USER MANUAL L63** Digital Series M63** Digital Series
English Contents Dual..................................................................... 29 Balance ............................................................... 29 Bass, Treble........................................................ 29 Voice Enhancement............................................ 29 Dynamic Bass Boost........................................... 29 Stable Sound® .................................................... 29 Dynamic Range Control......................................
TEXT SERVICES Text services .............................................................. 82 Selecting modes ................................................. 82 Text information .................................................. 82 Navigating pages using Auto .............................. 82 Navigating pages using LIST .............................. 82 Control buttons.................................................... 83 PROBLEM SOLVING Questions and Answers ..........................................
English INSTALLING YOUR TV Safety Precautions DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS. This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety.
INSTALLING YOUR TV English Installation and important information Where to install Locate the television away from direct sunlight and Screw (supplied) strong lights. Soft, indirect lighting is recommended for 9 mm comfortable viewing. Use curtains or blinds to prevent 20 mm direct sunlight falling on the screen. 4 mm Place the TV on a stable, level surface that can support the weight of the TV.
English INSTALLING YOUR TV Please take note The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Installation” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
INSTALLING YOUR TV 19 20 Simple at-a-glance reference of your remote control. 1 2 4 5 7 21 22 23 24 3 6 8 9 25 26 27 10 11 13 14 16 18 19 21 23 25 27 28 29 31 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 12 - Accesses the CLOUD HOME - Accesses to premium content available online To access the on-screen Menu To display the digital on-screen Programme Guide To page up, down, left or right When using menus, the arrows move the cursor on the screen up, down, left or right.
English CONNECTING YOUR TV Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. ILLUSTRATION SHOWS 40.
CONNECTING YOUR TV HDMI’s ARC (Audio Return Channel) feature The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device. This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.
English CONNECTING YOUR TV Connecting an HDMI CEC Control compatible device You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 80–81. the side of your television AV amplifier Playback device Playback device For the setup shown above, you will need three HDMI cables.
CONNECTING YOUR TV To connect a PC to the RGB/PC terminal With either an HDMI or an RGB/PC connection, you can watch your computer’s display on the television. When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable. the back of your television To connect a PC to the HDMI terminal Computer When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector).
English CONNECTING YOUR TV Connecting a home network The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a media server and play/ display them on your TV. NOTE: • If you connect to a shared network outside your home, it is advisable to use a router. Always use network media products in private network environments.
CONNECTING YOUR TV English Controls and input connections A wide variety of external equipment can be connected to the input sockets on the side of the television. While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions. ILLUSTRATION SHOWS 40. DVB COMMON INTERFACE The Common Interface is for a Conditional Access Module (CAM). Contact a service provider.
English CONNECTING YOUR TV Using the menu system Press Press B / b on the remote control to display the menu. Press B / b and OK or c Recording Setup The menu appears as a list of seven topics. As each icon is selected by pressing B / b on the remote control, its respective options will appear on the right.
SETTING UP YOUR TV d Before switching on the TV make sure that your aerial is connected and any decoder / media recorder, if applicable is connected and in Standby. Press BbC c to highlight Next and press OK. The Location screen will appear. Quick Setup Quick Setup b Smart TV Press the 1 button, Toshiba logo will appear. After that, The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is executed.
English SETTING UP YOUR TV There are 3 methods for Wireless Setup: - TKIP/AES: 8-63 ASCII or 64 Hex characters - WEP: 5 or 13 ASCII or 10 or 26 Hex characters • There is only one key ID to set for WEP encryption. • Easy Setup (WPS) - If the AP supports WPS, this method can be used. WPS is an industry standard designed to make connection of wireless LAN equipment and security setup easy. WPS will automatically configure all wireless settings. Press B / b to highlight Done and press OK.
SETTING UP YOUR TV Press B / b to highlight Done and press OK. When the message “Wireless configuration is complete.” appears on screen, press OK. Press OK, and TV Power On Control screen will appear. Select Disabled or Enabled and highlight Next. Quick Setup TV Power On Control 1/2 Country Location NOTE: Settings are not saved if BACK is pressed before Done is selected. m Network Smart TV The Advanced Network Setup screen will appear.
English SETTING UP YOUR TV s NOTE: • None is being used when the satellite dish will control only one universal Low Noise Block (LNB) with a single satellite (e.g. Astra 19.2°). As a rule, most households use just one satellite. • ToneBurst sends a 22 kHz signal. ToneBurst is only necessary for simple LNBs (not universal LNBs). The 22 kHz signal is needed for switching LNBs with multifeed signals as well as for changing between low- and high-band.
SETTING UP YOUR TV Switch Type None LNB Power If your satellite dish is moveable, the following Positioning screen will appear. On No. Satellite 1 Astra 19.2E Dish 1 Positioning LNB 1 Transponder 2 1/120 (10729 MHz V (R)) Go to 0 3 Go to Stored Position 4 Step Size 1 Positioning Transponder : 1/120 (10729) MHz Dish Type : Fixed Lower LOF : 9750 Upper LOF : 10600 W E Satellite : Astra 19.
English SETTING UP YOUR TV x If the reception testing completes successfully, the Auto Tuning startup screen will display. f When Ant/Cable/Satellite is set to Cable, the following setting options will be provided in the Auto Tuning screen. Auto Tuning - Satellite Scan Type Press B / b to select an item and press c and B / b to select your desired option. Quick Scan Search Option Free to Air Start Scan Auto Tuning - Cable Tuning Mode You can select Search Option from Free to Air or All.
SETTING UP YOUR TV From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually. To add a satellite: a b c To edit the satellite settings: a In the Satellite Settings menu, press B to highlight Switch Type. b Press C / c to select None, ToneBurst, DiSEqC 2way, DiSEqC 4way or Single Cable as your satellite switch type. c Press b to highlight LNB Power and press C / c to select On or Off.
English SETTING UP YOUR TV c To delete a transponder: a b In the Transponder Settings menu, press B / b to highlight the line you want to delete. Auto Tuning Press the RED button. NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them. To edit the Transponder Settings: a In the Transponder Settings menu, press B / b to highlight the line you want to edit and press OK.
SETTING UP YOUR TV a Tuning < Channel Tuning Ant/Cable/Satellite The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/ decoder with a SCART lead or when you want to tune-in a station on another System. Use C / c to move across the screen and select any of the ATV Manual Tuning options. Then use B / b to adjust the settings.
English SETTING UP YOUR TV g h Each signal will show on the television. If it is not your media recorder, press B / b again to restart the search. When your media recorder signal is found, press c to move along to Station. Use BbC c to put in the required characters, e.g. VCR. Skip To prevent certain channels from being viewed, positions can be skipped. a b ATV Manual Tuning Station 1 i I A C 2 0 V C R Select ATV Manual Tuning from the Channel Tuning menu.
SETTING UP YOUR TV Channels may be moved and saved to the position of your choice. a b DTV Manual Tuning NOTE: This feature varies depending on the Ant/Cable/ Satellite setting. Select ATV Manual Tuning from the Channel Tuning menu. Manual Tuning This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known. With the list of channels showing, press B / b to highlight the position to be moved and press c. Channels Line No.
English SETTING UP YOUR TV Manual Tuning for DVB-C DTV Settings When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows: Frequency: Input a specific frequency to be scanned Modulation: Choose from one of five QAM modulation options Symbol Rate: Input a specific baud rate (KS/s) to be used for the manual scan Highlight Start Scan and press OK. Channels (Antenna/Cable) The channel order may be changed to suit your personal preference.
SETTING UP YOUR TV c you wish to move and press OK to check. If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary. Once all desired channels have been checked, press B / b to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
English CONTROLS AND FEATURES General controls Selecting channels To select a channel, use the numbered buttons on the remote control. Quick Menu Quick Menu helps you access some options quickly, such as Picture Mode, Picture Size, More Information, Sleep Timer etc. Press QUICK to open the Quick Menu and use B / b to select the option. Channels can also be selected using PU and Pu. To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel.
CONTROLS AND FEATURES Voice Enhancement Voice Enhancement emphasises the frequency range of the speaker’s voice, making it easier to catch what they are saying. Volume controls and sound mute Volume Press 2+ or 2– to adjust the volume. a Sound Mute Press once to turn the sound off and again to cancel. b Dual b Press Press c and B / b to select On or Off.
English CONTROLS AND FEATURES Audio Level Offset Headphone Settings Sometimes there can be large changes in volume when switching from a DTV 5.1ch to a DTV 2ch, an ATV channel, or an external input. Using the Audio Level Offset feature reduces these volume differences. This setting is used to set the sound output when headphones are connected. a b Speaker Link Set the volume level usually used when watching a DTV 5.1ch programme. Tune to a channel which is DTV 2ch, ATV or an external input.
CONTROLS AND FEATURES English Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. WIDE Use this setting when watching a widescreen DVD, widescreen video tape or a 16:9 broadcast (when available). Due to the range of widescreen formats (16:9, 14:9, 20:9 etc.) black bars may be visible on the top and bottom of the screen. 4:3 Use this setting to view a true 4:3 broadcast.
English CONTROLS AND FEATURES NATIVE This setting will show the picture without overscan, i.e. WYSIWYG. PC NORMAL This setting will show the picture without overscan, i.e. WYSIWYG. This option is only available when watching a PC signal source via HDMI or PC terminal. PC WIDE This setting will show the picture without overscan or side panels. This option is only available when watching a PC signal source via HDMI or PC terminal. Dot by Dot Press the “Dot by Dot” is a non-scaling display.
CONTROLS AND FEATURES Picture preferences Most of the picture controls and functions are available in both digital and analogue modes. PLEASE NOTE: Features not available will be greyed out. Picture Mode You can customize current picture mode settings as desired. For example, while selecting “Dynamic”, if you change the following items, such as Backlight, Contrast, Brightness, Colour, Tint, Sharpness and the Advanced Picture Settings items, your new settings are saved for “Dynamic” picture mode.
English CONTROLS AND FEATURES Base Colour Adjustment Auto Brightness Sensor The Base Colour Adjustment feature allows the adjustment of individual colours to suit personal preference. This can be useful when using an external source. When the Auto Brightness Sensor is activated, it will automatically optimise the backlighting levels to suit ambient light conditions. a b a In the Advanced Picture Settings menu, press B / b to select Base Colour Adjustment and press OK.
CONTROLS AND FEATURES c b Press B / b to select Off, Low, Middle or High to suit your preference and press OK. Expert Picture Settings This feature is available when the Picture Mode option is Standard, Hollywood Day, Hollywood Night, and Hollywood Pro. DNR – Digital Noise Reduction DNR allows you to “soften” the screen representation of a weak signal to reduce the noise effect. a b Select DNR from the Noise Reduction menu. Press B / b to select Off, Low, Middle, High or Auto and press OK.
English CONTROLS AND FEATURES White Balance-Window Display Gamma Calibration This feature displays a special Window Pattern to be used when adjusting white balance with a measuring device. Toshiba has integrated picture calibration systems into its LCD televisions. Now you can enjoy the benefits of automatically calibrated gamma and white levels. a In the Expert Picture Settings menu, press B / b to select White Balance and press OK.
CONTROLS AND FEATURES Picture Position When this television receives a true Widescreen picture and Auto Format is On, it will automatically be displayed in Widescreen format irrespective of the television’s previous setting. The picture position may be adjusted to suit personal preference and can be particularly useful for external inputs. a NOTE: The Picture Position feature cannot be selected on DTV or PC Inputs. and B / b to highlight Picture icon.
English CONTROLS AND FEATURES Wireless LAN Information Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection. If you should experience any such problem, immediately turn off either your Bluetooth™ or Wireless LAN device.
CONTROLS AND FEATURES Easy Setup using PBC (Push Button Configuration) You can select the Network Type. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. c Press B / b to select Easy Setup and press OK. a b and B / b to highlight Network icon. Press Press c and B / b to select Network Setup and press OK.
English CONTROLS AND FEATURES Assisted Setup Manual Setup a In the Network menu, press B / b to select Network Setup and press OK. a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Wireless Setup and press OK. b Press B / b to select Wireless Setup and press OK. c Press B / b to select Assisted Setup and press OK. c Press B / b to select Manual Setup and press OK. d Press B / b to select Network Name and press OK.
CONTROLS AND FEATURES Item The settings configured in Wireless Setup can be confirmed. a b Connected is displayed when the TV is connected with the AP. Disconnected is displayed when the TV is not connected with the AP. Signal Connection signal strength with AP (STRONG/MEDIUM/WEAK) Speed Link with AP Mode Working mode (11a, 11b, 11g, 11n) Network Name SSID set Press QUICK to open the Quick Menu. Press B / b to select Wireless Information and press OK.
English CONTROLS AND FEATURES Advanced Network Setup d NOTE: • When the DHCP function of the router connected with this TV is On, you can set Auto Setup to On or Off. (This should usually be set to On.) • When the DHCP function of the router is Off, set Auto Setup to Off, and set the IP Address manually. IP Address Setup Auto Setup a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Advanced Network Setup and press OK.
CONTROLS AND FEATURES You can view the fixed MAC address for the TV (Wired and Wireless). NOTE: When the DHCP function of the router connected to this TV is Off, set Auto Setup to Off, and manually set the DNS address(es). Your internet service provider should have provided these to you. Auto setup a In the Network menu, press B / b to select Network Setup and press OK. b Press B / b to select Advanced Network Setup and press OK. c Press B / b to select DNS Setup and press OK.
English CONTROLS AND FEATURES Using the software keyboard Network Device Setup You can enter text by using the Software Keyboard. The Software Keyboard window will appear when you press OK on a field that accepts character input. To enter text using the software keyboard: a Highlight the desired character on the on-screen software keyboard. b Press OK. c Repeat steps 1 and 2 until you have entered all desired text.
CONTROLS AND FEATURES Media Renderer Setup Once a User Name has completed authentication, it is stored in the TV along with the password. The upper limit for the number of Use Names that can be remembered is 20. You can delete User Names that are stored in the TV. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select External Control Setup and press OK. c Press B / b to select Apps Control Profile and press OK.
English CONTROLS AND FEATURES USB HDD Record Function Setting up the USB HDD for recording This function can be used to record and play digital broadcast programmes (function is dependant on country selection). Read the precautions below before recording or viewing programmes using the USB HDD record function. To connect a USB HDD (not supplied): USB1 or USB2 on the TV NOTE: • In order to use this function, a USB HDD needs to be connected to the TV. Do not use USB Hub.
CONTROLS AND FEATURES Programmed recording can be scheduled easily using the Programme Guide or by specifying the date and time. To search for and record a programme using Genre Search: a PLEASE NOTE Press the YELLOW button on the remote control to access the Genre Search screen. Genre Search When a timed programme is about to start, an information screen will appear offering the option of watching or cancelling the programme.
English CONTROLS AND FEATURES To programme the timer: a b To schedule a programme using the information screen: Press the BLUE button on the remote control. a Select the unprogrammed column (blank column) and press OK. The Edit Timer screen will appear. Press B / b to select Timer Type.
CONTROLS AND FEATURES To view a recorded programme To view the recorded Library screen and select a title from the recorded programme list. You can check, edit or delete scheduling information. a a Press GUIDE and then press the BLUE button. Programme Timers screen will appear. Recording List Library / All Sort : New Thu, 17 Feb 10:00 WWWWWWW Thu, 17 Feb 10:00 Fri, 18 Feb 10:00 Fri, 18 Feb 10:00 WWWWWWW Fri, 18 Feb 10:00 WWWWWWW Sat, 19 Feb 10:00 Sun, 20 Feb 10:00 1235 ITV London ASTRA 19.
English CONTROLS AND FEATURES To delete a recorded programme: Operations from the Library screen a As well as viewing the list of recorded titles on the Library screen, you can protect or delete titles and register titles to Personal Mode. b To display the Library screen: a Press and highlight My Recordings icon and press OK. The Library screen will appear. Library / All Press the RED button. Check boxes will appear next to the titles.
CONTROLS AND FEATURES You can set your preferences for recording. To select USB HDD and Partition for Recording: a Press a In the Recording Setup screen, press B / b to select TimeShift Size. b Press c and B / b to select 512 MB, 1 GB, 2 GB or 4 GB and press OK. and B / b to highlight Options icon. b Press c and B / b to select Recording Setup and press OK. c Press B / b to select Select Device and press OK. USB HDD and Partition list will be appear.
English CONTROLS AND FEATURES To perform a USB HDD operation test: a In the Recording Setup screen, press B / b to select Device Test and press OK. USB HDD operation test will start. Wait until the test ends. NOTE: The results of the device test are only a guide. The device may not function as shown in the results. To format a USB HDD: a In the Recording Setup screen, press B / b to select Format Device and press OK.
CONTROLS AND FEATURES a Press on the remote control and select Internet icon to open the web browser. To use the web browser b NOTE: You can change the mouse mode (Mouse Emulation or Navigation) by pressing the GREEN button on the remote control when the web contents screen is open. a b c d c Press on the remote control and select Internet icon to open the web browser. d Press BbC c to select the URL address bar and press OK.
English CONTROLS AND FEATURES Using Skype Skype-ready Toshiba TVs bring your family and friends closer to your home. Skype on your Toshiba TV allows you to share special moments no matter the distance. Getting started a Press b Press BbC c to select Skype icon and press OK. Before using Skype - Preparation on the remote control. “Welcome to Skype” screen appears. • Connect the FREETALK HD Camera: TALK-7291 to the TV’s USB terminal. Do not use a USB hub.
CONTROLS AND FEATURES Enter your Full Name, Skype Name, Password, Repeat password, and Email. • If you want to receive Skype news and special offers, check the selection box. Skype will inform users about new products, features and special offers by email. c Basic Operation Press B / b to select a tab (Contacts/People, Recent, Settings). Press c and B / b to select a contact from the list.
English CONTROLS AND FEATURES Video or Voice call Incoming call Press BbC c to select Video call or Voice call, your screen will now display your call as shown below. Incoming calls on Skype will be displayed on the bottom right hand corner of your TV screen. You'll also hear a ring tone which can be adjusted using the VOLUME buttons on your remote control. Video call Own side Other side Incoming Call...
CONTROLS AND FEATURES When you receive a contact request, a pop-up menu will appear where you can choose to Accept, Block or Decline the request. You can add contacts to your list of contacts. When you press the YELLOW button, the Add Contact Type menu window will appear. Press B / b to select and press OK.
English CONTROLS AND FEATURES Dialer Settings You can call mobiles and landlines from this screen. Press B / b to select the Settings tab and press OK. Press B / b to select the Dialer tab. Press c and B / b to navigate this screen. The Settings window will appear.
CONTROLS AND FEATURES Intel® Wireless Display (Intel® WiDi) is supported on this TV. You can use your TV as second display for PC with Intel® Wireless Display. Hybrid TV Standard enables the TV to receive HbbTV services. TV services which support this feature often show “press RED” on the screen. NOTE: You need to configure a home network before using this feature (see page 12). a Press b Press c and B / b to select Hybrid TV Standard.
English CONTROLS AND FEATURES Using the Media Player Intel® WiDi Device Name ® The TV's Intel WiDi device name can be changed. a In the Network menu, press B / b to select Network Device Setup and press OK. b Press B / b to select Intel® WiDi Setup and press OK. c Press B / b to select Intel® WiDi Device Name and press OK. d Select Intel® WiDi Device Name and press OK. The Software Keyboard window will appear.
CONTROLS AND FEATURES a Using Media Player with USB b When Auto Start is enabled, you will be asked if you want to start the Media Player whenever a USB device is inserted. If Auto Start is disabled (or if you want to connect to a media server on the network), you must manually start the Media Player from the menu. Press BbC c to select a file or folder. Press OK to move to the next layer, or press BACK to return to the previous layer. When you select a file, press OK to play or view.
English CONTROLS AND FEATURES To sort files (if available): Viewing photo files (on a media server or USB device) You can sort files by file name (title) or date accordingly. a Press BbC c to highlight Sort and press OK. b Press B / b to select File Name (Title), New or Old and press OK. There are two types of viewing modes. Photos List (USB and Network Player Photo) This view allows you to search for photos in a grid format. The pictures are displayed using thumbnail data in each image file.
CONTROLS AND FEATURES To set Background Music (USB only): In this mode, only files located in the selected directory will be displayed. This view allows you to change the photo content manually. When moving from Photos List to Single View, the currently selected photo will be displayed. a a b Press c to view the next photo. Press C to view the previous photo. Press to display file status information (file number, photo title, resolution etc.).
English CONTROLS AND FEATURES Viewing movie files (on a media server or USB device) You can select movies from a Videos List of available files. Videos List (USB and Network Player Movie) Videos Music Photos Devices: /usb/sdb /12334567891123456789212345678931... VTS_01_1.mpg /usb/sdb Sort: File Name Date 16:40, Wed, 09 Jan 2013 00:00:33 During playback: • Press W to pause. PAUSE may not be available depending on the contents or media server. • To resume normal playback, press c (play).
CONTROLS AND FEATURES To register your TV to a DivX® account: You can resume playback from where it was last stopped. This TV allows you to play back files purchased or rented from DivX® Video-On Demand (VOD) services. When you purchase or rent DivX® VOD files on the internet, you will be asked to enter a registration code. Press v while playing the movie to memorize the stopped position. NOTE: • The memorized stopped position will be deleted in any of the following cases.
English CONTROLS AND FEATURES To playback DivX Plus HD content: • To play in fast reverse or fast forward directions, press CC / cc during playback. Each time you press the CC / cc, the playback speed will change. • This TV generates original chapter point in 10 % increments for 10 chapters in total, that are accessible by using the number buttons on the remote control. Playing music files (on a media server or USB device) You can listen to music from a Music List of available files.
CONTROLS AND FEATURES a Press QUICK to open the Quick Menu. b Press B / b to select Repeat. c Press c and B / b to select Off, All or 1. Mode English Other features To set the repeat mode: Description Off Files in the same folder are played back once. All Files in the same folder are repeatedly played back. 1 The same file is repeatedly played back. Panel Lock Panel Lock disables the buttons on the television. All buttons on the remote control can still be used.
English CONTROLS AND FEATURES The timers Netflix® To confirm the Netflix ESN (Electronic Serial Number) a b c Programme Timers – digital only This feature will set the television to go to a specific channel at a certain time. It can be used to view a particular programme, or by setting the mode to daily or weekly, can be used to view a series of programmes. In the Network menu, press B / b to select Smart Apps Setup and press OK. In Smart Apps Setup menu, select Netflix Setup and press OK.
CONTROLS AND FEATURES Press B / b to go through the list adding the details of the On Timer by using the number buttons and C / c to make selections. Power On Time (only for DTV Clock On mode): Set the time you prefer with the number buttons. Repeat (only for DTV Clock On mode): Select the desired On Timer operation (Once, Every Day, Mon-Fri, Mon-Sat, Sat-Sun). Input: Select a video input source (ATV, DTV Ant, EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC).
English CONTROLS AND FEATURES Digital on-screen information When viewing in digital mode, the on-screen information and programme guide provide access to programme details for all available channels. To display More Information: a b Press QUICK to open the Quick Menu. Press b to highlight More Information and press OK. On-screen Information icons Information a Icon Press , the information screen will appear giving details of the channel and programme currently being viewed.
CONTROLS AND FEATURES Genre selection/searching From the Guide screen, you can use the genre selection and search features. a Using Broadcast Guide a Select the on-screen Guide by pressing GUIDE, and the Guide screen will appear highlighting details of the channel and programme currently being viewed. This may take a few moments to appear.
English CONTROLS AND FEATURES Digital settings – parental control In order to prevent viewing of unsuitable films and programmes, channels and menus can be locked in digital mode. These can then only be accessed with a security code PIN. Parental PIN Setup a Press icon. Parental Setup The Parental Control feature allows you to block programmes according to their rating levels. If a PIN has been set, you will need to enter it before adjusting the level.
CONTROLS AND FEATURES Favourite Channel List a Each time you press C / c, All Channels, TV Channels, Radio Channels, Text Channels or Favourites is selected in order. Selecting favourite channels From the Quick Menu / Channel Options menu, it is possible to create a list of the digital channels that are watched most. Press LIST / C c to select the Favourite Channel list. a Press LIST to display Channel List. b Select the channel you want to add to your favourite list.
English CONTROLS AND FEATURES Digital settings – other settings Locking channels Locking Channels stops the viewing of digital channels, and they can only be accessed by entering the PIN. a Subtitles Select the channel you want to lock in your channel list. b In DTV mode, this feature will show subtitles on the screen in the selected language provided they are being broadcast. In the Quick Menu, press b to select Channel Options and press OK.
CONTROLS AND FEATURES The Common Interface Slot, situated on the side of the television, enables the insertion of a CAM (Conditional Access Module) and card. These are purchased from a service provider and allow additional subscription broadcasts to be viewed. For information, see a service provider. a b Insert the CAM and card into the Common Interface Slot, following the instructions provided with the CAM. A box will appear on screen to confirm that the CAM has been inserted. Press icon.
English CONTROLS AND FEATURES Software Licences The licences for the software used in this television are available for viewing. a System Information and Reset TV In the Get Help menu, press B / b to select Software Licences and press OK. A screen will appear displaying all the licensing information required for the televisions software. System Information This feature can be used to check the version of software currently installed.
CONTROLS AND FEATURES Sampling Clock Horizontal and Vertical Position Connect the PC (as shown in the ‘Connecting a computer’ section) and ensure that a picture is showing on the television screen. The picture position may now be adjusted to suit personal preference. a b c and B / b to highlight Picture icon. Press a In the Display Settings menu, press B / b to select PC Settings and press OK. b Press B / b to select Sampling Clock. c Press C / c to adjust until the picture clears.
English CONTROLS AND FEATURES Input selection and AV connections See page 8 for a detailed image showing recommended connections. Most media recorders and decoders send a signal through the SCART lead to switch the television to the correct Input socket. Labelling video input sources These input labels are shown in the input selector. You can label video inputs according to the devices you have connected to the TV.
CONTROLS AND FEATURES When connecting a surround sound amplifier to the digital audio output (Sony/Philips Digital Interface Format [S/ PDIF]), the following options can be selected or adjusted. a In the Sound menu, press B / b to select Digital Audio Output and press OK.
English CONTROLS AND FEATURES Using HDMI CEC Control Amplifier Control This is a new feature that uses CEC technology and allows you to control Toshiba HDMI CEC Control compatible devices from the television remote control via HDMI connection (page 10). When the Enable HDMI CEC Control item in the HDMI CEC Control Setup menu is set to On, individual functions also set to On will be activated. When Amplifier Control is set to on/off the connected HDMI CEC Control amplifier.
CONTROLS AND FEATURES HDMI CEC Control one touch play When connected equipment is switched on, HDMI CEC Control will automatically detect the television through the input selection. If the television is in Standby, it will be switched on automatically. Using MHL TV function You can use the following functions by connecting between the TV HDMI 3 port and a USB port of mobile phones etc. with an MHL cable.
English TEXT SERVICES Text services Navigating pages using Auto If Fastext is available, four coloured titles will appear at the base of the screen. This television has a multi-page text memory, which takes a few moments to load. It offers two Modes of viewing text – Auto will display Fastext, if available. List will save your four favourite pages. To access one of the four given subjects, press the relevant coloured button on the remote control.
TEXT SERVICES English Control buttons Below is a guide to the functions of the remote control text buttons. k To display the index/initial page: Press k to access the index/initial page. The one displayed is dependant on the broadcaster. TEXT To display a page of text: Press TEXT to display text. Press again to superimpose text over a normal picture. Press again to return to normal television viewing. Channels cannot be changed until this has been done.
Questions and Answers Below are the answers to some of the most common queries. Question Sound Why is there no sound or picture? Answer Check the television is not in Standby mode. Check the mains plug and all mains connections. Why is there a picture but no sound? Check all lead connections. No sound or unacceptable format sound may be received. Check the volume has not been turned down or that sound mute has not been selected. Check shared audio settings.
PROBLEM SOLVING Answer Picture Why are the colours wrong when an NTSC source is played? Connect the source via a SCART lead and play. Select Colour System from the Options menu. a Set the Colour to Auto and exit. b Go to the Picture menu and adjust the tint. Why don’t the controls of the television work? Check that Panel Lock is not On. Why doesn’t the remote control work? Check that batteries aren't exhausted or inserted incorrectly.
English PROBLEM SOLVING Question Answer Why don’t the networked devices work? The LAN cables are not connected properly or at all. Connect all cables (see page 12). Make sure your network address is set up correctly (see page 42). Why doesn’t the wireless network work? Check that the AP is powered on. General Why doesn’t the Media Player feature Make sure that devices are connected correctly. operate? Incorrect behaviour may occur with a USB Hub connection.
INFORMATION English Information Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket. Signal information for Mini D-sub 15 pin connector Pin No. Signal name Pin No. Signal name Pin No.
English INFORMATION Acceptable video or PC signals through the HDMI terminals The HDMI inputs on this TV only accept VGA, SVGA, XGA, WXGA, and SXGA signal formats which are compliant with VESA as shown in the table below. Since some PCs and HDMI or DVI devices input signals which are different from the resolution and frequency described in the table below, the following phenomenon may occur: incorrect display, false format detection, picture position failure, blur, or judder.
INFORMATION English Media Player Supported Format Media Player Photo Media Format JPEG File Extension .jpg .jpeg Video codec Audio codec JPEG USB Network yes yes yes no yes no – MPO .mpo MPO – BMP .bmp BMP – Note USB Data compatibility: JPEG Exif ver 2.2 Maximum viewable resolution: •JPEG 15360 × 8640 (Baseline) 1024 × 768 (Progressive) •BMP 9600 × 6400 Maximum number of files: 1000 / folder Network Data compatibility: JPEG Exif ver 2.
English INFORMATION Media Player Movie Music Media Format File Extension Video codec Audio codec USB Network MOV .mov H.264 (MPEG-4 AVC) MPEG-4 part2 MPEG-1/2 Layer3 MPEG-2/4 LC-AAC MPEG-4 HE-AAC yes no MP4 .mp4 .m4v H.264 (MPEG-4 AVC) MPEG-4 part12,14 MPEG-1/2 Layer3 MPEG-4 HE-AAC yes no H.264 (MPEG-4 AVC) MPEG-2/4 LC-AAC yes yes ASF .asf .wmv VC-1 (WMV9) WMA7/8/9 Std WMA9 Pro yes no DivX .divx .div DivX 3,4,5,6 yes no Xvid .
INFORMATION English Licence information • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • HDMI, the HDMI logo, and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. • This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated. Copyright© 1995-2009 Adobe Systems Incorporated. All rights reserved.
English INFORMATION EU Conformity Statement This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA TELEVISION CENTRAL EUROPE Sp. z o.o., ul. Pokoju 1 Biskupice Podgórne 55-040 Kobierzyce, Poland This product is labeled with the CE Mark in accordance with the related European Directives, notably Low Voltage Directive 2006/95/EC, Electromagnetic Compatibility Directive 2004/108/EC and RoHS Directive 2011/65/EU.
INFORMATION English Specifications and accessories Receiving systems DVB-T Broadcast systems/ Broadcast systems/channels channels UK UHF 21-68 PAL-I UHF UK21-UK69 France VHF 05-10 PAL-B/G UHF E21-E69 (VHF 01-05) VHF E2-E12, UHF 21-69 S1-S41 Germany VHF 05-12 SECAM-L UHF F21-F69 UHF 21-69 VHF F1-F10, B-Q Austria VHF 05-12 SECAM-D/K UHF R21-R69 UHF 21-69 VHF R1-R12 Switzerland VHF 05-12 UHF 21-69 Italy VHF 05-12 (D,E,F,G,H,H1,H2) UHF 21-69 Spain UHF 21-69 Netherlands VHF 05-12 UHF 21-69 Greece VHF 05-12 UHF
© TOSHIBA Television Central Europe Sp. z o.o. All rights reserved. Reproduction in whole or part without written permission is strictly prohibited. TOSHIBA Television Central Europe Sp. z o.o. ul.
