture Format ” button repeatedly to select between Auto(*), Full(**), 16:9, Subtitle, 14:9, 14:9 Zoom, Using the special functions to change the size of the displayed image (i.e. changing the height/width ratio) for the purposes of public display or commercial gain may infringe on copyright laws. You can shift to screen up or down by pressing “ ”/“ ” buttons while picture zoom is selected as 14:9 Zoom, Cinema or Subtitle.
Configuring PC Picture Settings English PC Picture Settings (*) Dot Clock (*) While in VGA/PC mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in VGA/ PC mode. Dot Clock adjustment corrects the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts. Press Down button until Dot Clock is highlighted. Press Left or Right button to adjust the value.
Configuring Sound Settings You can configure sound settings of your TV by using Sound Settings menu. English Configuring Sound Settings Balance (Only for speaker) Sound settings can be configured according to your personal preferences. Press MENU button and select Sound by using Left or Right button. Press OK button to view Sound Settings menu. This setting is used for emphasizing left or right speaker balance. • Press Left or Right button to change the level of the balance.
Settings Menu Operation, Conditional Access English Configuring Your TV’s Settings Using a Conditional Access Module Detailed settings can be configured to suit your personal preferences. Viewing Settings Menu Press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Press Up or Down button to highlight a menu item. Press OK button to select an item. Press MENU button to exit.
Setting Timers English Timers To view Timers menu, press MENU button and select Settings by using Left or Right button. Press OK button to view Settings menu. Use Up or Down button to highlight Timers and press OK to continue: Setting Sleep Timer The television can be set to turn itself off after a certain length of time. • Highlight Sleep Timer by using Up or Down button. • Use Left or Right button to set.
Recording Configuration Recording Configuration You can configure recording preferences using this menu. Press MENU button and select Settings by using Left or Right button. Then select Recording Configuration item in the sub-menu and press OK button. The following menu will be displayed. during the First Time Installation use the PIN that you have defined.
Source Settings Setting Date/Time English Configuring Date/Time Settings Configuring Source Settings You can configure date/time preferences by using this menu screen. You can enable or disable selected source options. The TV will not switch to the disabled source options when the “SOURCE - ” button is pressed. • Select Date/Time in the Settings menu to configure Date/Time settings. Press OK button. Use Up or Down button to highlight the Time Settings Mode. It can be set to Auto or Manual.
Satellite Settings English Configuring Satellite Settings Select Satellite settings in the Settings menu to configure satellite settings. Press OK button. Satellite List: To view the list of available satellites select this option. You can add, delete or edit the satellites in the list. Antenna Installation: You can change antenna settings and start a new satellite scan. SatcoDX (optional): There are two options regarding SatcoDX feature. You can download or upload SatcoDX data.
Other Controls English Configuring Other Settings - General Hbb TV You can configure the settings of your TV. Select Settings from main menu and press OK to view the Settings menu. Press the MENU button on the remote control to exit. If you set this option to On, HbbTV services such as catch-up services, video-on-demand, EPG, games will be available if the broadcast supports. You can disable this feature by setting this option to Off.
Other Controls - continued English Audio Description Power Up Mode Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track.
Network Settings, Portal, Internet Browser and YouTube English take up to a minute or two to connect. Configuring Network Settings Press the MENU button to open the main TV menu. Highlight Settings by pressing Left or Right buttons and press OK to enter. Highlight Network Settings and press OK. While Network Type is highlighted, press Left or Right buttons to select connection type. Then highlight Network. Press Left or Right buttons and set as Enabled to enable the connection.
Network Settings, Portal, Internet Browser and YouTube continued English Press the EXIT button to close the portal and watch TV again. NOTES: • The virtual keyboard or numeric buttons on the remote, which are assosiated with the letters of the alphabet, can be used for entries. • The browser does not support multiple tabs. • Some internet pages include flash content. These are not supported by the browser. • The TV does not support any download processes from the web browser.
USB Record Feature English This feature is not available in all countries. For the countries where this feature is available a USB connected storage device will be required. This feature allows you to record and play back digital broadcast contents stored on a USB storage device. Before you use this function, connect a USB storage device to the TV first while the TV is switched off. You should then switch on the TV to enable the recording feature.
Using Media Browser This TV allows you to enjoy photo, music or video files stored on a USB device or media server. English Manual Start To display Media Browser window, press the “ ” button on the remote control. The Media Browser menu is also accessable from the main menu. Press the MENU button on the remote. Select Media Browser by pressing Left or Right button and press OK. • You must obtain any required permission from copyright owners to use copyright content.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. English Playing MP3 Files Viewing JPEG Files To play mp3 files from a USB memory or media server, you To view photo files from a USB Memory or media server, you can use this menu screen. When you select Photos in the main Media Browser menu, available image files will be filtered and listed on this screen. can use this menu screen. • / : Navigate menu.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. English Slideshow Feature • Pause ( button): Pause the slideshow. • Continue ( (Play Preview): Display selected file in a small preview screen. Press again to stop preview. Red button: Sort files by name. Play ( button): Start to play all files listed beginning with the selected one.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. English Note: ” button during You can set subtitles by using “LANG the playback. Selected subtitles may not be displayed correctly in some cases. In order to display movie subtitles correctly, you should set a subtitle language. See the section, Media Browser Settings for selecting movie subtitle language.
Using Media Browser - continued This TV allows you to enjoy photo, music or video files stored on a USB device or media server. English Using MENU button in Media Browser Mode Pressing MENU button while in Media Browser mode displays the following menu screen: You can access Picture, Sound and Settings menu options using this screen. Press MENU again to exit from this screen. To Close the Media Player • Press EXIT button on the remote control.
Analogue Only Text Services This television has a multi-page text memory, which takes a few moments to load. English Analogue Text Services To display an initial page Before using the text services, the required language region must be chosen. Press RET/BACK to access an initial page. The one displayed is dependant on the broadcaster. • Select Language from the Settings menu. • Highlight Teletext in the Language Settings menu and press Left or Right button to choose the required language region.
Appendix A: PC Input Typical Display Modes Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) English Source EXT (SCART) Side AV YPbPr HDMI1 HDMI2 HDMI3 Supported Signals Available PAL O NTSC 60 O RGB 50/60 O SECAM O PAL 50/60 O NTSC 60 O SECAM O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 24Hz 25Hz 1080P 30Hz O
Appendix C: PIN Information Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No. Signal name 1 R 6 Ground 11 NC 2 G 7 Ground 12 NC 3 B 8 Ground 13 H-sync 4 NC* 9 NC 14 V-sync 5 NC 10 Ground 15 NC * NC = not connected English - 49 - English Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
Appendix D: Supported File Formats for USB Mode English Media Extension Format Video Audio Movie .dat, .mpg, .mpeg Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM 1080P@30fps 50Mbit/sec .ts, .trp, .tp, .m2ts MPEG2 ,H.264, VC1, AVS, MVC MPEG1/2 Layer 1/2/3, AAC/HEAAC, AC3/EAC3, LPCM/ADPCM H.264:1080Px2@ 25fps 1080P@50fps MVC: 1080P@24fps Other: 1080P@30fps 50Mbit/sec .vob MPEG2 MPEG1/2 Layer 1/2/3, AC3, LPCM 1080P@ 30fps 50Mbit/sec .
Specifications and Accessories Video Input Stereo Nicam External Connections 1-SCART 1 Input 2-SCART-S (via SCART 1) Input 3-SIDE AV Input 4-HDMI 1/2/3 Input 5-PC Input 6-Digital Audio Output 7-YPbPr Input 8-LAN port USB Ports For sets with built in wireless unit the Home network with a wireless router must be compatible with; Headphone Socket Operating Conditions Supplied Accessories PAL, SECAM, NTSC 4.
License Information English • The terms HDMI and High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • DVB is a registered trademark of the DVB Project. • [1] EIA/CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth digital content protection, which is being standardized for reception of high-definition video signals.
Q & A Section Sound Picture General Answer Why is there no sound or picture? Check if the TV is not in standby mode Check the mains plug and all mains connections Why is there a picture but no sound? Check if the volume has not been turned off or sound mute has not been selected Why does the sound come only from one speaker when stereo sound is selected? Check the balance in the SOUND menu if it has been set to one side or not Why is the soundtrack in English when a different audio language has b
English REACH information The European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation. Please consult the following website www.toshiba.